Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Browse by Schools (complete)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
  • Cardiff University (98082)
    • Centre for Advanced Manufacturing Systems At Cardiff (CAMSAC) (1393)
Group by: Creators | Item Type | Date of Publication | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Ö
Number of items at this level: 1387.

A

Abdel-Hamid, Radwan .H, Abu Adma, Maged A., Fahmy, Ashraf and Abdel Samed, Sherief F. 2009. Optimization of wind farm power generation using new unit matching technique. Presented at: 7th IEEE International Conference on Industrial Informatics (INDIN2009), Cardiff, Wales, 23-26 June 2009. Industrial Informatics, 2009. INDIN 2009. 7th IEEE International Conference on. pp. 378-383. 10.1109/INDIN.2009.5195834

Ahsan, Q., A., Siddiqui R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. An adaptable e-monitoring system for multi-loop processes. Presented at: Condition Monitoring and Diagnostic Engineering Management (COMADEM), Cranfield, UK, pp. 211-220.

Ahsan, Q., Amer, W., Al-Yami, M., Grosvenor, Roger Ivor and Prickett, Paul William 2006. Distributed process monitoring and management. Presented at: Proceedings IEEE ICEIS, Islamabad, Pakistan, pp. 336-341.

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor, Jennings, A. D., Prickett, Paul William and Frankowiak, M. R 2003. Design of a process and condition monitoring system using PIC based analogue data acquisition. Presented at: Condition Monitoring and Diagnostic Engineering Management (COMADEM), Vaxjo, Sweden, pp. 227-235.

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2004. Sweeping filter technique for frequency analysis. Presented at: Quality, Reliability, and Maintenance (QRM), Oxford, UK, PEP Ltd, pp. 185-189.

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2005. A compact monitoring system for process valves. Presented at: 10th IEEE International Conference on Emerging Technologies and Factory Automation, Catania, Italy, pp. 1034-1046.

Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2004. Distributed control loop performance monitoring architecture. Presented at: Control 2004, Bath, UK, University of Bath,

Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2004. A reduced traffic software model for distributed monitoring systems. Presented at: The 17th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM), Cambridge, UK, pp. 204-213.

Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2006. Distributed on-line system for process plant monitoring. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Engineering Manufacture 220 (2) , pp. 61-77. 10.1243/09544089JPME53
file

Ahuja, S., Dillon, D., Evans, Samuel Lewin, Holt, Catherine Avril, Davies, P. and Howes, J 2002. How many cross-links are needed in short segment posterior stablisation of thoraco-lumbar fractures? Presented at: 9th International Meeting on Advanced Spine Techniques (IMAST), Montreux, Switzerland,

Ahuja, S., M., Hunt C., Evans, Samuel Lewin and Davies, P. R 2002. Comparision of pull out strengths of pedicle screws augmented with Cortoss or Palacos LV. Presented at: 9th International Meeting on Advanced Spine Techniques (IMAST), Montreux Switzerland,

Al-kaab, Hamad, Naim, Mohamed Mohamed and Potter, Andrew Thomas 2007. Airlines' MRO and outsourcing: An operations management perspective. Presented at: 2007 ATRS World Conference, Berkeley, CA, USA, 21-23 June 2007.

Al-Kaabi, H., Potter, Andrew Thomas and Naim, Mohamed Mohamed 2005. Review of the configuration of airlines' aftermarket supply chains. Presented at: Logistics Research Network Annual Conference, Plymouth, UK, 7-9 September 2005.

Al-Kaabi, H., Potter, Andrew Thomas and Naim, Mohamed Mohamed 2006. Insights into European airlines' maintenance. Presented at: 2006 Air Transport Research Society World Conference, Nagoya, Japan, 26-28 May 2006.

Al-Kaabi, Hamad, Potter, Andrew Thomas and Naim, Mohamed Mohamed 2007. An outsourcing decision model for airlines' MRO activities. Journal of Quality in Maintenance Engineering 13 (3) , pp. 217-227. 10.1108/13552510710780258

Al-kaabi, Hamed, Potter, Andrew Thomas and Naim, Mohamed Mohamed 2007. Insights into the Maintenance, Repair, and Overhaul Configurations of European Airlines. Journal of Air Transportation (JAT) 12 (2) , pp. 27-42.

Al-Moadhen, Ahmed, Qiu, Renxi, Packianather, P., Ji, Z. and Setchi, Rossitza 2013. Integrating robot task planner with common-sense knowledge base to improve the efficiency of planning. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: General Track Proceedings. pp. 94-103.

Al-Musawi, Raheem, Brousseau, Emmanuel, Geng, Yanquan and Borodich, Feodor 2016. Insight into mechanics of AFM tip-based nanomachining: bending of cantilevers and machined grooves. Nanotechnology 27 (38) , pp. 385302-385316. 10.1088/0957-4484/27/38/385302
file

Al-Musawi, Raheem and Brousseau, Emmanuel Bruno Jean-Paul 2016. Influence of the mechanical behaviour of cantilevers on the topography of nano-scale grooves during AFM tip-based machining. Presented at: EUSPEN: 16th International Conference & Exhibition, Nottingham, UK, 30 May - 3 June 2016. Published in: Bointon, P., Leach, R. and Southon, N. eds. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: EUSPEN, pp. 383-384.

Aldridge, R. J. and Packianather, Michael Sylvester 2001. An easier route to expert systems in manufacturing. Presented at: 17th National Conference on Manufacturing Research (NCMR), Cardiff, UK, pp. 43-48.

Alexander, Anthony, Touboulic, Anne and Walker, Helen Lisbeth 2014. Making sense of SSCM: How companies express sustainable supply chain management issues in their public reports. Presented at: 1st Euroma Sustainability Forum, Groningen, The Netherlands, 24-25 March 2014.
file

Alexander, Anthony and Walker, Helen Lisbeth 2013. Sustainable supply chain management and decision making: A literature review of decision analysis, stakeholders and systems theory. Presented at: IPSERA2013, Nantes, France, 24-27 March 2013.

Alexander, Anthony and Walker, Helen Lisbeth 2013. Sustainable supply chain management: achieving optimal performance and outcomes. Presented at: 20th EurOMA Conference 2013, Dublin, Ireland, 7-12 June 2013.
file

Alexander, Anthony, Walker, Helen Lisbeth and Naim, Mohamed Mohamed 2014. Decision theory in sustainable supply chain management: a literature review. Supply Chain Management 19 (5/6) , pp. 504-522. 10.1108/SCM-01-2014-0007
file

Aljets, D., Chong, A., Wilcox, S., Holford, Karen Margaret, Pullin, Rhys and Eaton, Mark Jonathan 2009. Classification of delamination and matrix cracking in carbon fibre composite plates using Acoustic Emission (AE). Presented at: Proceedings of the ASME International Design Engineering Technical Conferences, and Computers and Information in Engineering Conference 2009 (DETC2009), San Diego, USA, pp. 29-36.

Alraziqi, Zaynab, Mukhtar, Nur Farah Hafizah and Brousseau, Emmanuel Bruno Jean-Paul 2016. Comparison of two AFM probe inspection techniques for three-dimensional tip characterisation. Presented at: EUSPEN: 16th International Conference & Exhibition, Nottingham, UK, 30 May - 3 June 2016. Published in: Bointon, P., Leach, R. and Southon, N. eds. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: EUSPEN, pp. 59-60.

Alyami, M., Grosvenor, Roger Ivor and Prickett, Paul William 2010. A Microcontroller-based Approach to Monitoring Pneumatic Actuators. International Journal of Production Research 48 (11) , pp. 3193-3205. 10.1080/00207540902812102

Alyami, M., Siddiqui, R. A., Grosvenor, Roger Ivor and Prickett, Paul William 2008. A pressure based approach to the monitoring of a pneumatic parallel gripper using a dsPIC. Presented at: Proceedings of Congress and Exhibition Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic, pp. 33-42.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor, Jennings, A. D. and Prickett, Paul William 2003. PIC micro-controller based machine tool monitoring system. Presented at: Congress and Exhibition on Condition Monitoring amd Diagnostic Engineering Managemen (COMADEM 2003), Vaxjo, Sweden, pp. 219-225.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2004. Machine tool signal analysis using sweeping filter technique. Presented at: Quality, Reliability, and Maintenance (QRM 2004), Oxford, UK, PEP Ltd, pp. 189-193.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2005. Machine tool condition monitoring system using tooth rotation energy system (TREE) techniques. Presented at: 10th IEEE International Conference on Emerging Technologies and Factory Automation, Catania, Italy, pp. 529-536.

Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2004. A distributed system based on sweeping filters for machine tool monitoring. Presented at: Congress & Exhibition on Condition Monitoring And Diagnostic Engineering Management (COMADEM 2004 International), Cambridge, UK, pp. 195-203.

Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2006. Sweeping filters and tooth rotation energy estimation (TREE) techniques for machine tool condition monitoring. International Journal of Machine Tools and Manufacture 46 (9) , pp. 1045-1052. 10.1016/j.ijmachtools.2005.07.031

Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2007. Machine tool condition monitoring using sweeping filter techniques. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 221 (1) , pp. 103-117. 10.1243/09596518JSCE133

Ang, Mei, Pham, Duc Truong, Soroka, Anthony John and Ng, Kok 2010. PCB assembly optimisation using the Bees Algorithm enhanced with TRIZ operators. Presented at: 36th Annual Conference of the IEEE Industrial Electronics Society, Glendale, AZ, USA, 7-10 November 2010. Proceedings - IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, Glendale, AZ, 7-10 Nov. 2010. Los Alamitos, CA: IEEE, pp. 2708-2713. 10.1109/IECON.2010.5675114

Ang, Mei Choo, Weng, Ng Kok, Pham, Duc Truong and Soroka, Anthony John 2013. Simulations of PCB assembly optimisation based on the Bees Algorithm with TRIZ-inspired operators. Presented at: IVIC 2013: International Visual Informatics Conference, Selangor, Malaysia, 13-15 November 2013. Published in: Badioze Zaman, Halimah, Robinson, Peter, Olivier, Patrick, Shih, Timothy and Velastin, Sergio eds. Advances in Visual Informatics. Springer Verlag, pp. 335-346. 10.1007/978-3-319-02958-0_31

Antony, J., Kumar, Maneesh and Labib, A. 2008. Gearing Six Sigma into UK manufacturing SMEs: results from a pilot study. Journal of the Operational Research Society 59 (4) , pp. 482-493. 10.1057/palgrave.jors.2602437

Antony, Jiju, Anand, Raj Bardhan, Kumar, Maneesh and Tiwari, M. K. 2006. Multiple response optimization using Taguchi methodology and neuro-fuzzy based model. Journal of Manufacturing Technology Management 17 (7) , pp. 908-925. 10.1108/17410380610688232

Antony, Jiju, Antony, Frenie Jiju, Kumar, Maneesh and Cho, Byung Rae 2007. Six sigma in service organisations: Benefits, challenges and difficulties, common myths, empirical observations and success factors. International Journal of Quality & Reliability Management 24 (3) , pp. 294-311. 10.1108/02656710710730889

Antony, Jiju, Bhuller, Anmol Singh, Kumar, Maneesh, Mendibil, Kepa and Montgomery, Douglas C. 2012. Application of Six Sigma DMAIC methodology in a transactional environment. International Journal of Quality & Reliability Management 29 (1) , pp. 31-53. 10.1108/02656711211190864

Antony, Jiju and Kumar, Maneesh 2011. Lean six sigma: research and practice. Denmark: BookBooN.com Ltd.

Antony, Jiju, Kumar, Maneesh and Madu, Christian N. 2005. Six sigma in small- and medium-sized UK manufacturing enterprises: Some empirical observations. International Journal of Quality & Reliability Management 22 (8) , pp. 860-874. 10.1108/02656710510617265

Antony, Jiju, Perry, Daniel, Wang, Chengbo and Kumar, Maneesh 2006. An application of Taguchi method of experimental design for new product design and development process. Assembly Automation 26 (1) , pp. 18-24. 10.1108/01445150610645611

Arumugam, V., Antony, Jiju and Kumar, Maneesh 2013. Linking learning and knowledge creation to project success in six Sigma Projects: An empirical investigation. International Journal of Production Economics 141 (1) , pp. 388-402. 10.1016/j.ijpe.2012.09.003

Aryee, G., Naim, Mohamed Mohamed and Lalwani, C. 2001. A conceptual ICT maturity model for supply chain management. Presented at: 17th National Conference on Manufacturing Research (NCMR), Cardiff, UK, 4-6 September 2001. Published in: Pham, Duc Truong, Dimov, Stefan Simeonov and O'Hagan, V. eds. Advances in Manufacturing Technology XV: Proceedings of the 17th National Conference on Manufacturing Research, Cardiff, UK, 4-6 September 2001. Bury St Edmunds: Professional Engineering Pub, pp. 25-30.

Aryee, G., Naim, Mohamed Mohamed and Lalwani, C. 2005. Supply chain integration using a maturity scale: Review of existing frameworks. Presented at: 16th Annual Conference of POMS, Chicago, IL., USA, 29 April – 2 May 2005.

Aryee, G., Naim, Mohamed Mohamed and Lalwani, C. S. 2002. The diffusion dynamics of advanced manufacturing technology (AMT) in the supply chain: A research framework. Presented at: 18th National Conference on Manufacturing Research, Leeds, UK, 10-12 September 2002.

Aryee, Gilbert, Mason, Robert John and Sarana, Mandip 2006. Exploring the cultural and trust aspects of business relationships for supply chain performance. Presented at: 13th International Annual EurOMA Conference, Glasgow, UK, 18-21 June 2006.

Aryee, Gilbert, Naim, Mohamed Mohamed, Lalwani, C. and Disney, Stephen Michael 2004. A maturity model for collaboration and technological integration in the supply chain. Presented at: 11th International Annual EurOMA Conference, Fontainebleau, France, 27-29 June 2004. Proceedings of the 11th International Annual EurOMA Conference, INSEAD, Fontainebleau, France, 27-29 June. Brussels: European Operations Management Association (EurOMA), pp. 33-42.

Aryee, Gilbert, Naim, Mohamed Mohamed, Lalwani, C. and Thomas, A. 2003. A migratory perspective of technology's role in supply chain integration - case research from the manufacturing sector. Presented at: 8th Cambridge International Manufacturing Symposium, Cambridge, UK, 25-26 September 2003.

Aryee, Gilbert, Naim, Mohamed Mohamed and Lalwani, Chandra 2008. Supply chain integration using a maturity scale. Journal of Manufacturing Technology Management 19 (5) , pp. 559-575. 10.1108/17410380810877258

Auerswald, J., Niedermann, P., Dias, F., Keppner, H., Bigot, Samuel, Beckers, M. C., Nestler, J., Hiller, K., Gessner, T. and Knapp, H. F. 2007. Bonding of glass chip based SPR sensors to thermoplastic microfluidics scaffolds. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.

Ayre, Wayne Nishio, Denyer, Stephen Paul and Evans, Samuel Lewin 2014. Ageing and moisture uptake in polymethyl methacrylate (PMMA) bone cements. Journal of the Mechanical Behavior of Biomedical Materials 32 , pp. 76-88. 10.1016/j.jmbbm.2013.12.010
file

Ayre, Wayne Nishio and Evans, Samuel Lewin 2012. Fatigue crack propagation in poly (methyl methacrylate) bone cement under different loading frequencies and stress intensities [Abstract]. Orthopaedic Proceedings: a supplement of Journal of Bone and Joint Surgery (British) 94-B (SXVIII) , p. 63.

Azcarate, S., Uriarte, I. L., Schoth, A., Bigot, Samuel, Tosello, G., Roth, S. and Staemmler, L. 2006. Hybrid tooling: A review of process chains for tooling microfabrication within 4M. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M, Grenoble, France,

B

Babai, M. Z., Boylan, J. E., Syntetos, Argyrios and Ali, M. M. 2016. Reduction of the value of information sharing as demand becomes strongly auto-correlated. International Journal of Production Economics 181 (A) , pp. 130-135. 10.1016/j.ijpe.2015.05.005
file

Bailey, Katherine Sarah, Edwards-Ambler, Susan, Disney, Stephen Michael, Simons, David Wyn and Lang, Tim 2001. UK food supply in the 21st century: The new dynamic. [Working Paper]. Chatham House Briefing Paper, Chatham House. Available at: http://www.chathamhouse.org/sites/default/files/pu...

