Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Accurate stress recovery for the two dimension fixed grid finite element method

Nadal, E., Bordas, Stephane Pierre Alain, Rodenas, J. J., Tarancon, J. E. and Tur, M. 2010. Accurate stress recovery for the two dimension fixed grid finite element method. Presented at: 10th International Conference on Computational Structures Technology, Valencia, Spain, 14-17 September 2010. Published in: Topping, B. H. V., Adam, J. M., Pallarés, F. J., Bru, R. and Romero, M. L. eds. Proceedings of the Tenth International Conference on Computational Structures Technology, Stirlingshire, UK. Civil-Comp Proceedings , vol. 93. Stirling: Civil-Comp Press, 10.4203/ccp.93.256

Full text not available from this repository.


Finite element analyses can be rather complicated because numerous industrial problems are geometrically complex thus requiring a great amount user intervention to create an appropriate mesh for the analysis. The mesh generation task can be simplified by the use of the fixed grid finite element method (FGFEM) [1] or other similar methods where the domain to be analyzed is embedded into a simple and easy-to-mesh domain, whose mesh is independent of the geometry of the component. The need for the use of recovery techniques is especially important in these implementations of the finite element method (FEM) as the accuracy of the results can be considerably low in the elements located along the boundary [2,3] because they are only partially located in the domain. This paper shows the adaptation of a stress recovery technique, developed for the standard FEM [4] and based on the superconvergent patch recovery technique [5], to the FGFEM framework, where the elements do not fit the boundary. The proposed procedure uses constraint equations to obtain a recovered stress field that, at each patch, satisfies the equilibrium and compatibility equations, thus providing very accurate results. Different problems (with and without an analytical solution) have been used to test the accuracy of the technique for linear and quadratic quadrilateral elements. The behavior of the proposed technique has been compared with a simplified version of the recovery technique where no satisfaction of equilibrium and compatibility equations has been imposed. The numerical analysis show the robustness and high accuracy of the results provided by the technique presented in this paper which are considerably more accurate than the FE results. The recovered stresses have been used to create an accurate recovery type error estimator. The numerical results also show the high importance of enforcing the satisfaction of the equilibrium equations during the recovery process. A comparison with a commercial FE code has shown the computational efficiency of analysis tools based on the use of FGFEM-type codes together with the recovery technique proposed in the paper.

Item Type: Conference or Workshop Item (Paper)
Status: Published
Schools: Engineering
Uncontrolled Keywords: recovery ; superconvergent patch recovery ; fixed grid finite element method ; extended finite element method ; generalized finite element method.
Additional Information: Paper number 256
Publisher: Civil-Comp Press
ISBN: 9781905088386
Last Modified: 04 Jun 2017 04:03

Citation Data

Actions (repository staff only)

Edit Item Edit Item