Banomyong, R., Basnet, C., Childerhouse, P., Deakins, E., Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 2005. Internationalising the quick scan audit methodology. Presented at: 18th International Conference on Production Research, Salerno, Italy, 1-4 August 2005.

Barker, R. and Naim, Mohamed Mohamed 2005. Site Managers' perspective on contributors to waste in housebuilding supply chains. Presented at: Logistics Research Network Annual Conference, Plymouth, UK, 7-9 September 2005.

Barker, R. and Naim, Mohamed Mohamed 2008. Is supply chain thinking permeating the UK housebuilding industry? Findings from a survey of UK housebuilders. International Journal of Logistics: Research and Applications 11 (1) , pp. 67-80. 10.1080/13675560701504698

Barker, Ralph, Childerhouse, Paul, Naim, Mohamed Mohamed, Masat, Jan and Wilson, Derek 2004. Potential of Total Cycle Time Compression in Construction: Focus on Program Development and Design. Journal of Construction Engineering and Management 130 (2) , pp. 177-187. 10.1061/(ASCE)0733-9364(2004)130:2(177)
file

Barker, Ralph and Naim, Mohamed Mohamed 2004. Housebuilding Supply Chains: Remove Waste - Improve Value. International Journal of Logistics Management 15 (2) , pp. 51-64. 10.1108/09574090410700301

Barlow, James, Childerhouse, Paul, Gann, David, Hong-Minh, Séverine, Naim, Mohamed Mohamed and Ozaki, Ritsuko 2003. Choice and delivery in housebuilding: lessons from Japan for UK housebuilders. Building Research & Information 31 (2) , pp. 134-145. 10.1080/09613210302003

Barton, R. and Brousseau, Emmanuel Bruno Jean Paul 2009. Application of a methodology for assessing technology maturity. Presented at: Conference of the International Association for Management of Technology, (EuroMOT 2009), Glasgow, UK,

Bateman, N. and Mason, Robert John 2004. Carton damage in the supply chain – a spring board for co-operation. Presented at: 14th IAPRI World Conference on Packaging, Stockholm, Sweden, 13–16 June 2004.

Baxter, Geoff, Pullin, Rhys, Holford, Karen Margaret and Evans, Samuel Lewin 2007. Delta T source location for acoustic emission. Mechanical systems and signal processing 21 (3) , pp. 1512-1520. 10.1016/j.ymssp.2006.05.003

Baxter, M. G., Pullin, Rhys and Holford, Karen Margaret 2004. Detection of fatigue cracks in aircraft landing gear. Presented at: 26th European Conference on Acoustic Emission Testing, Berlin, Germany, pp. 331-341.

Baxter, M. G., Pullin, Rhys, Holford, Karen Margaret and Evans, Samuel Lewin 2005. Detection of fatigue crack growth in aircraft landing gear, 4 point bend specimens. Key Engineering Materials 293-94 , 193 -200. 10.4028/www.scientific.net/KEM.293-294.193

Beresford, Anthony Kenneth Charles, Nieuwenhuis, Paul Andre Henri Francois, Rhys, G. D. and Wells, Peter Erskine 2003. Review of the Automobile Rail Freight Sector. [Project Report]. London: Strategic Rail Authority.

Beresford, Anthony Kenneth Charles, Pettit, Stephen John, Xu, Qing and Williams, Sharon Jayne 2012. A study of dry port development in China. Maritime Economics & Logistics 14 (1) , pp. 73-98. 10.1057/mel.2011.17

Bergada, J. M., Davies, D. L. I., Xue, Yiqin and Kumar, S. 2009. Experimental investigation in axial piston pumps barrel dynamics. Presented at: 10th International Conference on fluid control, measurements and visualisation (FLUCOME), Moscow, Russia,

Beynon, Malcolm James and Wells, Peter Erskine 2010. Motor vehicle improvement preference ranking: A PROMETHEE and trigonometric differential evolution analysis of their chemical emissions. In: Pose, Marcos Gestal and Cebrián, Daniel Rivero eds. Soft Computing Methods for Practical Environment Solutions: Techniques and Studies, Hershey, PA: IGI Global, pp. 106-126.

Bigot, Samuel 2008. A Fuzzy Rule Induction System with a New Rule Space Representation Scheme. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, CIRP ICME '08, Naples, Italy,

Bigot, Samuel 2009. A study of specialisation and classification heuristics used in covering algorithms. Presented at: IPROM2009 Innovative Production Machines and Systems Fifth I*PROMS Virtual Conference, Cardiff, UK,

Bigot, Samuel 2011. A new rule space representation scheme for rule induction in classification and control applications. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 225 (7) , pp. 1018-1038. 10.1177/0959651810396292

Bigot, Samuel, Bissacco, G. and Valentinčič, J. 2011. Die-sinking micro EDM for complex 3D structuring - research directions. Presented at: 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, Germany, 8–10 November 2011.

Bigot, Samuel, Dimov, S S, Ivanov, A and Pham, D T 2004. Micro-EDM—recent developments and research issues. Journal of Materials Processing Technology 149 (1-3) , pp. 50-57. 10.1016/j.jmatprotec.2004.02.008

Bigot, Samuel, Dimov, SS and Pham, D T 2003. RULES-5: a rule induction algorithm for classification problems involving continuous attributes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217 (12) , pp. 1273-1286. 10.1243/095440603322769929
file

Bigot, Samuel, Dimov, Stefan Simeonov and Minev, R. 2010. Function and length scale integration study in emerging MST-based products. Presented at: 5th IPAS Fifth International Precision Assembly Seminar, Chamonix, France,

Bigot, Samuel, Dorrington, P. and Dimov, Stefan Simeonov 2011. Manufacturing routes costs comparison for emerging micro and nano technologies. Presented at: 7th International Conference on Multi-Material Micro Manufacture, Bourg en Bresse and Oyonnax, France, 17-19 November 2010. Published in: Fillon, Bertrand, Khan-Malek, Chantal and Dimov, Stefan eds. Proceedings of the 7th International Conference on Multi-Material Micro Manufacture, 17-19 November 2010 Bourg en Bresse and Oyonnax, France. Singapore: Research Publishing, pp. 199-202. 10.3850/978-981-08-6555-9_135

Bigot, Samuel, Islam, N., Wong, H., Brousseau, Emmanuel Bruno Jean Paul and Dorrington, P. 2009. Micro and nano manufacturing Technologies - Adoption Behaviour & Challenges. Presented at: 10th International Conference on Management of Innovative Technologies, Fiesa, Slovenia,

Bigot, Samuel, Lacan, Franck Andre, Hirshy, Hassan, Petkov, Petko Vladev, Babenko, M., Castro, G. G., Sweeney, J., Ugail, H. and Whiteside, B. 2014. Micro and nano structuring of sapphire for Micro Injection process investigation. Presented at: 9th International Conference on Micromanufacturing, Singapore, China, 25-28 March 2014.

Bigot, Samuel, Minev, Ekaterin, Dimov, Stefan Simeonov and Dobrev, Todor 2011. Function and length scale integration in innovative products - technical solutions and new organisational models. International Journal of Manufacturing Technology and Management 23 (3/4) , pp. 157-178. 10.1504/IJMTM.2011.045514

Bigot, Samuel, Minev, R., Dobrev, T., Dimov, Stefan Simeonov and Matthews, C. 2009. Function and length scale integration in micro/nano manufacturing. Presented at: 4M2009 -First International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, pp. 147-152.

Bigot, Samuel, Nestler, J., Dorrington, P. and Dimov, S. 2011. A costing methodology for products based on emerging micro and nano manufacturing technologies. Micro and Nanosystems 3 (3) , pp. 254-262.

Bigot, Samuel, Popov, Krastimir Borisov and Ivanov, Atanas 2005. A study of the micro EDM electrode wear. Presented at: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture, Forschungszentrum Karlsruhe, Karlsruhe, Germany, 29 June - 1 July 2005. Published in: Menz, W. and Dimov, Stefan Simeonov eds. Proceedings: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture. Amsterdam: Elsevier,

Bigot, Samuel, Surleraux, Anthony, Bissacco, G. and Valentinčič, J. 2012. A new modelling framework for die-sinking micro EDM. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.

Bigot, Samuel, Valentincic, J., Blatnik, O. and Junkar, M. 2006. Micro EDM parameters optimisation. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M2006, Grenoble, France,

Boehme, Tillmann, Potter, Andrew Thomas, Childerhouse, Paul, Corner, James and Deakins, Eric 2007. The development of a generic supply chain integration model using the Quick Scan Diagnostic Methodology. Presented at: 12th International Symposium on Logistics (ISL 2007), Budapest, Hungary, 8-10 July 2007. Published in: Pawar, Kulwant S., Lalwani, Chandra S. and Muffatto, Moreno eds. Proceedings of the 12th International Symposium on Logistics (ISL 2007). Nottingham: Centre for Concurrent Enterprise, University of Nottingham Business School, pp. 202-208.

Boehme, Tillmann, Williams, Sharon Jayne, Childerhouse, Paul, Deakins, Eric and Towill, Denis Royston 2011. Understanding system uncertainty in healthcare supplies. Presented at: 18th International Annual EurOMA Conference: Exploring Interfaces, Cambridge, UK, 3-6 July 2011.

Bouchard, C., Mantelet, F., Ziakovic, D., Setchi, Rossitza, Tang, Q. and Aoussat, A. 2007. Building a design ontology based on the conjoint trends analysis. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, pp. 593-598.

Bouchard, C., Mougenot, F., Omhover, J. F., Setchi, Rossitza and Aoussat, A. 2007. Building a domain ontology for designers: Towards a Kansei-based ontology. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, pp. 587-592.

Boute, M., Disney, Stephen Michael, Lambrecht, M. and Van Houdt, B. 2007. The impact of correlation in demand on lead times and safety stocks. Presented at: Manufacturing and Service Operations Management Conference, Beijing, China, 18-19 June 2007.

Boute, R., Disney, Stephen Michael, Lambrecht, M. R. and Van Houdt, B. 2006. The impact of order variance amplification / dampening on supply chain performance. Presented at: 14th International Working Seminar on Production Economics, Innsbruck, Austria, 20-26 February 2006.

Boute, R. N., Dejonckheere, J., Disney, Stephen Michael and Van de Velde, W. 2012. Bullwhip in a multi-product production setting. Tijdschrift voor Economic en Management 57 (3) , pp. 351-377.
file

Boute, R. N., Disney, Stephen Michael, Lambrecht, M. R., Van de Velde, W. and Van Houdt, B. 2005. Bullwhip reduction and win-win strategies. Presented at: 12th International EurOMA Conference, Budapest, Hungary, 19-22 June 2005. Published in: Demeter, Krisztina ed. Operations and Global Competitiveness: Papers of the 12th International EurOMA Conference and Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005. Budapest: Diamond Congress, pp. 697-706.

Boute, R. N., Disney, Stephen Michael, Lambrecht, M. R., Van de Velde, W. and Van Houdt, B. 2005. Win-win policies for the bullwhip problem. Presented at: "OM Frontiers: Winds of Change": Sixteenth Annual Conference of POMS, Chicago, IL, USA, 29 April - 2 May 2005.

Boute, R. N., Disney, Stephen Michael, Lambrecht, M. R. and Van Houdt, B. 2006. A win-win solution for the bullwhip problem. Presented at: International Conference on Information Systems, Logistics and Supply Chain (ILS'06), Lyon, France, 14-17 May 2006.

Boute, Robert N., Dejonckheere, Jeroen, Disney, Stephen Michael and Van de Velde, Wim 2012. Bullwhip in a multi-product production setting. Presented at: Stochastic Modelling for Inventory and Lead Time Management Decision Support ? A Symposium in Honour of Professor Marc Lambrecht, Leuven, Belgium, 31 October 2012.

Boute, Robert N., Disney, Stephen Michael, Lambrecht, Marc R. and Houdt, Benny Van 2014. Coordinating lead times and safety stocks under autocorrelated demand. European Journal of Operational Research 232 (1) , pp. 52-63. 10.1016/j.ejor.2013.06.036
file

Boute, Robert N., Disney, Stephen Michael, Lambrecht, Marc R. and Van Houdt, Benny 2008. A win-win solution for the bullwhip problem. Production Planning & Control 19 (7) , pp. 702-711. 10.1080/09537280802573767

Boute, Robert N., Disney, Stephen Michael, Lambrecht, Marc R. and Van Houdt, Benny 2009. Designing replenishment rules in a two-echelon supply chain with a flexible or an inflexible capacity strategy. International Journal of Production Economics 119 (1) , pp. 187-198. 10.1016/j.ijpe.2009.01.012

Boylan, John E., Chen, H., Mohammadipour, M. and Syntetos, Argyrios 2014. Formation of seasonal groups and application of seasonal indices. Journal of the Operational Research Society 65 , pp. 227-241. 10.1057/jors.2012.126
file

Bradshaw, T. P., Eaton, Mark Jonathan, Pullin, Rhys, Evans, Samuel Lewin and Featherston, Carol Ann 2006. Determination of damage levels of composite plates after low velocity impact using acoustic emission. Presented at: 27th European Conference on Acoustic Emission Testing (EWGAE 2006), Cardiff, UK,

Bradshaw, T.P., Eaton, Mark Jonathan, Pullin, Rhys, Evans, Samuel Lewin and Featherston, Carol Ann 2006. Determination of damage levels of composite plates after low velocity impacts using acoustic emission. Advanced Materials Research 13-14 , pp. 253-258. 10.4028/www.scientific.net/AMR.13-14.253

Braiwish, N. Y., Anayi, F. J., Fahmy, Ashraf and Eldukhri, E. E. 2014. Design optimisation of Permanent Magnet Synchronous Motor for electric vehicles traction using the Bees Algorithm. Presented at: 49th International Universities Power Engineering Conference (UPEC), Cluj-Napoca, Romania, 2-5 September 2014. Power Engineering Conference (UPEC), 2014 49th International Universities. IEEE, pp. 1-5. 10.1109/UPEC.2014.6934742

Brandon-Jones, Emma, Brandon-Jones, Alistair and Walker, Helen Lisbeth 2011. Sustainable services: A conceptual framework. Presented at: 18th International Annual EurOMA Conference: Exploring Interfaces, Cambridge, UK, 3-6 July 2011.

Bravo, M., Naim, Mohamed Mohamed and Potter, Andrew Thomas 2010. Transportation issues in the upstream biofuels supply chain. Presented at: International Association of Maritime Economists (IAME) 2010 Annual Conference,, Lisbon, Portugal,, 7-9 July 2010. Proceedings of the International Association of Maritime Economists (IAME) 2010 Annual Conference, Lisbon, Portugal, 7-9 July 2010. International Association of Maritime Economists (IAME),

Bravo, M., Naim, Mohamed Mohamed and Potter, Andrew Thomas 2010. A qualitative analysis of the management of biofuel supply chains: key-issues of the upstream segment. Presented at: Logistics Research Network Annual Conference 2010, Harrogate, Uk, 8-10 September 2010.

Breite, R., Potter, Andrew Thomas, Vanharanta, H. and Naim, Mohamed Mohamed 2003. Analysing the potential for mass customisation in primary production. Presented at: International Conference on Industrial Logistics 2003, Vaasa, Finland, 16-19 June 2003. Published in: Barros, Lilian, Helo, Petri and Kekäle, Tauno eds. Proceedings of International Conference on Industrial Logistics, Vaasa, Finland, 16-19 June 2003. Vaasa: University of Vaasa, pp. 67-75.

Brink, Patrick ten, Skinner, Ian, Fergusson, Malcolm, Haines, Dawn, Smokers, Richard, Burgwal, Erik van der, Gense, Raymond, Wells, Peter Erskine and Nieuwenhuis, Paul Andre Henri Francois 2005. Service contract to carry out economic analysis and business impact assessment of CO2 emissions reduction measures in the automotive sector. London, UK: Institute for European Environmental Policy.

Bristow, Gillian Irene and Wells, Peter Erskine 2005. Innovative discourse for sustainable local development: a critical analysis of eco-industrialism. International Journal of Innovation and Sustainable Development 1 (1/2) , pp. 168-179.

Britton, A. and Setchi, Rossitza 2010. Intuitive interaction with multifunctional smartphone interfaces. Presented at: I*PROMS'10 Innovative Production Machines and Systems, Cardiff, UK,

Britton, Andrew, Setchi, Rossitza and Marsh, A. 2013. Intuitive interaction with multifunctional mobile interfaces. Journal of King Saud University - Computer and Information Sciences 25 (2) , pp. 187-196. 10.1016/j.jksuci.2012.11.002

Brousseau, Emmanuel Bruno Jean Paul 2004. Intelligent techniques for automatic feature recognition in CAD models. PhD Thesis, Cardiff University.
file

Brousseau, Emmanuel Bruno Jean Paul, Al-Musawi, Raheem and Lebiez, Damien 2015. A hybrid roll-to-roll AFM set-up for high throughput tip-based nano-machining. Manufacturing Letters 6 , pp. 10-13. 10.1016/j.mfglet.2015.11.002

Brousseau, Emmanuel Bruno Jean Paul, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric and Gibaru, Olivier 2015. A simple and generic CAD/CAM approach for AFM probe-based machining. Presented at: 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015, University of Huddersfield, West Yorkshire, UK, 17-18 March 2015. pp. 362-368.

Brousseau, Emmanuel Bruno Jean Paul, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric, Gibaru, Olivier and Mayor, J. Rhett 2013. Towards CNC automation in AFM probe-based nano machining. Presented at: 8th International Conference on Manufacturing (ICOMM 2012), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM 2013). International Conference on MicroManufacturing, pp. 499-506.

Brousseau, Emmanuel Bruno Jean Paul, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel 2009. Technology maturity assessment of micro and nano manufacturing processes. Presented at: 4M2009 - International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, pp. 257-262.

Brousseau, Emmanuel Bruno Jean Paul, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel 2010. A methodology for evaluating the technological maturity of micro and nano fabrication processes. Presented at: Fifth International Precision Assembly Seminar, IPAS 2010, Chamonix, France, pp. 329-336.

Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Pham, Duc Truong 2010. Some recent advances in multi-material micro- and nano- manufacturing. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 161-180. 10.1007/s00170-009-2214-5

Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Setchi, Rossitza 2006. Learning and reasoning techniques for automatic feature recognition for CAD models. Presented at: I*PROMS'06 Innovative Production Machines and Systems, Cardiff, UK, pp. 77-82.

Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Setchi, Rossitza 2008. Knowledge acquisition techniques for feature recognition in CAD models. Journal of Intelligent Manufacturing 19 (1) , pp. 21-32. 10.1007/s10845-007-0043-7

Brousseau, Emmanuel Bruno Jean Paul and Eldukhri, Eldaw Elzaki 2011. Recent advances on key technologies for innovative manufacturing. Journal of Intelligent Manufacturing 22 (5) , pp. 675-691. 10.1007/s10845-009-0328-0

Brousseau, Emmanuel Bruno Jean Paul, Geng, Yanquan, Gensheimer, Michael and Bowen, Chris 2017. Increasing the processing speed of AFM tip-based nanomachining at the tool-workpiece interface. Presented at: 2017 World Congress on Micro and Nano Manufacturing, Kaohsiung, Taiwan, 27-30 March 2017. 2017 World Congress on Micro and Nano Manufacturing. pp. 343-346.

Brousseau, Emmanuel Bruno Jean Paul, Krohs, F., Caillaud, E., Dimov, Stefan Simeonov, Gibaru, O. and Fatikow, S. 2010. Development of a novel process chain based on Atomic Force Microscopy scratching for small and medium series production of polymer nanostructured components. Journal of Manufacturing Science and Engineering 132 (3) , pp. 305-315. 10.1115/1.4001481

Brousseau, Emmanuel Bruno Jean Paul, Krohs, F., Dimov, Stefan Simeonov, Griffiths, C. A., Scholz, S. G., Rees, A. and Fatikow, S. 2009. Investigation of a new process chain based on atomic force microscopy scratching. Presented at: Fifth International Conference on Multi-Material Micro Manufacture, 4M2009, Karlsruhe, Germany, pp. 267-270.

Brousseau, Emmanuel Bruno Jean Paul, Scholz, S. and Rees, A. 2010. Fabrication of 3D structures using Atomic Force Microscopy scratching. Presented at: Sixth International Conference on Multi-Material Micro Manufacture, 4M2010, Oyonnax, France, pp. 65-68.

Brownsword, M. and Setchi, Rossitza 2005. Picturing risk-connecting industries. Presented at: IEE Seminar on UML for Systems Engineers, London, UK, pp. 101-107.

Brownsword, M. and Setchi, Rossitza 2013. Formalised approach to the management of risk: Process formalisation. In: Yang, Guangfei ed. Multidisciplinary Studies in Knowledge and Systems Science, IGI Global, 214 -232.

Brownsword, Mike and Setchi, Rossitza 2011. A Formalised Approach to the Management of Risk: Process Formalisation. International Journal of Knowledge and Systems Science 2 (3) , pp. 63-80. 10.4018/jkss.2011070105

Budde Christensen, Thomas, Wells, Peter Erskine and Cipcigan, Liana Mirela 2012. Can innovative business models overcome resistance to electric vehicles? Better Place and battery electric cars in Denmark. Energy Policy 48 , pp. 498-505. 10.1016/j.enpol.2012.05.054

Byrne, Carlton Barrie Baylis, Grosvenor, Roger Ivor, Mason-Jones, Allan, Morris, Ceri E., O'Doherty, Daphne Maria, O'Doherty, Timothy and Prickett, Paul William 2011. Consideration of the condition based maintenance of marine tidal turbines. Presented at: 9th European Wave and Tidal Energy Conference (EWTEC), Southampton, UK, 5-9 September 2011.

C

Cannella, S., Ciancimino, E., Canca Ortiz, D. and Setchi, Rossitza 2010. Production inventory and enterprise system implementation: an ex-ante no-cost based evaluation. Lecture Notes in Business Information Processing 47 (Part 8) , pp. 291-303. 10.1007/978-3-642-12814-1_25

Cannella, Salvatore, Ciancimino, Elena, Framinan, Jose M. and Disney, Stephen Michael 2010. Los cuatros arquetipos de cadena de suministro? The four supply chain archetypes. Universia Business Review , pp. 134-149.

Carruthers-Watt, Benjamin Nigel, Xue, Yiqin and Morris, A. J 2010. A vision based system for strip tracking measurement in the finishing train of a hot strip mill. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. The 2010 IEEE International Conference on Mechatronics and Automation (August 4-7, 2010, Xi'an, China). Piscataway, NJ: IEEE, pp. 1115-1120. 10.1109/ICMA.2010.5589402

Chard, J., Thomas, A. J., John, Elwyn Graham and Davies, Alan 2009. Defining a bearing replacement strategy using Monte Carlo methods. Presented at: 7th International Conference on Manufacturing Research (ICMR09), Warwick, UK, 8-10 September 2009. Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09). pp. 485-489.

Charmeux, J. F., Minev, R., Dimov, Stefan, Minev, Ekaterin, Brousseau, Emmanuel Bruno Jean Paul and Harrysson, U. 2007. Benchmarking of three processes for producing castings incorporating micro/meso-scale features with a high aspect ratio. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (4) , pp. 577-588. 10.1243/09544054JEM693

Chaston, AM, Edwards, C, Evans, Samuel Lewin and Holford, Karen Margaret 2008. Shear Wave Ultrasonic Coupling Performance of Different Adhesives. Insight - Non-Destructive Testing and Condition Monitoring 50 (11) , pp. 633-636. 10.1784/insi.2008.50.11.633

Chen, Y. F. and Disney, Stephen Michael 2003. The order-up-to policy "sweet spot": using proportional controllers to eliminate the bullwhip problem. Presented at: EUROMA POMS Conference, Lake Como, Italy, 16-18 June 2003. Published in: Spina, G. ed. One world? One view of OM?: the challenges of integrating research & practice. Padova: Servizi Grafici Editoriali, pp. 551-560.
file

Chen, Y. F. and Disney, Stephen Michael 2007. The myopic Order-Up-To policy with a proportional feedback controller. International Journal of Production Research 45 (2) , pp. 351-368. 10.1080/00207540600579532
file

Chicksand, Daniel, Kumar, Naveen, Rehme, Jakob and Walker, Helen Lisbeth 2001. Global sourcing: implications for purchasing and logistics – a research synthesis. Presented at: Global Sourcing Workshop, Courchevel, France, 14-17 March 2011.

Chicksand, Daniel, Walker, Helen Lisbeth, Radnor, Zoe Jane and Johnston, Robin 2010. Theoretical perspectives in supply chain management. Presented at: 19th Annual IPSERA Conference, Lappeenranta, Finland, 16–19 May, 2010.

Chicksand, Daniel, Watson, Glyn, Walker, Helen Lisbeth, Radnor, Zoe Jane, Johnston, Bob and Liyange, Kapila 2010. Theoretical perspectives in purchasing and supply: An analysis of the literature. Presented at: 19th Annual IPSERA Conference: Supply Management - Missing Link in Strategic Management?, Lappeenranta, Finland, 6-19 May 2010.

Chicksand, Daniel, Watson, Glyn, Walker, Helen Lisbeth, Radnor, Zoe Jane and Johnston, Robert 2012. Theoretical perspectives in purchasing and supply chain management: an analysis of the literature. Supply Chain Management: an International Journal 17 (4) , 454 -472. 10.1108/13598541211246611

Childerhouse, P, Disney, Stephen Michael and Towill, Denis Royston 2003. Tailored toolkit to enable seamless supply chains. Presented at: ICPR 17: 17th International Conference on Production Research, Blacksburg, VA, USA, 3-7 August 2003. Published in: Diesenroth, M. P. ed. ICPR-17: 17th International Conference on Production Research: August 3-7, 2003, Blacksburg, Virginia, USA: electronic proceedings. Blacksburg, Va.: Virginia Tech,

Childerhouse, P., Deakins, E., Boehme, T., Towill, Denis Royston and Disney, Stephen Michael 2007. Supply chain integration: An international comparison of maturity. Presented at: 5th International Conference on Supply Chain Management and Information Systems, Melbourne, Australia, 9-12 December 2007.

Childerhouse, P., Deakins, E., Potter, Andrew Thomas, Banomyong, R., McCullen, P., Thomas, A., Böhme, T., Hosoda, T., Yaseen, E. A. and Towill, D. R. 2010. National cultural diversity and global supply chain management. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010. Published in: Pawar, K. S. and Lalwani, C. S. eds. Configuring Next Generation Supply Chains: Proceedings of the 15th International Symposium on Logistics (ISL 2010), Kuala Lumpur, Malaysia, 4-7 July 2010. Nottingham: Centre for Concurrent Enterprise, Nottingham University Business School, pp. 52-59.

Childerhouse, P., Disney, Stephen Michael and Naim, Mohamed Mohamed 1999. A quick scan method for supply chain diagnostic. Presented at: 4th International Symposium on Logistics, Florence, Italy, 11-14 July 1999. Published in: Muffatto, Moreno and Pawar, Kulwant eds. Proceedings of the 4th International Symposium on Logistics: Logistics in the Information Age, Florence, Italy, 11-14 July 1999. Padova: SGE, pp. 761-775.

Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2000. The uncertainty circle as a value stream audit tool: A case study to identify the BPR requirements of the European automotive sector. Presented at: 11th International Working Seminar on Production Economics, Igls, Austria, 21 - 25 February 2000. Published in: Grubbström, R. W. and Hinterhuber, H. H. eds. Pre-prints of the 11th International Working Seminar on Production Economics. pp. 119-130.
file

Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2004. Tailored toolkit to enable seamless supply chains. International Journal of Production Research 42 (17) , pp. 3627-3646. 10.1080/00207540410001696014
file

Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2006. Schedule volatility in the European automotive sector. Presented at: International Symposium on Logistics, Beijing, China, 9-12 July 2006.

Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2007. The effects of schedule volatility on supply chain performance. Presented at: 19th International Conference on Production Research, Valparaiso, Chile, 29 July - 2 August 2007.

Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2008. On the impact of order volatility in the European automotive sector. International Journal of Production Economics 114 (1) , pp. 2-13. 10.1016/j.ijpe.2007.09.008
file

Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2009. The effects of schedule volatility on supply chain performance. International Journal of Logistics Research and Applications 12 (4) , pp. 313-328. 10.1080/13675560903076206
file

Childerhouse, P., Naim, Mohamed Mohamed, Disney, Stephen Michael and Towill, Denis Royston 2001. Supply chain configuration: The application of Quick Scan. Presented at: UK Symposium on Demand Network Alignment, Liverpool, UK, 4-5 July 2001.

Childerhouse, Paul, Deakins, Eric, Böhme, Tillmann, Towill, Denis Royston, Disney, Stephen Michael and Banomyong, Ruth 2011. Supply chain integration: an international comparison of maturity. Asia Pacific Journal of Marketing and Logistics 23 (4) , pp. 531-552. 10.1108/13555851111165075

Childerhouse, Paul, Disney, Stephen Michael, Lockamy, A., McCormack, K. and Towill, Denis Royston 2003. Proven BPR trajectories for effective supply chain change management. Presented at: EUROMA POMS Conference, Lake Como, Italy, 16-18 June 2003. Published in: Spina, G. ed. One world? One view of OM? : the challenges of integrating research & practice. Padova: Servizi Grafici Editoriali, pp. 71-80.

Childerhouse, Paul, Lewis, Jayne, Naim, Mohamed Mohamed and Towill, Denis Royston 2003. Re-engineering a construction supply chain: a material flow control approach. Supply Chain Management: an International Journal 8 (4) , pp. 395-406. 10.1108/13598540310490143

Cipcigan, Liana Mirela, Wells, Peter Neil Temple, Nieuwenhuis, Paul Andre Henri Francois, Davies, Huw Charles, Whitmarsh, Lorraine E. and Papadopoulos, Pantelis 2012. Electricity as a transportation fuel: Bridging the gaps in the electric vehicle value chain. Presented at: EVVC-2012 European Electric Vehicle Congress, Brussels, Belgium, 19-22 November 2012.

Clarke, Alastair 2010. Applications of evolutionary algorithms to the design and set-up of racing cars. Presented at: Seventh International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September 2010. Published in: Topping, B. H. V., Adam, J. M., Pallarés, F. J., Bru, R. and Romero, M. L. eds. Proceedings of the Seventh International Conference on Engineering Computational Technology. Civil-Comp Proceedings , vol. 94. Civil-Comp Press, 10.4203/ccp.94.104

Cooke, Matthew, Williams, Sharon Jayne and Esain, Ann Elizabeth 2010. Lean Email: Applying 5S to emails. BMJ Careers 2010 (20 Jan) , 20000682.

Cooke, Philip Nicholas and Wells, Peter Erskine 1991. The geography of international strategic alliances: the cases of cable and wireless, Ericsson and Fujitsu. Environment and Planning A 23 (1) , pp. 87-106.

Cooke, Philip Nicholas and Wells, Peter Erskine 1991. Uneasy alliances: the spatial development of computing and communication markets. Regional Studies 25 (4) , pp. 345-354. 10.1080/00343409112331346537

Craik, Jonathan D., Laffer, Caroline H. L., Richards, Simon W., Walsh, Sean P. and Evans, Samuel Lewin 2013. Distal humerus cortical strains following total elbow arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227 (2) , pp. 120-128. 10.1177/0954411912463321

D

Davies, Alan 2001. An operator monitoring scheme for time-limited learning. Presented at: 17th National Conference on Manufacturing Research (NCMR), Cardiff, UK, 4-6 September 2001. Published in: Pham, D. T., Dimov, S. S. and O'Hagan, V. eds. Advances in manufacturing technology XV: proceedings of the17th National Conference on Manufacturing Research (Cardiff). Bury St Edmunds: Professional Engineering Publishing, pp. 407-414.

Davies, Alan 2012. Achieving sustainability in manufacturing via organisational and operational learning. International Journal of Sustainable Engineering 5 (2) , pp. 135-144. 10.1080/19397038.2011.628420

Davies, Alan, John, Elwyn Graham and Thomas, A. J. 2011. Integrating the last order costing model into a lean framework. International Journal of Manufacturing Research 6 (2) , pp. 160-174. 10.1504/IJMR.2011.040009

Davies, Alan, John, Elwyn Graham, Thomas, A. J. and Worrall, B. 2008. Last Order Costing (LOC) - An Iterative Methodology for the Continuous Improvement or Reduction of Manufacturing Costs. Presented at: 6th International Conference on Manufacturing Research (ICMR 2008), London, UK, pp. 833-838.

Davies, Alan, John, Elwyn Graham and Thomas, Andrew 2013. A flow direction weighting scheme for facility layout in cellular manufacturing. International Journal of Productivity and Performance Management 62 (2) , pp. 185-203. 10.1108/17410401311295731

Davies, Alan, Thomas, A. J. and John, Elwyn Graham 2014. Minimising transportation in manufacturing supply chains. International Journal of Sustainable Engineering 7 (2) , pp. 144-153. 10.1080/19397038.2013.801531

Davies, D. L., Watton, J., Xue, Yiqin and Williams, G. 2009. Experimental investigation into improved wrapper control of hot strip steel rolling mill downcoilers. Presented at: 2009 ASME Dynamic Systems and Control Conference, Hollywood, California, USA,

Davies, D. L. I., Watton, J., Xue, Yiqin and Williams, G. 2009. Mechanical design improvement to hot mill downcoiler. Presented at: 5th European Rolling Conference (ERC5), London, UK,

Davies, Dyfyr Llywel, Xue, Yiqin, Watton, John and Williams, G. A. 2010. Comparison between experimental and computer modelling results for a pneumatic/hydraulic hybrid cylinder. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. International Conference on Mechatronics and Automation (ICMA 2010, Xi'an, China). Piscataway, NJ: Institute of Electrical and Electronics Engineers ( IEEE ), pp. 2004-2008. 10.1109/ICMA.2010.5589197

Davies, Huw 2006. Experimental development of improved vehicle compatibility: final report. [Project Report]. Published project report, vol. PPR134. Wokingham, Berkshire: Transport Research Laboratory.

Davies, Huw Charles 2006. An experimental investigation of load cell wall response to quasi-static and impact loading when using an aluminium honeycomb barrier face. [Project Report]. Published project report, vol. PPR133. Wokingham, UK: Transport Research Laboratory. Available at: http://www.transportresearchfoundation.co.uk/PDF/2...

Davies, Huw Charles 2011. Development of a novel material for improved crash energy management in collisions involving vulnerable road users. International Journal of Crashworthiness 16 (4) , pp. 343-350. 10.1080/13588265.2011.586607

Davies, Huw Charles, Bryant, Michael James, Hope, Morgan and Meiller, C. 2011. Design, development, and manufacture of an aluminium honeycomb sandwich panel monocoque chassis for Formula Student competition. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 226 (3) , pp. 325-337. 10.1177/0954407011418578
file

Davies, Huw Charles and Clarke, Alastair 2013. Design and manufacture of components for motor sport using computer-aided design and rapid casting technology. Proc IMechE Part C: Journal of Mechanical Engineering Science 227 (12) , pp. 2751-2761. 10.1177/0954406213479079

Davies, Huw Charles and Clarke, Alastair 2013. Design and manufacture of components for motorsport using computer aided design and rapid casting technology. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227 (12) , pp. 2751-2761. 10.1177/0954406213479079

Davies, Huw Charles, Holford, Karen Margaret, Assoune, A., Trioulier, B. and Courtney, W. 2009. Pedestrian protection using a shock absorbing liquid (SALi) based bumper system. Presented at: 21st International Technical Conference on the Enhanced Safety of Vehicles, Stuttgart, Germany, , vol. 09-002.

Davies, Huw Charles, Nieuwenhuis, Paul Andre Henri Francois, Wells, Peter Erskine, Newman, Daniel and Donovan, Ceri 2012. ENEVATE Project - electric vehicle market drivers and e-mobility voncepts. Presented at: EEVC, Brussels, Belgium, 19 - 22 November 2012.

Davies, Huw Charles, Wells, Peter Erskine, Nieuwenhuis, Paul Andre Henri Francois, Newman, Daniel, Chase, A. and Alberts, G. 2014. Aligning industrial, transport and environmental policies for EVs in the low carbon vehicle ecosystem: The example of the UK. Presented at: European Electric Vehicle Congress, Brussels, Belgium, 2 - 5 December 2014.

Davies, I., Mason, Robert John and Lalwani, Chandra 2004. An evaluation of the use of freight exchanges in general haulage. Presented at: 9th International Symposium on Logistics (ISL 2004), Bangalore, India, 11-14 July 2004. Published in: Pawar, Kulwant ed. Logistics and Global Outsourcing: Proceedings of the 9th International Symposium on Logistics, Bangalore, India, 11th - 14th July 2004. Nottingham: Centre for Concurrent Enterprise, pp. 385-391.

Dawoodi, A. and Evans, Samuel Lewin 2009. Effect of monomer to polymer ratio and initiator/activator ratios on mechanical and thermal characterisations of acrylic bone cement. Presented at: European Society for Biomaterials, Lausanne, Switzerland,

Dejonckheere, J. and Disney, Stephen Michael 2000. Transfer function analysis of forecasting induced bullwhip in supply chains. Presented at: 11th International Working Seminar on Production Economics, Igls, Austria, 21 - 25 February 2000. Published in: Grubbström, R. W. and Hinterhuber, H. H. eds. Pre-prints of the 11th International Working Seminar on Production Economics. pp. 73-84.

Dejonckheere, J., Disney, Stephen Michael, Lambrecht, M. and Towill, Denis Royston 2003. The dynamics of aggregate planning. Production Planning & Control 14 (6) , pp. 497-516. 10.1080/09537280310001621967
file

Dejonckheere, J., Disney, Stephen Michael, Lambrecht, M. R. and Towill, Denis Royston 2002. The impact of information sharing in supply chains. Presented at: 16th Triennial Conference of the International Federation of Operational Research Societies (IFORS), Edinburgh, Scotland, 8-12 July 2002.

Dejonckheere, J., Disney, Stephen Michael, Lambrecht, M. R. and Towill, Denis Royston 2002. Transfer function analysis of forecasting induced bullwhip in supply chains. International Journal of Production Economics 78 (2) , pp. 133-144. 10.1016/S0925-5273(01)00084-6

Dejonckheere, J., Disney, Stephen Michael, Lambrecht, M. R. and Towill, Denis Royston 2003. Measuring and avoiding the bullwhip effect: A control theoretic approach. European Journal of Operational Research 147 (3) , pp. 567-590. 10.1016/S0377-2217(02)00369-7
file

Dejonckheere, J., Disney, Stephen Michael, Lambrecht, M. R. and Towill, Denis Royston 2004. The impact of information enrichment on the Bullwhip effect in supply chains: A control engineering perspective. European Journal of Operational Research 153 (3) , pp. 727-750. 10.1016/S0377-2217(02)00808-1
file

Dejonckheere, Jeroen, Disney, Stephen Michael, Farasyn, Ingrid, Janssen, Freek, Lambrecht, Marc, Towill, Denis Royston and Van de Velde, Wim 2002. Production and inventory control: The variability trade-off. Presented at: 9th EUROMA Conference, Copenhagen, Denmark, 2-4 June 2002.

Dejonckheere, Jeroen, Disney, Stephen Michael, Farasyn, Ingrid, Janssen, Freek, Lambrecht, Marc, Towill, Denis Royston and Van de Velde, Wim 2002. An analytical solution to availability in supply chains. Presented at: Sixteenth Triennial Conference of the International Federation of Operational Research Societies, Edinburgh, UK, 8-12 July 2002.

Dejonckheere, Jeroen, Disney, Stephen Michael, Lambrecht, Marc and Towill, Denis Royston 2000. Matching your orders to the needs and economies of your supply chain. Presented at: 7th International Annual EUROMA Conference, Ghent, Belgium, 04-07 June 2000.

Dhandapani, V., Potter, Andrew Thomas and Naim, Mohamed Mohamed 2003. Applying lean thinking in developing countries: A case study of an Indian steel plant. Presented at: 8th Logistics Research Network Conference, London, UK, 10-12 September 2003. Published in: Menachof, David A. ed. Logistics Research Network 2003 Conference Proceedings : Enhancing Global Trade through Supply Chain Solutions, London, UK, 10-12 September 2003. Corby: Institute of Logistics and Transport, pp. 99-106.

Dhandapani, Vijay, Potter, Andrew Thomas and Naim, Mohamed Mohamed 2004. Applying lean thinking: a case study of an Indian steel plant. International Journal of Logistics: Research and Applications 7 (3) , pp. 239-250. 10.1080/13675560412331298491

Dhingra, S., Potter, Andrew Thomas and Barton, Richard Anthony 2011. The diagnosis of complexity within a medical consumables manufacturing company. Presented at: 16th International Symposium on Logistics (ISL 2011), Berlin, Germany, 10-13 July 2011.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Minev, Roussi and Bigot, Samuel 2012. Micro- and nano-manufacturing: Challenges and opportunities. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226 (1) , pp. 3-15. 10.1177/0954406211422972

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Setchi, Rossitza 2005. Automatic extraction of rules for feature recognition in solid models. Presented at: 1st I*PROMS: Intelligent Production Machines and Systems, Online, 4-15 July 2005. Published in: Pham, D. ed. Intelligent Production Machines And Systems - First I*proms Virtual Conference Proceedings. Elsevier, pp. 49-54.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Setchi, Rossitza 2007. A hybrid method for feature recognition in CAD models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , pp. 79-96.

Dimov, Stefan Simeonov, Matthews, C. W., Brousseau, Emmanuel Bruno Jean Paul, Bigot, Samuel, de Grave, A., Fillon, B., Weinzierl, M., Engel, U., Johander, P., Jung, E., Kirby, P. B., Mattsson, L., Richter, M. and Schoth, A. 2009. 4M Network of Excellence, Progress Report 2009. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany, pp. 1-9.

Dimov, Stefan Simeonov, Pham, Duc Truong, Bigot, Samuel, Ivanov, Atanas and Popov, Krastimir Borisov 2004. A Study of the Accuracy of the Micro Electrical Discharge Machining Drilling Process. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. Proceedings of the 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering,( IDMME) (Bath, UK). University of Bath, pp. 1-12.

Dimov, Stefan Simeonov, Setchi, Rossitza and Brousseau, Emmanuel Bruno Jean Paul 2004. Automatic feature recognition a hybrid approach. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 04) (Bath,UK). University of Bath, p. 59.

Ding, Ziqian, Stoichkov, Vasil, Horie, Masaki, Brousseau, Emmanuel Bruno Jean-Paul and Kettle, Jeffrey 2016. Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications. Solar Energy Materials & Solar Cells 157 , pp. 305-311. 10.1016/j.solmat.2016.05.053
file

Disney, Stephen Michael 1999. The Quick Scan method for supply chain diagnostics. Presented at: Creating Value with Supply Chain Management - Third Annual Conference of the Tulane Consortium for Supply Chain Management, Tulane University, New Orleans, LA, USA, 26-27 March 1999.

Disney, Stephen Michael 2005. Supply chain aperiodicity, bullwhip and stability analysis with Jury's Inners. Presented at: 17th Triennial Conference of the International Federation of Operational Research Societies (IFORS), Waikiki, Hawaii, HI, USA, 11-15 July 2005.

Disney, Stephen Michael 2007. The dynamics of material flow in supply chains. Presented at: 49th Annual Conference of the Operational Research Society, Edinburgh, UK, 4-6 September 2007.

Disney, Stephen Michael 2008. Supply chain aperiodicity, bullwhip and stability analysis with Jury's inners. IMA Journal of Management Mathematics 19 (2) , pp. 101-116. 10.1093/imaman/dpm033

Disney, Stephen Michael 2009. Revisiting activity sampling: a fresh look at binomial proportion confidence intervals. Presented at: Logistics Research Network Annual Conference 2009, Cardiff, UK, 9-11 September 2009.

Disney, Stephen Michael 2009. Bullwhip effect in supply chains.

Disney, Stephen Michael 2009. Editorial for the special issue: papers from the 19th international conference on production research. International Journal of Logistics Research and Applications 12 (4) , pp. 231-232. 10.1080/13675560903075919
file

Disney, Stephen Michael 2013. Cracking the bullwhip. Synergy : The Magazine for Cardiff Business School 14 , p. 14.

Disney, Stephen Michael, Bogataj, Marija and Tang, Ou 2012. Editorial: Special issue of the Sixteenth International Working Seminar on Production Economics, Innsbruck 2010. International Journal of Production Economics 140 (2) , pp. 557-558.

Disney, Stephen Michael, Boute, R N, Lambrecht, M and Van Houdt, B 2007. An integrated production and inventory model to dampen upstream demand variability in the supply chain. European Journal of Operational Research 178 (1) , pp. 121-142. 10.1016/j.ejor.2006.01.023

Disney, Stephen Michael, Chen, Frank, Gaalman, G., Lambrecht, Marc, Towill, Denis Royston, Van de Velde, W. and Warburton, R. D. H. 2006. The economics of the bullwhip effect. Presented at: INFORMS 2006 International, Hong Kong, China, 25-28 June 2006.

Disney, Stephen Michael and Christopher, Martin 2003. The supply chain strategy conundrum: To be lean or agile or to be lean and agile. Supply Chain Practice 5 (3) , pp. 30-45.

Disney, Stephen Michael, Farasyn, I, Lambrecht, M., Towill, Denis Royston and Van de Velde, W. 2006. Taming the bullwhip effect whilst watching customer service in a single supply chain echelon. European Journal of Operational Research 173 (1) , pp. 151-172. 10.1016/j.ejor.2005.01.026
file

Disney, Stephen Michael, Farasyn, I., Lambrecht, M., Towill, Denis Royston and Van de Velde, W. 2003. Creating win-win scenarios from the bullwhip problem - By design not accident. Presented at: EUROMA/ POMS Joint International Conference 2003, Cernobbio, Italy, 16-18 June 2003. Published in: Spina, Gianluca ed. One world? One view of OM?: The Challenges of Integrating Research & Practice. Proceedings of EUROMA/ POMS Joint International Conference, Cernobbio, Lake Como, June 16th-18th 2003. Padova: Servizi Grafici Editoriali, pp. 561-570.

Disney, Stephen Michael, Farasyn, I., Lambrecht, M., Towill, Denis Royston and Van de Velde, W. 2003. Taming the Bullwhip whilst watching customer service levels. Presented at: EURO/INFORMS Joint International Meeting, Istanbul, Turkey, 6-10 July 2003.

Disney, Stephen Michael, Farasyn, Ingrid, Lambrecht, Marc and Towill, Denis Royston 2004. The golden ratio in production and inventory control. Presented at: POM 2004: 2nd World POM Conference and the 15th Annual POM Conference, Cancun, Mexico, 30 April – 3 May 2004.

Disney, Stephen Michael, Farasyn, Ingrid, Lambrecht, Marc, Towill, Denis Royston and Van de Velde, Wim 2003. Forecasting the ARMA demand pattern. Presented at: EURO/INFORMS Joint International Meeting, Istanbul, Turkey, 06-10 July 2003.

Disney, Stephen Michael, Farasyn, Ingrid, Lambrecht, Marc R., Towill, Denis Royston and Van De Velde, Wim 2007. Controlling bullwhip and inventory variability with the golden smoothing rule. European Journal of Industrial Engineering 1 (3) , pp. 241-265. 10.1504/EJIE.2007.014686

Disney, Stephen Michael, Gaalman, Gerard, Hedenstierna, Carl and Hosoda, Takamichi 2015. Fill rate in a periodic review order-up-to policy under auto-correlated normally distributed, possibly negative, demand. International Journal of Production Economics 170 (Part B) , pp. 501-512. 10.1016/j.ijpe.2015.07.019
file

Disney, Stephen Michael, Gaalman, Gerard and Hosoda, Takamichi 2012. Review of stochastic cost functions for production and inventory control. Presented at: 17th International Working Seminar of Production Economics, Innsbruck, Austria, 20-24 February 2012. pp. 117-128.
file

Disney, Stephen Michael and Grubbström, R. W. 2003. The economic consequences of a production and inventory control policy. Presented at: 17th International Conference on Production Research (ICPR), Blacksburg, VA, USA, 3-7 August 2003.

Disney, Stephen Michael and Grubbström, R. W. 2004. Economic consequences of a production and inventory control policy. International Journal of Production Research 42 (17) , pp. 3419-3431. 10.1080/00207540410001727640
file

Disney, Stephen Michael, Holmström, Jan, Kaipia, Riikka and Towill, Denis Royston 2003. Exploitation of VMI information for production planning and inventory control. Presented at: EUROMA/ POMS Joint International Conference 2003, Cernobbio, Italy, 16-18 June 2003. Published in: Spina, Gianluca ed. One world? One view of OM?: The Challenges of Integrating Research & Practice. Padova: Servizi grafici editoriali, pp. 571-580.

Disney, Stephen Michael, Holmström, Jan, Kaipia, Rikka and Towill, Denis Royston 2001. Implementation of a VMI production and distribution control system. Presented at: 6th International Symposium on Logistics, Salzburg, Austria, 09-10 July 2001.
file

Disney, Stephen Michael, Holweg, Matthias, Hines, Peter and Naim, Mohamed Mohamed 2000. Modelling information flows in the automotive supply chain - A simulation based sensitivity analysis of potential improvements. Presented at: Logistics Research Network Annual Conference 2000, Cardiff, UK, 06-08 September 2000.

Disney, Stephen Michael and Hosada, Takamichi S. 2007. The benefit of altruistic behaviour achieved by the OUT policy with unmatched proportional feedback gains in a two-echelon supply chain. Presented at: 19th International Conference on Production Research, Valparaiso, Chile, 29 July - 2 August 2007.
file

Disney, Stephen Michael, Hoshiko, L., Polley, L. and Weigel, C. 2013. Removing bullwhip from Lexmark's toner operations. Presented at: Production and Operations Management Society Annual Conference, Denver, CO, USA, 3-6 May 2013.

Disney, Stephen Michael and Hosoda, Takamichi 2009. Altruistic behaviour in a two-echelon supply chain with unmatched proportional feedback controllers. International Journal of Intelligent Systems Technologies and Applications 6 (3/4) , pp. 269-286. 10.1504/IJISTA.2009.024257
file

Disney, Stephen Michael, Lambrecht, Marc, Towill, Denis Royston and Van de Velde, Wim 2008. The value of coordination in a two-echelon supply chain. IIE Transactions 40 (3) , pp. 341-355. 10.1080/07408170701488003
file

Disney, Stephen Michael, Maltz, Arnold, Wang, Xun and Warburton., Roger D. H. 2016. Inventory management for stochastic lead times with order crossovers. European Journal of Operational Research 248 (2) , pp. 473-486. 10.1016/j.ejor.2015.07.047
file

Disney, Stephen Michael, McCullen, P. and Saw, R. J. 2006. Dynamic supply chain design: Square root law for bullwhip. Presented at: 11th International Symposium on Logistics (ISL 2006), Beijing, China, 9-11 July 2006. Published in: Pawar, Kulwant S. ed. Competitive Advantage Through Global Supply Chains: Proceedings of the 11th International Symposium on Logistics (11th ISL), Beijing, China, 9-11 July 2006. Nottingham, UK: Centre for Concurrent Enterprise, University of Nottingham Business School,
file

Disney, Stephen Michael and McCullen, Peter 2013. Global supply chain design: understanding costs through dynamic modelling. Presented at: 18th International Symposium on Logistics (ISL), Vienna, Austria, 7-10 July 2013.

Disney, Stephen Michael and Naim, Mohamed Mohamed 1999. Improving supply chain efficiency. Presented at: Creating Value with Supply Chain Management - Third Annual Conference of the Tulane Consortium for Supply Chain Management, Tulane University, New Orleans, LA, USA, 26-27 March 1999.

Disney, Stephen Michael, Naim, Mohamed Mohamed and Potter, Andrew Thomas 2004. Assessing the impact of e-business on supply chain dynamics. International Journal of Production Economics 89 (2) , pp. 109-118. 10.1016/S0925-5273(02)00464-4
file

Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 1997. Development of a fitness measure for an inventory and production control system. Presented at: 2nd International Conference on Genetic Algorithms in Engineering Systems: Innovations and Applications (GALESIA 97), Glasgow, UK, 2-4 September 1997. Proceedings of 2nd International Conference on Genetic Algorithms in Engineering Systems: Innovations and Applications, 1997, GALESIA 97, Glasgow, UK, 2-4 September 1997. Institute of Electrical and Electronics Engineers (IEEE), pp. 351-356. 10.1049/cp:19971205
file

Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 1997. Dynamic simulation modelling for lean logistics. International Journal of Physical Distribution & Logistics Management 27 (3/4) , pp. 174-196. 10.1108/09600039710170566

Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 1998. Genetic algorithm based optimisation of a class of inventory control systems. Presented at: 10th International Working Seminar of Production Economics, Igls, Austria, 16-20 February 1998. Published in: Grubbström, R. W. ed. Pre-prints : Tenth International Working Seminar on Production Economics. Innsbruck: Kongresszentrum IGLS, pp. 191-204.

Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 1999. A decision support system for evaluation of European logistics outsourcing. Presented at: 15th International Conference on Production Research (ICPR-15), Limerick, Ireland, 9-12 August 1999. Published in: Hillery, M. T. and Lewis, H. J. eds. ICPR-15 Manufacturing for a Global Market: Proceedings of the Fifteenth Conference of the International Foundation for Production Research. Limerick: University of Limerick, Department of Manufacturing and Operations Engineering, pp. 625-628.

Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 1999. Improving the effectiveness of supply chains. Presented at: 15th International Conference on Production Research (ICPR-15), Limerick, Ireland, 9-12 August 1999. Published in: Hillery, M. T. and Lewis, H. J. eds. ICPR-15 Manufacturing for a Global Market: Proceedings of the Fifteenth Conference of the International Foundation for Production Research. Limerick: University of Limerick, Department of Manufacturing and Operations Engineering, pp. 637-640.

Disney, Stephen Michael, Naim, Mohamed Mohamed and Towill, Denis Royston 2000. Genetic algorithm optimisation of a class of inventory control systems. International Journal of Production Economics 68 (3) , pp. 259-278. 10.1016/S0925-5273(99)00101-2
file

Disney, Stephen Michael, Naim, Mohamed Mohamed, Williams, Sharon, Nussey OBE, Ian and Grubbström, Robert W. 2015. In Memoriam: Professor Denis R. Towill 1933-2015. International Journal of Production Economics 170 , iii-v. 10.1016/S0925-5273(15)00417-X

Disney, Stephen Michael and Petropoulos, Fotios 2015. Forecast combinations using multiple starting points. Presented at: Logistics and Operations Management Section Annual Conference, Cardiff, 9 January 2015.

Disney, Stephen Michael, Potter, Andrew Thomas and Gardner, Bernard Maples 2003. The impact of vendor managed inventory on transport operations. Transportation Research Part E Logistics and Transportation Review 39 (5) , pp. 363-380. 10.1016/S1366-5545(03)00014-0
file

Disney, Stephen Michael, Potter, Andrew Thomas and Gardner, Bernard Maples 2004. The impact of VMI on transport operations. In: Lalwani, C., Mason, Robert John, Potter, Andrew Thomas and Yang, Biao eds. Transport in Supply Chains, Cardiff: Cardiff University: Cardiff Business School,

Disney, Stephen Michael and Towill, Denis Royston 2001. The effect of VMI on the bullwhip effect. Presented at: 16th International Conference on Production Research (ICPR - 16), Prague, Czech Republic, 29 July - 3 August 2001.

Disney, Stephen Michael and Towill, Denis Royston 2001. Application of discrete linear control theory to vendor managed inventory. Presented at: Second Course on Laplace Transform and Input-Output Techniques for MRP, Bled, Slovenia, 22-25 February 2001.

Disney, Stephen Michael and Towill, Denis Royston 2001. A linear PIC system that can operate in a non-linear world. Presented at: IFAC Manufacturing, modelling, management, and control (MIM) 2001, Prague, Czech Republic, 2-4 August 2001. Published in: Kovacs, George ed. Manufacturing, modelling, management, and control (MIM 2001): a proceedings volume from the IFAC Workshop, Prague, Czech Republic, 2-4 August 2001. Oxford: Pergamon,

Disney, Stephen Michael and Towill, Denis Royston 2002. Avoiding inventory drift in supply chains. Presented at: 2002 IFIP Conference in Inventory Control, Budapest, Hungary, 2002.

Disney, Stephen Michael and Towill, Denis Royston 2002. Inventory drift and instability in order-up-to policies. Presented at: 12th International Symposium on Inventories, Budapest, Hungary, 19-24 August 2002.

Disney, Stephen Michael and Towill, Denis Royston 2002. A robust and stable analytical solution to the production and inventory control problem via a z-transform approach. Presented at: 12th International Working Conference on Production Economics, Igls-Innsbruck, Austria, 18-22 February 2002.

Disney, Stephen Michael and Towill, Denis Royston 2002. A discrete transfer function model to determine the dynamic stability of a vendor managed inventory supply chain. International Journal of Production Research 40 (1) , pp. 179-204. 10.1080/00207540110072975

Disney, Stephen Michael and Towill, Denis Royston 2002. A procedure for the optimization of the dynamic response of a Vendor Managed Inventory system. Computers & Industrial Engineering 43 (1-2) , pp. 27-58. 10.1016/S0360-8352(02)00061-X
file

Disney, Stephen Michael and Towill, Denis Royston 2003. Vendor-managed inventory and bullwhip reduction in a two-level supply chain. International Journal of Operations & Production Management 23 (6) , pp. 625-651. 10.1108/01443570310476654
file

Disney, Stephen Michael and Towill, Denis Royston 2003. On the bullwhip and inventory variance produced by an ordering policy. Omega 31 (3) , pp. 157-167. 10.1016/S0305-0483(03)00028-8

Disney, Stephen Michael and Towill, Denis Royston 2003. The effect of vendor managed inventory (VMI) dynamics on the Bullwhip Effect in supply chains. International Journal of Production Economics 85 (2) , pp. 199-215. 10.1016/S0925-5273(03)00110-5
file

Disney, Stephen Michael and Towill, Denis Royston 2005. Eliminating drift in inventory and order based production control systems. International Journal of Production Economics 93-94 , pp. 331-344. 10.1016/j.ijpe.2004.06.031
file

Disney, Stephen Michael and Towill, Denis Royston 2006. A methodology for benchmarking replenishment-induced bullwhip. Supply Chain Management: An International Journal 11 (2) , pp. 160-168. 10.1108/13598540610652555
file

Disney, Stephen Michael and Towill, Denis Royston 2006. Controlling replenishment rule induced bullwhip via good systems design. In: Torres, Octavio A. Carranza and Moran, Felipe A. Villegas eds. The Bullwhip Effect in Supply Chains: A Review of Methods, Components and Practical Cases, Palgrave Macmillan,
file

Disney, Stephen Michael, Towill, Denis Royston, Farasyn, I., Lambrecht, Marc and Velde, W. Van de 2005. Smooth is smart: Bullwhip, inventory, fill-rates and the golden ratio. Tijdschrift voor Economie en Management L (2) , pp. 167-187.

Disney, Stephen Michael, Towill, Denis Royston and van de Velde, W. 2004. Variance amplification and the golden ratio in production and inventory control. International Journal of Production Economics 90 (3) , pp. 295-309. 10.1016/j.ijpe.2003.10.009
file

Disney, Stephen Michael, Towill, Denis Royston and Warburton, Roger 2003. On the equivalence of the control theoretic, differential and difference equation approaches to solving the production and inventory control system design problem. Presented at: ICPR 17: 17th International Conference on Production Research, Blacksburg, VA, USA, 3-7 August 2003. Published in: Diesenroth, M. P. ed. ICPR-17: 17th International Conference on Production Research: August 3-7, 2003, Blacksburg, Virginia, USA: electronic proceedings. Blacksburg, Va.: Virginia Tech,

Disney, Stephen Michael, Towill, Denis Royston and Warburton, Roger D. H. 2006. On the equivalence of control theoretic, differential, and difference equation approaches to modeling supply chains. International Journal of Production Economics 101 (1) , pp. 194-208. 10.1016/j.ijpe.2005.05.002

Disney, Stephen Michael and Wang, Xun 2014. Research Briefing: Supply chain chaos. Cardiff University.
file

Disney, Stephen Michael, Warburton, R. and Qing-Chang, Z. 2011. Net present value analysis of the economic production quantity. Presented at: 53rd Conference of the Operational Research Society (OR 53) Keynotes and Short Papers, 6-8 September 2011.

Disney, Stephen Michael and Warburton, R. D. H. 2010. On the Lambert W function: EOQ applications and pedagogical considerations. Presented at: 16th International Working Seminar of Production Economics, Innsbruck, Austria, 1-5 March 2010. Published in: Grubbstrom, R. W. and Hinterhuber, H. H. eds. Proceedings of the 16th International Working Seminar of Production Economics, Innsbruck, Austria 1-5 March 2010. Innsbruck, Austria: Medifas, pp. 129-140.
file

Disney, Stephen Michael, Warburton, R. D. H. and Zhong, Q. C. 2013. Net present value analysis of the economic production quantity. IMA Journal of Management Mathematics 24 (4) , pp. 423-435. 10.1093/imaman/dpt002
file

Disney, Stephen Michael and Warburton, R. W. H. 2010. On the Lambert W function: EOQ applications, pedagogical considerations and EPQ extensions. Presented at: Annual Meeting of the Wales Institute of Mathematical and Computer Sciences (WIMCS), Cardiff, UK, 21 December 2010.

Disney, Stephen Michael and Warburton, Roger D. H. 2012. On the Lambert W function: Economic Order Quantity applications and pedagogical considerations. International Journal of Production Economics 140 (2) , pp. 756-764. 10.1016/j.ijpe.2011.02.027
file

Disney, Stephen Michael, Zhou, LI and Xu, S. J. 2005. Analysis and optimization of inventory variance and bullwhip in a manufacturing/remanufacturing system. Journal of Shanghai Jiaotong University 39 (10) , pp. 1587-1591.
file

Dora, Manoj, Van Goubergen, Dirk, Kumar, Maneesh, Molnar, Adrienn and Gellynck, Xavier 2014. Application of lean practices in small and medium-sized food enterprises. British Food Journal 116 (1) , pp. 125-141. 10.1108/BFJ-05-2012-0107

Dorrington, Peter, Rich, Nicholas Leo, Disney, Stephen Michael and Peat, B. 2006. A new approach to micro-manufacturing road-mapping: Methodology and initial findings. Presented at: 2nd European Conference on Management of Technology (EuroMOT) 2006, Birmingham, UK, 10-12 September 2006. Published in: Bennett, David, Clegg, Ben, Greasley, Andrew and Albores, Pavel eds. Technology and Global Integration: Proceedings of the Second European Conference on Management of Technology, Birmingham, UK, 10-12 September 2006. Birmingham / Coral Gables: Aston Business School / International Association for Management of Technology,

Dotchev, Krassimir, Pham, Duc Truong, Yusoff, W. A. Y. and Soe, Shwe 2008. Investigation on polyamide powder properties deterioration and efficient powder recycling in Laser Sintering. Presented at: 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira, Portugal, 24-29 September 2007. Published in: Bártolo, Paulo ed. Virtual and rapid manufacturing: advanced research in virtual and rapid prototyping. Balkema-Proceedings and Monographs in Engineering, Water, and Earth Sciences London: Taylor & Francis, pp. 545-552.

Dotchev, Krassimir and Soe, Shwe 2006. Rapid manufacturing of patterns for investment casting: improvement of quality and success rate. Rapid Prototyping Journal 12 (3) , pp. 156-164. 10.1108/13552540610670735

Dukyil, Abdulsalam, Mohammed, Ahmed and Darwish, Mohamed 2018. Design and optimization of an RFID-enabled passport tracking system. Journal of Computational Design and Engineering 5 (1) , pp. 94-103. 10.1016/j.jcde.2017.06.002

Dukyil, Abdulsalam, Mohammed, Ahmed and Darwish, Mohamed 2018. A cost-effective decision making algorithm for an RFID-enabled passport tracking system: A fuzzy multi-objective approach. Presented at: IEEE Computing Conference 2017, London, 18-20 July 2017. 2017 Computing Conference. IEEE, pp. 88-95. 10.1109/SAI.2017.8252086

Dunne, P., Soe, Shwe, Byrne, G., Venus, A. D. and Wheatley, A. R. 2004. Some demands on rapid prototypes used as master patterns in rapid tooling for injection moulding. Journal of Materials Processing Technology 150 (3) , pp. 201-207. 10.1016/S0924-0136(03)00571-5

E

Eales, R., Setchi, Rossitza and Bouchard, C. 2007. Semantic-based approach to developing concepts in the automotive industry. Presented at: 3rd I*PROMS Virtual Conference, Cardiff, UK, 2-13 July 2007. Published in: Pham, D. T., Eldukhri, E. E. and Soroka, A. J. eds. Innovative production machines and systems:Third I*PROMS Virtual Conference, 2nd-13th July 2007. Dunbeath: Whittles Publishing, pp. 605-610.

Eaton, Mark Jonathan, Ann, Featherston Carol, Holford, Karen Margaret and Pullin, Rhys 2005. Buckling and postbuckling of impact damaged composite plates. Presented at: SEM Annual Conference, Portland, USA,

Eaton, Mark Jonathan, Holford, Karen Margaret, Featherston, Carol Ann and Pullin, Rhys 2006. Acoustic emission monitoring of delamination defects inbuckling CFRP composite panels. Advanced Materials Research 13-14 , pp. 259-266. 10.4028/www.scientific.net/AMR.13-14.259

Eaton, Mark Jonathan, Holford, Karen Margaret, Featherston, Carol Ann and Pullin, Rhys 2007. Damage in carbon fibre composites: the discrimination of acoustic emission signals using frequency. Journal of Acoustic Emission 25 , pp. 140-148.

Eaton, Mark Jonathan, Holford, Karen Margaret, Featherston, Carol Ann and Pullin, Rhys 2007. An investigation of frequency as an acoustic emission signal discriminator in carbon fibre composite materials. Presented at: 6th International Conference on Acoustic Emission, (ICAE6), Lake Tahoe, Nevada, USA, pp. 312-217.

Eaton, Mark Jonathan, May, M., Featherston, Carol Ann, Holford, Karen Margaret, Hallet, S. and Pullin, Rhys 2011. Characterisation of Damage in Composite Structures using Acoustic Emission. Journal of Physics: Conference Series 305 (1) , 012086. 10.1088/1742-6596/305/1/012086

Eaton, Mark Jonathan, Pullin, Rhys, Featherston, Carol Ann and Holford, Karen Margaret 2011. Acoustic Emission Source Characterisation in Large-Scale Composite Structures. Applied Mechanics and Materials 70 , pp. 381-386. 10.4028/www.scientific.net/AMM.70.381

Eaton, Mark Jonathan, Pullin, Rhys, Hensman, J. J., Holford, Karen Margaret, Worden, K. and Evans, Samuel Lewin 2011. Principal component analysis of acoustic emission signals from landing gear components: an aid to fatigue fracture detection. Strain 47 (Supp.1) , e588-e594. 10.1111/j.1475-1305.2009.00661.x

Eaton, Mark Jonathan, Pullin, Rhys and Holford, Karen Margaret 2012. Acoustic emission source location in composite materials using Delta T Mapping. Composites Part A: Applied Science and Manufacturing 43 (6) , pp. 856-863. 10.1016/j.compositesa.2012.01.023

Eaton, Mark Jonathan, Pullin, Rhys and Holford, Karen Margaret 2012. Towards improved damage location using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226 (9) , pp. 2141-2153. 10.1177/0954406212449582

Eaton, Mark Jonathan, Pullin, Rhys, Holford, Karen Margaret, Evans, Samuel Lewin, Featherston, Carol Ann and Rose, A 2009. Use of Macro Fibre Composite Transducers as Acoustic Emmission Sensors. Remote Sensing 1 (2) , pp. 68-79. 10.3390/rs1020068

Eaton, Mark Jonathan, Pullin, Rhys, Holford, Karen Margaret and Featherston, Carol Ann 2008. AE wave propagation and novel source location in composite plates. Presented at: 28th European Conference on Acoustic Emission, Krakow, Poland,

Edwards, A., Fadzli, S. A. and Setchi, Rossitza 2009. A comparative study of developing physical and digital mood boards. Presented at: 5th International Conference on Innovative Production Machines and Systems (I*PROMS'09), Cardiff, UK,

Edwards, Julia, Wang, Yingli, Potter, Andrew and Cullinane, Sharon 2010. E-business, E-logistics and the environment. In: McKinnon, Alan, Cullinane, Sharon, Browne, Michael and Whiteing, Anthony eds. Green Logistics Improving the Environmental Sustainability of Logistics, London: Kogan Page, pp. 322-338.

Edwards, P. M., Grosvenor, Roger Ivor and Prickett, Paul William 2006. A review of lamp condition monitoring technologies. Lighting Journal 71 (5) , pp. 31-38.

Edwards, P. M., Grosvenor, Roger Ivor and Prickett, Paul William 2008. A Method for Detecting Incorrectly Evacuated Filament Lamps. Lightening Research and Technology 40 (2) , pp. 127-132. 10.1177/1477153507085113

Egbunike, Obiajulu and Potter, Andrew Thomas 2011. Are freight pipelines a pipe dream? A critical review of the UK and European perspective. Journal of Transport Geography 19 (4) , pp. 499-508. 10.1016/j.jtrangeo.2010.05.004

Egbunike, Obiajulu, Potter, Andrew Thomas, Packianather, Michael Sylvester and Found, Pauline 2008. Are capsule pipelines a pipe dream? A critical review. Presented at: Logistics Research Network Annual Conference, Liverpool, UK, 10-12 September 2008.

Elderrat, Haithem, Davies, Huw Charles and Brousseau, Emmanuel Bruno Jean Paul 2014. Investigation of the foam filled fluid technology for anti-vibration devices. Presented at: Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2014, London, England, 1-2 June 2014. Published in: Kumar, Rakesh ed. Proceedings of the International Conference on Proceedings on Advances in Civil, Structural and Mechanical Engineering - CSM 2014. Santa Barbara, CA: Institute of Research Engineers and Doctors, pp. 86-90. 10.15224/ 978-1-63248-012-5-75

Elderrat, Haithem, Davies, Huw Charles and Brousseau, Emmanuel Bruno Jean Paul 2014. Investigation of the foam filled fluid technology for anti-vibration devices. International Journal of Structural Analysis & Design 1 (3) , pp. 182-187.

Elfergani, Hisham A., Pullin, Rhys and Holford, Karen Margaret 2011. Acoustic Emission Analysis of Prestressed Concrete Structures. Journal of Physics: Conference Series 305 (1) , 012076. 10.1088/1742-6596/305/1/012076

Elfergani, Hisham A., Pullin, Rhys and Holford, Karen Margaret 2013. Damage assessment of corrosion in prestressed concrete by acoustic emission. Construction and Building Materials 40 , pp. 925-933. 10.1016/j.conbuildmat.2012.11.071

Elkaseer, Ahmed, Bigot, Samuel, Surleraux, Anthony and Rosochowski, A. 2013. Effect of material microstructure on the micro-EDM process. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013.

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2012. AFM probe-based mechanical machining: Modelling of the surface generation process. Presented at: 7th International Conference on MicroManufacturing (ICOMM2012), Chicago, IL USA, 12-14 March 2012. Proceedings of the 7th International Conference on MicroManufacturing (ICOMM2012. International Conference on MicroManufacturing, pp. 78-84.

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2013. Surface roughness prediction in AFM probe-based machining. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 97-100.

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2014. Modeling the surface generation process during AFM probe-based machining: simulation and experimental validation. Surface Topography: Metrology and Properties 2 (2) , 025001. 10.1088/2051-672X/2/2/025001
file

Ernst, C., Oezel, F., Davies, Huw Charles, Olschewski, I. and Pieper, M. 2012. The development of the e-mobility supply chain in Europe - Results of the European project ENEVATE. Presented at: EEVC, Brussels, Belgium, 19 - 22 November 2012.

Etumi, A. A., Anayi, F. J., Fahmy, Ashraf and Eldukhri, E. E. 2014. Auto-cross correlation coefficients used for detecting an internal fault in three phase transformer. Presented at: IEEE 16th International Conference on Harmonics and Quality of Power (ICHQP), Bucharest, Romania, 25-28 May 2014. Harmonics and Quality of Power (ICHQP), 2014 IEEE 16th International Conference on. IEEE, pp. 370-374. 10.1109/ICHQP.2014.6842784

Etumi, A.A.A., Eldukhri, E.E., Anayi, F.J. and Fahmy, Ashraf 2014. New algorithm based on auto-correlation and cross-correlation scheme to detect the internal fault in single phase transformer. Presented at: 12th IET International Conference on Developments in Power System Protection (DPSP 2014), Copenhagen, Denmark, 31 March - 3 April 2014. Developments in Power System Protection (DPSP 2014), 12th IET International Conference on. IEEE, pp. 1-5. 10.1049/cp.2014.0151

Evans, Barry Kenneth Peter and Mason, Robert John 2011. Exploring how to sustain business process improvement gains in complex operations. Presented at: 16th International Symposium on Logistics (ISL 2011), Berlin, Germany, 10-13 July 2011.

Evans, Barry Kenneth Peter, Mason, Robert John, Zokaei, Keivan and Hines, Peter 2007. Supply chain management: a convenience factory. Presented at: Global Supply Chains: Developing Skills, Capabilities and Networks, Kingston Upon Hull, 5-7 September 2007. Global Supply Chains: Developing Skills, Capabilities and Networks. Proceedings of the Logistics Research Network Annual Conference 2007. The Chartered Institute of Logistics and Transport, pp. 233-239.

Evans, G. N., Naim, Mohamed Mohamed and Towill, Denis Royston 1998. Application of a simulation methodology to the redesign of a logistical control system. International Journal of Production Economics 56-57 , pp. 157-168. 10.1016/S0925-5273(96)00111-9

Evans, Samuel Lewin 2001. Prediction of fatigue crack development in bone cement (invited keynote presentation). Presented at: 5th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Rome, Italy,

Evans, Samuel Lewin 2002. A stochastic model of fatigue damage development in bone cement. Presented at: 4th World Congress of Biomechanics, Calgary, Canada,

Evans, Samuel Lewin 2002. A stochastic model of fatigue damage development in bone cement. Presented at: European Society of Biomaterials, Barcelona, Spain,

Evans, Samuel Lewin 2004. Efficient modelling of inhomogenous materials using unaligned meshing and Gauss point refinement (invited keynote presentation). Presented at: 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain,

Evans, Samuel Lewin 2006. Effects of porosity on the fatigue performance of polymethyl methocrylate bone cement: an analytical investigation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 220 (1) , pp. 1-10. 10.1243/095441105X69024
file

Evans, Samuel Lewin 2007. Fatigue of PMMA bone cement (invited keynote presentation). Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin 2007. What activities are important in the fatigue of bone cement? Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin 2007. Fatigue crack propagation under variable amplitude loading in PMMA and bone cement. Journal of Materials Science: Materials in Medicine 18 (9) , pp. 1711-1717. 10.1007/s10856-007-3021-x

Evans, Samuel Lewin 2010. Effects of intermittent overloads on fatigue of PMMA bone cement. International Journal of Nano and Biomaterials 3 (1) , pp. 65-77. 10.1504/IJNBM.2010.036108

Evans, Samuel Lewin, Ahuja, S. and Hunt, C. M. 2002. Bone cement augmentation of pedicle screws improves pullout strength in posterior spinal fixation. Presented at: European Society of Biomaterials, Barcelona, Spain,

Evans, Samuel Lewin, Ahuja, S. and Hunt, C. M. 2002. Cement of cortoss augmentation of pedicle screws improves pullout strength. Presented at: British Orthopaedic Research Society, Cardiff, UK,

Evans, Samuel Lewin, Ahuja, S. and Hunt, C. M. 2002. Pullout strength of pedicle screws improves with Palacos or Cortoss augmentation. Presented at: 4th World Congress of Biomechanics, Calgary, Canada,

Evans, Samuel Lewin, Featherston, Carol Ann and Griffiths, D. R. 2005. Development of a low cost, durable, mixed waste plastic pallet. CIWM Scientific and Technical Review 6 (1) , pp. 4-13.

Evans, Samuel Lewin, Hunt, C. M. and Ahuja, S. 2002. Bone cement or bone substitute augmentation of pedicle screws improves pullout strength in posterior spinal fixation. Journal of Materials Science: Materials in Medicine 13 (12) , pp. 1143-1145. 10.1023/A:1021133819646

Evans, Samuel Lewin, Thomas, K., Pullen, R. and Holford, Karen Margaret 2003. Problems in the fatigue testing of PMMA bone cements. Presented at: Proceedings of the 2nd International Conference on New Biomedical Materials, Cardiff, UK,

Everitt, Holly, Evans, Samuel Lewin, Holt, Catherine Avril, Bigsby, Rob and Khan, Imran 2010. Acetabular component deformation under rim loading using digital image correlation and finite element methods. Presented at: 7th International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7-9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics VII. Applied Mechanics and Materials. Applied mechanics and materials , vol. 24-25. Stafa-Zurich: Trans Tech Publications, pp. 275-280. 10.4028/www.scientific.net/AMM.24-25.275

Eyers, D. R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. Welding station condition monitoring using bluetooth enabled sensors and intelligent data management. Presented at: Sensors and Their Applications XIII, University of Greenwich at Medway, Kent, UK, 6–8 September 2005. Journal of Physics Conference Series , vol. 15. London: Institute of Physics Publishing, pp. 143-148. 10.1088/1742-6596/15/1/024

Eyers, Daniel Managing risk in additive manufacturing supply chains. Presented at: International Symposium on Logistics, Ljubljana, Slovenia, 9-12 July 2017.

Eyers, Daniel 2015. The flexibility of industrial additive manufacturing systems. PhD Thesis, Cardiff University.
Item availability restricted.
filefile

Eyers, Daniel 2017. Supply chain risk management for sustainable additive manufacturing. Presented at: Sustainable Design and Manufacturing 2017, Bologna, Italy, 24 - 27 April 2017. Published in: Campana, G., Howlett, R. J., Setchi, Rossitza and Cimatti, B. eds. Sustainable Design and Manufacturing 2017. Smart Innovation, Systems and Technologies Cham: Springer, pp. 280-288. 10.1007/978-3-319-57078-5_28

Eyers, Daniel 2018. A jolly good fellow(ship): Reflections on the value of an ESRC Early Career Impact Acceleration Fellowship. Presented at: Logistics and Operations Section Annual Conference, Cardiff, 12 January 2018.

Eyers, Daniel, Potter, Andrew, Gosling, Jonathan and Naim, Mohamed 2018. The flexibility of industrial additive manufacturing systems. International Journal of Operations and Production Management 38 (12) , pp. 2313-2343. 10.1108/IJOPM-04-2016-0200
file

Eyers, Daniel and Potter, Andrew Thomas 2017. Industrial Additive Manufacturing: a manufacturing systems perspective. Computers In Industry 92-93 , pp. 208-218. 10.1016/j.compind.2017.08.002
Item availability restricted.
file

Eyers, Daniel Roy 2012. The additive manufacturing supply chain. Presented at: Understanding Complex Systems, Cardiff, UK, 27 September 2012.

Eyers, Daniel Roy 2015. Control architectures for Industrial Additive Manufacturing Systems. Presented at: Second International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.
file

Eyers, Daniel Roy and Dotchev, Krassimir 2009. Rapid manufacturing for mass customisation. Presented at: Innovative Production Machines and Systems Conference (I*PROMS'09), Cardiff, UK, 2009.

Eyers, Daniel Roy and Dotchev, Krassimir 2010. Technology review for mass customisation using rapid manufacturing. Assembly Automation 30 (1) , pp. 39-46. 10.1108/01445151011016055

Eyers, Daniel Roy and Potter, Andrew Thomas 2015. E-commerce channels for additive manufacturing: an exploratory study. Journal of Manufacturing Technology Management 26 (3) , pp. 390-411. 10.1108/JMTM-08-2013-0102

Eyers, Daniel Roy and Potter, Andrew Thomas 2015. The concept of an industrial additive manufacturing system. Presented at: 26th Annual POMS Conference, Washington, D.C., USA, May 8-11, 2015.

Eyers, Daniel Roy, Potter, Andrew Thomas, Gosling, Jonathan and Naim, Mohamed Mohamed 2012. The flexibility of Additive Manufacturing Systems. Presented at: 4th World Conference on Production and Operations Management (P&OM World Conference), Amsterdam, The Netherlands, 1-4 July 2012.

Eyers, Daniel Roy, Potter, Andrew Thomas, Gosling, Jonathan and Naim, Mohamed Mohamed 2013. Supply Chain Flexibility for Additive Manufacturing. Presented at: 20th EurOMA Conference 2013, Dublin, Ireland, 7-12 June 2013.

Eyers, Daniel Roy, Potter, Andrew Thomas and Wang, Yingli 2011. Supply chain implications of e-commerce channels for additive manufacturing. Presented at: 21st International Conference on Production Research, Stuttgart, Germany, 31 July - 4 August 2011.

Eyers, Daniel Roy, Soe, Shwe and Yusmawiza, Wan 2012. Laser Sintering for the Fabrication of Architectural Models. Presented at: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2012), Kuala Lumpur, Malaysia, 3-5 July 2012.

Eyers, Daniel Roy and Wang, Yingli 2009. The potential of e-commerce distribution channels for products enabled by Rapid Manufacturing. Presented at: Logistics Research Network Annual Conference, Cardiff, UK, 9-11 September 2009.

Eyers, Daniel Roy, Wong, H. and Dotchev, Krassimir 2008. Moving Towards Custom Manufacturing. Presented at: Operational Research Society Annual Conference, 2008.

Eyers, Daniel Roy, Wong, H., Wang, Yingli and Dotchev, K. 2008. Rapid manufacturing enabled mass customisation: untapped research opportunities in supply chain management. Presented at: Logistics Research Network Annual Conference, Liverpool, UK, 10-12 September 2008.

Eyers, Daniel Roy, Wong, H., Wang, Yingli and Dotchev, Krassimir 2008. Rapid manufactured enabled mass customisation: untapped research opportunities in supply chain management. Presented at: Logistics Research Network Annual Conference, Liverpool, UK, 10-12 September 2008.

Eyers, Daniel Roy and Wong, H. W. 2010. Addressing tradeoffs in mass customisation using additive manufacturing technologies. Presented at: 17th International EurOMA Conference, Porto, Portugal, 6-9 June 2010.

Eyers, Daniel Roy, Wong, Hartanto and Soe, Shwe 2009. Re-articulating the role of process design to support mass customisation: The case of rapid manufactured custom-made fixtures. Presented at: 16th International EurOMA Conference, Gothenburg, Sweden, 14-17 June 2009.
file

Eyers Roy, Daniel, Dotchev, K. D. and Popov, I. 2009. Rapid manufacturing and reverse engineering: Key issues for mass customisation. Presented at: International Conference on General Machine Design, 2009.

F

Fahmy, Ashraf and Abdel Ghany, A. M. 2013. Neuro-fuzzy inverse model control structure of robotic manipulators utilized for physiotherapy applications. Ain Shams Engineering Journal 4 (4) , pp. 805-829. 10.1016/j.asej.2013.02.010

Fahmy, Ashraf and Abdel Ghany, A. M. 2015. Adaptive functional-based neuro-fuzzy PID incremental controller structure. Neural Computing and Applications 26 (6) , pp. 1423-1438. 10.1007/s00521-014-1807-6

Fahmy, Ashraf and Abdel Ghany, Abdel Ghany Mohamed 2014. Adaptive functional-based neuro-fuzzy-PID incremental controller structure. Indonesian Journal of Electrical Engineering and Informatics (IJEEI) 2 (1) , Fahmy. 10.11591/ijeei.v2i1.99

Fahmy, Ashraf, Kalyoncu, M. and Castellani, M. 2012. Automatic design of control systems for robot manipulators using the bees algorithm. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 226 (4) , pp. 497-508. 10.1177/0959651811425312

Featherston, Carol, Holford, Karen Margaret, Pullin, Rhys, Lees, Jonathan, Eaton, Mark Jonathan and Pearson, Matthew R. 2013. An autonomous structural health monitoring solution. Presented at: Microtechnologies 2013, Grenoble, France, 24-26 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. Society of Photo-Optical Instrumentation Engineers (SPIE), p. 876302. 10.1117/12.2018401

Featherston, Carol Ann, Eaton, Mark Jonathan, Evans, Samuel Lewin, Holford, Karen Margaret, Pullin, Rhys and Cole, Matthew 2010. Development of a Methodology to Assess Mechanical Impulse Effects Resulting from Lightning Attachment to Lightweight Aircraft Structures. Applied Mechanics and Materials 24-25 , pp. 129-134. 10.4028/www.scientific.net/AMM.24-25.129

Featherston, Carol Ann, Eaton, Mark. Jonathan., Pullin, Rhys and Holford, Karen Margaret 2009. Structural health monitoring of buckling composite structures using acoustic emission. Presented at: International Conference on Computational and Experimental Engineering Sciences, Phuket, Thailand,

Ferran, N. A., Manoj-Thomas, A., Shrama, A., Evans, Samuel Lewin and Thomas, D. P. 2009. Factors affecting pull-out strength of cannulated cancellous bone screws. Presented at: 10th European Federation of National Associations of Orthodpedics and Traumatology (EFORT)Congress, Vienna, Austria,

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul 2007. Critical analysis of an existing calibration procedure built in a white light interferometer microscope and proposal of an alternative spline-based approach. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. 4m 2007 : third International Conference on Multi-material Micro Manufacture : 3rd-5th October 2007, Borovets, Bulgaria. Dunbeath: Whittles, pp. 169-172.

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul 2008. Variability in Measurements of Micro Lengths with a White Light Interferometer. Quality and Reliability Engineering International 24 (8) , pp. 881-890. 10.1002/qre.903

Ferri, C., Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Mattsson, L. 2006. Repeatability analysis of two methods for height measurements in the micrometer range. Presented at: 4M2006: Second International Conference on Multi-Material Micro Manufacture, Grenoble, France, 22-26 September 2006. Published in: Dimov, S., Menz, W. and Fillon, B. eds. 4M 2006 - Second International Conference on Multi-Material Micro Manufacture (Grenoble, France, 22-26 September 2006). Elsevier, pp. 165-168.

Ferri, C., Faraway, J. and Brousseau, Emmanuel Bruno Jean Paul 2010. Calibration of a white light interferometer for the measurement of micro-scale dimensions. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 125-135. 10.1007/s00170-009-2050-7

Found, Pauline, Beale, J., Hines, P., Naim, Mohamed Mohamed, Rich, Nicholas Leo, Sarmiento, R. and Thomas, A. 2006. A theoretical framework for economic sustainability of manufacturing. Presented at: 13th International Annual EurOMA Conference, Glasgow, UK, 18-21 June 2006. Published in: Mendibil, Kepa and Shamsuddin, Alina eds. Moving up the Value Chain: Proceedings of 13th International Annual EurOMA Conference, Glasgow, UK, 18-21 June 2006. Glasgow: University of Strathclyde Publishing, pp. 681-691.

Frankiowak, M. R., Grosvenor, Roger Ivor, Prickett, Paul William and Jennings, D. 2003. Distributed monitoring system using pic microcontroller technologies. Presented at: ICOM 2003 International conference on Mechatronics, Loughborough, UK, 2003. Published in: Parkin, R. M., Al-Habaibeh, A. and Jackson, M. R. eds. ICOM 2003 - International Conference on Mechatronics Proceedings ICOM (Loughborough, UK). Wiley, pp. 415-420.

Frankowiak, M. R., Grosvenor, Roger Ivor, Jennings, A. D., Prickett, Paul William and Turner, J. R. 2001. Technology advances and the current state of Petri net-based condition monitoring. Presented at: Sensors and Their Applications XI, London, UK, September 2001. Published in: Grattan, K. T. V. and Khan, S. H. eds. Sensors and Their Applications XI. Series in Sensors London, UK: Taylor and Francis, pp. 39-44.

Frankowiak, M. R., Grosvenor, Roger Ivor and Prickett, Paul William 2009. Microcontroller-Based process Monitoring using Petri-Nets. EURASIP Journal on Embedded Systems 2009 , 282708. 10.1155/2009/282708
file

Frankowiak, M. R., Grosvenor, Roger Ivor, Prickett, Paul William and Jennings, A. D. 2002. A microcontroller based distributed monitoring system using a petri-net approach. Presented at: 15th International Congress on Condition Monitoring & Diagnostic Engineering Management (Conadem International), Birmingham, UK, 2-4 September 2002. Published in: Rao, R. K. N. and Nandi, A. K. eds. Condition monitoring and diagnostic engineering management : COMADEM : proceedings of the 15th international congress, 2nd-4th September 2002, Birmingham, UK. Comadem, pp. 37-44.

Frankowiak, M. R., Grosvenor, Roger Ivor, Prickett, Paul William, Jennings, A. D. and Turner, J. R. 2001. Design of a PIC based data acquisition system for process and condition monitoring. Presented at: 14th International Congress Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), Manchester, UK, 4-6 September 2001. Published in: Starr, A. G. and Rao, B.K.N. eds. Condition monitoring and diagnostic engineering management (COMADEM 2001) : proceedings of the 14th international congress, 4-6 September 2001, Manchester, UK. Elsevier Science, pp. 481-488.

Frankowiak, Marcos R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. A review of the evolution of microcontroller-based machine and process monitoring. International Journal of Machine Tools and Manufacture 45 (4-5) , pp. 573-582. 10.1016/j.ijmachtools.2004.08.018

Frankowiak, Marcos R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. A Petri-net based distributed monitoring system using PIC microcontrollers. Microprocessors and Microsystems 29 (5) , pp. 189-196. 10.1016/j.micpro.2004.08.003

G

Gaalman, G. and Disney, Stephen Michael 2004. State space investigation of bullwhip with arbitrary demand processes. Presented at: 13th International Working Seminar on Production Economics, Igls, Austria, 16–20 February 2004.
file

Gaalman, G. and Disney, Stephen Michael 2006. On the bullwhip effect of Order-Up-To policies for ARMA(2,2) demand and arbitrary lead-times. Presented at: 14th International Working Seminar on Production Economics, Innsbruck, Austria, 20-26 February 2006.

Gaalman, G. and Disney, Stephen Michael 2007. The evolution of ARMA demand in supply chains: A state space approach. Presented at: 49th Annual Conference of the Operational Research Society, Edinburgh, UK, 4-6 September 2007.

Gaalman, G. and Disney, Stephen Michael 2008. Production smoothing policies: the case of ARMA demand. Presented at: 15th International Annual EurOMA Conference, 15-18 June 2008.

Gaalman, G. G. and Disney, Stephen Michael 2008. Production smoothing policies and the bullwhip effect. Presented at: 15th International Working Seminar on Production Economics, Innsbruck, Austria, 3-7 March 2008.

Gaalman, G. G. and Disney, Stephen Michael 2009. A new inventory policy for a two echelon supply chain. Presented at: 16th EurOMA Annual Conference, Goterborg, Sweden, 14-17 June 2009.

Gaalman, G. G. and Disney, Stephen Michael 2010. The base stock policy: comparison with the order-up-to policy for ARMA(p,q) demand. Presented at: 16th International Working Seminar of Production Economics, Innsbruck, Austria, 1-5 March 2010. Proceedings of the 16th International Working Seminar of Production Economics, Innsbruck, Austria 1-5 March 2010. Innsbruck, Austria: Medifas, pp. 175-176.

Gaalman, G. G. and Disney, Stephen Michael 2010. Revisiting Magee’s production smoothing policy. Presented at: 17th International Annual EurOMA Conference, Porto, Portugal, 6-9 June 2010.

Gaalman, Gerard and Disney, Stephen Michael 2005. Investigation of an order-up-to policy with conditional expectation forecasting and arbitrary lead-times. Presented at: 12th International Annual EurOMA Conference, Budapest, Hungary, 19-22 June 2005.

Gaalman, Gerard and Disney, Stephen Michael 2006. Optimal linear inventory replenishment policies in a two-stage supply chain with arbitrary lead-times. Presented at: CORS/INFORMS 2006 International Meeting, Hong Kong, China, 25-28 June 2006.

Gaalman, Gerard and Disney, Stephen Michael 2006. State space investigation of the bullwhip problem with ARMA(1,1) demand processes. International Journal of Production Economics 104 (2) , pp. 327-339. 10.1016/j.ijpe.2006.05.001

Gaalman, Gerard and Disney, Stephen Michael 2007. On the echelon-order-up-to policy: A stochastic optimal control approach. Presented at: Manufacturing and Service Operations Management Conference, Beijing, China, 18-19 June 2007.

Gaalman, Gerard and Disney, Stephen Michael 2009. On bullwhip in a family of order-up-to policies with ARMA(2,2) demand and arbitrary lead-times. International Journal of Production Economics 121 (2) , pp. 454-463. 10.1016/j.ijpe.2006.11.024
file

Gaalman, Gerard and Disney, Stephen Michael 2012. Bullwhip behaviour in the order-up to policy with ARIMA demand. Presented at: 4th World Production and Operations Management Conference, Amsterdam, The Netherlands, 1-5 July 2012.
file

Galan, R., Racero, J., Eguia, I. and Setchi, Rossitza 2005. Product grouping in reconfigurable manufacturing systems. Presented at: 15th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM05), Bilbao, Spain, 18-20 July 2005. Published in: Sullivan, W. G., Ahmad, M. M., Ashayeri, J. and Álvarez, E. eds. Flexible automation and intelligent manufacturing 2005 :15th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM05) (Bilbao, Spain). University of Duesto Press, pp. 833-841.

Galan, R., Setchi, Rossitza, Eguia, I., Racero, J. and Lagos, N 2005. Product families selection in reconfigurable manufacturing systems. Presented at: CIRP 3rd International Conference on Reconfigurable Manufacturing,

Gallear, David, Ghobadian, Abby, Li, Yanhong, O'Regan, Nicholas, Childerhouse, Paul and Naim, Mohamed Mohamed 2014. An environmental uncertainty-based diagnostic reference tool for evaluating the performance of supply chain value streams. Production Planning & Control 25 (13-14) , pp. 1182-1197. 10.1080/09537287.2013.808838
file

Gardner, Bernard, Naim, Mohamed Mohamed, Obando-Rojas, Bernardo and Pettit, Stephen John 2001. Maintaining the maritime skills base: does the Government have a realistic strategy? Maritime Policy & Management 28 (4) , pp. 347-360. 10.1080/03088830010005653

Gavillet, Jerome, Getin, Stephane, Quesnel, Etienne, Martin, Steve, Delapierre, Guillame, Hiller, Karla, Nestler, Jeorg, Gessner, Thomas, Soechtig, Juergen, Voirin, Guy, Buergi, Lukas, Auerswald, Janko, Knapp, Helmut F., Ross, Stanley, Bigot, Samuel, Ehrat, Marcus, Lieb, Andreas, Beckers, Marie-Claire and Dresse, Damien 2008. Nanostructured polymer thin films: application to biosensors. Presented at: Nanomat 2006, Rio de Janeiro, Brazil, 5-8 June 2006. Published in: Dos Santos, Dilson S. ed. Metastable and Nanostructured Materials III. Materials Science Forum pp. 10-18.

Geary, S., Disney, Stephen Michael and Towill, Denis Royston 2006. On bullwhip in supply chains - historical review, present practice and expected future impact. International Journal of Production Economics 101 (1) , pp. 2-18. 10.1016/j.ijpe.2005.05.009
file

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel and Sun, Yanwen 2017. AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory. Journal of Materials Processing Technology 248 , pp. 236-248. 10.1016/j.jmatprotec.2017.05.028
file

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel Bruno Jean Paul, Yu, Bowen, Qu, Shengnan, Hu, Zhenjiang and Zhao, Xuesen 2016. Processing outcomes of the AFM probe-based machining approach with different feed directions. Precision Engineering 46 , pp. 288-300. 10.1016/j.precisioneng.2016.05.009
file

Gijo, E. V., Antony, Jiju, Kumar, Maneesh, McAdam, Rodney and Hernandez, Jose 2014. An application of Six Sigma methodology for improving the first pass yield of a grinding process. Journal of Manufacturing Technology Management 25 (1) , pp. 125-135. 10.1108/JMTM-12-2011-0109

Goh, Yee Mey, Giess, Matt, McMahon, Chris and Liu, Ying 2009. From faceted classification to knowledge discovery of semi-structured text records. In: Abraham, A., Hassanien, A. E., Carvalho, A. P. and Snášel, V. eds. Foundations of Computational Intelligence, Vol. 6. Studies in Computational Intelligence, vol. 206. Berlin: Springer, pp. 151-169. (10.1007/978-3-642-01091-0_7)

Goltsos, Thanos E., Ponte, Borja, Wang, Shixuan, Liu, Ying, Naim, Mohamed M. and Syntetos, Aris A. 2018. The boomerang returns? Accounting for the impact of uncertainties on the dynamics of remanufacturing systems. International Journal of Production Research 10.1080/00207543.2018.1510191
file

Gonzalez Castro, G., Babenko, M., Bigot, Samuel, Sweeney, J., Ugail, H. and Whiteside, B. R. 2011. Thermal contact resistance in micromoulding. Presented at: Polymer Process Engineering '11, Bradford, UK, 6-7 December 2011.

Gosling, Jonathan 2011. Flexibility strategies for engineer-to-order construction supply chains. PhD Thesis, Cardiff University.
file

Gosling, Jonathan, Fowler, Nicholas and Moone, Brian 2009. Bend, don't break. Supply Chain Quarterly , n/a.

Gosling, Jonathan and Hewlett, B. 2011. A framework for categorising engineer-to-order construction projects. Presented at: Association of Researchers in Construction Management (ARCOM), University of West of England, Bristol, UK, 2011.

Gosling, Jonathan, Hewlett, B. and Naim, Mohamed Mohamed 2011. A framework for categorising engineer-to-order construction projects. Presented at: 27th Annual Association of Researchers in Construction Management (ARCOM) Conference, Bristol, UK, 5-7 September 2011.

Gosling, Jonathan, Iosif, L. and Naim, Mohamed Mohamed 2008. A multidimensional approach to supply chain flexibility in the construction sector. Presented at: 13th International Sympsoium on Logistics, Bangkok, Thailand, 6-8 July 2008. Published in: Pawar, K. S., Lalwani, C. S. and Banomyong, R. eds. Integrating the global supply chain: Proceedings of the 13th International Symposium on Logistics (ISL 2008), Bangkok, Thailand, 6-8 July 2008. Nottingham: Centre for Concurrent Enterprise, Nottingham University Business School, pp. 660-667.

Gosling, Jonathan and Naim, Mohamed Mohamed 2009. Sources of project uncertainty in engineer-to-order supply chains. Presented at: 16th International Annual EurOMA Conference, Göteborg, Sweden, 14-17 June 2009.

Gosling, Jonathan and Naim, Mohamed Mohamed 2009. Coping with project uncertainty in construction supply chains. In: Dainty, A. ed. Proceedings of the 25th Annual ARCOM Conference, Association of Researchers in Construction Management, pp. 813-822.

Gosling, Jonathan and Naim, Mohamed Mohamed 2009. Coping with project uncertainty in construction supply chains. Presented at: Association of Researchers in Construction Management (ARCOM) Annual Conference, Nottingham, UK, 7-9 September 2009. Procs 25th Annual ARCOM Conference. ARCOM, pp. 813-822.

Gosling, Jonathan and Naim, Mohamed Mohamed 2009. Engineer-to-order supply chain management: a literature review and research agenda. International Journal of Production Economics 122 (2) , pp. 741-754. 10.1016/j.ijpe.2009.07.002

Gosling, Jonathan and Naim, Mohamed Mohamed 2010. A framework for developing flexibility in engineer-to-order supply chains. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010. Published in: Pawar, K. S. and Lalwani, C. S. eds. 15th International Symposium on Logistics (ISL 2010): Configuring Next Generation Supply Chains. Nottingham: Nottingham University Business School, pp. 505-512.

Gosling, Jonathan and Naim, Mohamed Mohamed 2010. A framework for developing flexibility in engineer-to-order supply chains. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010.

Gosling, Jonathan, Naim, Mohamed Mohamed, Fearne, Andrew and Fowler, Nicholas 2008. Defining the lean and agile characteristics of engineer-to-order construction projects. Presented at: CME 25 Conference: Construction Management and Economics, Reading, UK, 16-18 July 2007. Published in: Hughes, Will ed. Proceedings of CME 25 Conference Construction Management and Economics: "Past, Present and Future", 16th-18th July 2007, University of Reading, UK. n/a, pp. 773-786.

Gosling, Jonathan, Naim, Mohamed Mohamed, Fowler, M. and Fearne, A. 2007. Manufacturer's preparedness for agile construction. Presented at: IET International Conference on Agile Manufacturing (ICAM 2007), Durham, UK., 9-11 July 2007. The Institution of Engineering and Technology International Conference on Agile Manufacturing: Icam 2007: 9-11 July 2007, Collingwood College, Durham. London: Institution of Engineering & Technology (IET), pp. 103-110.

Gosling, Jonathan, Naim, Mohamed Mohamed, Fowler, N. and Fearne, A. 2007. Manufacturer's Preparedness for Agile Construction. International Journal of Agile Manufacturing 10 (2) , pp. 103-110.

Gosling, Jonathan, Naim, Mohamed Mohamed, Sassi, P., Purvis, Laura and Lark, R. 2008. Flexible buildings for an adaptable and sustainable future. Presented at: Association of Researchers in Construction Management (ARCOM) Annual Conference, Cardiff, UK, 1-3 September 2008.

Gosling, Jonathan, Naim, Mohamed Mohamed and Towill, Denis Royston 2013. Identifying and categorizing the sources of uncertainty in construction supply chains. Journal of Construction Engineering and Management 139 (1) , pp. 102-110. 10.1061/(ASCE)CO.1943-7862.0000574

Gosling, Jonathan, Naim, Mohamed Mohamed and Towill, Denis Royston 2013. A supply chain flexibility framework for engineer-to-order systems. Production Planning & Control: The Management of Operations 24 (7) , pp. 552-566. 10.1080/09537287.2012.659843

Gosling, Jonathan, Naim, Mohamed Mohamed, Towill, Denis Royston, Abouarghoub, Wessam and Moone, Brian 2015. Supplier development initiatives and their impact on the consistency of project performance. Construction Management and Economics 33 (5/6) , pp. 390-403. 10.1080/01446193.2015.1028956
file

Gosling, Jonathan, Naim, Mohamed Mohamed, Towill, Denis Royston and Moone, B. 2011. The impact of experience on total cycle time reduction in supply chains. Presented at: 18th International Annual EurOMA Conference: Exploring Interfaces, Cambridge, UK, 3-6 July 2011.

Gosling, Jonathan, Naim, Mohamed Mohamed, Towill, Denis Royston and Moone, B. 2011. The impact of experience on total cycle time reduction in supply chains. Presented at: European Operations Management Association (Euroma), Cambridge, UK, 3-6 July 2011.

Gosling, Jonathan, Purvis, Laura and Naim, Mohamed Mohamed 2008. A multidimensional approach to supply chain flexibility in the construction sector. Presented at: 13th International Symposium on Logistics (ISL 2008), Bangkok, Thailand, 6-8 July 2008.

Gosling, Jonathan, Purvis, Laura and Naim, Mohamed Mohamed 2010. Supply chain flexibility as a determinant of supplier selection. International Journal of Production Economics 128 (1) , pp. 11-21. 10.1016/j.ijpe.2009.08.029

Gosling, Jonathan, Sassi, Paola, Naim, Mohamed Mohamed and Lark, Robert John 2013. Adaptable buildings: a systems approach. Sustainable Cities and Society 7 , pp. 44-51. 10.1016/j.scs.2012.11.002

Gosling, Jonathan, Towill, Denis Royston, Naim, Mohamed Mohamed and Dainty, Andrew R. J. 2015. Principles for the design and operation of engineer-to-order supply chains in the construction sector. Production Planning & Control: The Management of Operations 26 (3) , pp. 203-218. 10.1080/09537287.2014.880816
file

Griffiths, C. A., Bigot, Samuel, Brousseau, Emmanuel Bruno Jean Paul, Worgull, M., Heckele, M., Nestler, J. and J., Auerswald 2007. Polymer insert tooling for prototyping of micro fluidic components in micro injection moulding. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. Proceedingsof the 3rd International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 305-308.

Griffiths, C. A., Dimov, Stefan Simeonov and Brousseau, Emmanuel Bruno Jean Paul 2008. Micro injection moulding: an experimental study on the relationship between the filling of micro parts and runner designs. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 217-220.

Griffiths, C. A., Dimov, Stefan Simeonov and Brousseau, Emmanuel Bruno Jean Paul 2008. Micro injection moulding: the influence of runner systems on flow behaviour and melt fill of multiple microcavities. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1119-1130. 10.1243/09544054JEM1084

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Chouquet, C., Gavillet, J. and Bigot, Samuel 2008. Micro-injection moulding: surface treatment effects on part demoulding. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 245-248.

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Hoyle, R. T. 2007. The effects of tool surface quality in micro injection moulding. Journal of Materials Processing Technology 189 (1-3) , pp. 418-427. 10.1016/j.jmatprotec.2007.02.022

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Packianather, Michael Sylvester 2008. Micro injection moulding: simulation of melt flow behaviour. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 267-270.

Griffiths, Christian Andrew, Bigot, Samuel, Brousseau, Emmanuel Bruno Jean Paul, Worgull, M., Heckele, M., Nestler, J. and Auerswald, J. 2010. Investigation of polymer inserts as prototyping tooling for micro injection moulding. The International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 111-123. 10.1007/s00170-009-2038-3

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Chouquet, C., Gavillet, J. and Bigot, Samuel 2010. Investigation of surface treatment effects in micro-injection-moulding. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 99-110. 10.1007/s00170-009-2000-4

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Packianather, Michael Sylvester 2008. The finite element analysis of melt flow behaviour in micro-injection moulding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1107-1118. 10.1243/09544054JEM965

Grosvenor, Roger Ivor and Prickett, Paul William 2003. Intelligent process monitoring and management – time for a return to sensor-based methods. Presented at: Sensors and Their Applications XII, Limerick, Ireland, 2-4 September 2003. 12th Conference on Sensors and their Applications, Limerick , Ireland. IOP Publishing, pp. 497-502.

Grosvenor, Roger Ivor and Prickett, Paul William 2011. A discussion of the prognostics and health management aspects of embedded condition monitoring systems. Presented at: Annual Conference of the Prognostics and Health Management Society, Montreal, Canada, 25-29 September 2011. Published in: Celaya, J. R., Saha, S. and Saxena, A. eds. Proceedings Annual Conference of the Prognostics and Health Management Society 2011, Montreal, Canada. PHM Society, pp. 502-509.

Grosvenor, Roger Ivor and Prickett, Paul William 2014. Fast and robust milling cutter tool breakage detection within a distributed microcontroller-based condition monitoring system. Presented at: The 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Brisbane, Australia, 16-18 September 2014. Proceedings of Condition Monitoring and Diagnostic Engineering Management. pp. 1-8.

Grosvenor, Roger Ivor and Prickett, Paul William 2014. The monitoring and validation of scale model tidal steam turbines. Presented at: The 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Brisbane, Australia, 16-18 September 2014. Proceedings of Condition Monitoring and Diagnostic Engineering Management. pp. 1-8.

Grosvenor, Roger Ivor, Prickett, Paul William, Frost, Carwyn and Allmark, Matthew James 2014. Performance and condition monitoring of tidal stream turbines. Presented at: Second European Conference of the Prognostics and Health Management Society 2014, Nantes, France, 8-10 July 2014. Published in: Bregon, Anibal and Daigle, Matthew J. eds. European Conference of Prognostics and Health Management Society 2014. PHM Society, pp. 543-551.
file

Grosvenor, Roger Ivor, Prickett, Paul William, Jennings, A. D. and Frankowiak, M. R 2002. Intelligent process monitoring and management. Presented at: The IEE Seminar on Control Loop Performance Assessment, London, UK, pp. 1-5.

Groves, R. B., Evans, Samuel Lewin, Coulman, S. and BircHall, Jeremy Peter 2009. Mechanics of skin penetration by microneedles. Presented at: Third International Conference on Mechanics of Biomaterials and Tissues, Clearwater, USA,

Groves, R. B., Evans, Samuel Lewin, Coulman, S. and BircHall, Jeremy Peter 2010. Mechanics of skin penetration by microneedles. Presented at: Proceedings of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Groves, Rachel Beth, Coulman, Sion, Birchall, James Caradoc and Evans, Samuel Lewin 2012. Quantifying the mechanical properties of human skin to optimise future microneedle device design. Computer Methods in Biomechanics and Biomedical Engineering 15 (1) , pp. 73-82. 10.1080/10255842.2011.596481

Grubbström, R. W., Bogataj, L., Bonney, M., Disney, Stephen Michael and Tang, O. 2004. Inter-linking MRP theory and production and inventory control models. Presented at: 13th International Working Seminar on Production Economics, Igls, Austria, 16–20 February 2004.
file

H

Hadavinia, H., Kawashita, Luiz, Kinloch, A. J., Moore, D. R. and Williams, J. G. 2006. A numerical analysis of the elastic-plastic peel test. Engineering Fracture Mechanics 73 (16) , pp. 2324-2335. 10.1016/j.engfracmech.2006.04.022

Haliday, D. and Setchi, Rossitza 2009. A comparative study of using traditional user-centred and Kansei Engineering approaches to extract users requirements. Presented at: Innovative Production Machines and Systems Conference (I*PROMS'09), Cardiff, UK,

Halldorsson, A., Potter, Andrew Thomas and Bjorklund, M. 2010. Eco-centric design – a new paradigm for supply chains? Presented at: 15th Annual Logistics Research Network Conference, Harrogate, UK, 8-10 September 2010.

Hallett, Stephen, Lander, James, Jones, Mike, Kawashita, Luiz and Wisnom, Michael R. 2011. Testing and modelling of a severely tapered composite specimen. Presented at: 5th International Conference on Composites Testing and Model Identification (CompTest 2011), Lausanne, Switzerland, 14-16 February 2011.

Hammant, J., Disney, Stephen, Childerhouse, P. and Naim, Mohamed Mohamed 1999. Modelling the consequences of a strategic supply chain initiative of an automotive aftermarket operation. International Journal of Physical Distribution & Logistics Management 29 (9) , pp. 535-551. 10.1108/09600039910287501

Hampson, Joe, MacKenzie, Neil and Walker, Helen Lisbeth 2009. Case studies in sustainable and responsible procurement. Presented at: 18th IPSERA Conference Supply Management – Towards an Academic Discipline?, Wiesbaden, Germany, 5 – 8 April 2009. Proceedings of the 18th IPSERA Conference: Supply Management – Towards an Academic Discipline?, Wiesbaden, Germany, 5–8 April 2009. International Purchasing and Supply Education and Research Association (IPSERA), pp. 1112-1123.

Harper, Gavin David J. and Wells, Peter Erskine 2008. The role of elite consumers in alternative technology clusters. Presented at: Oils and Fuels for Sustainable Development AUZO 2008, Gdansk, Poland, 8th - 11th September 2008.

Harper, Gavin David J. and Wells, Peter Erskine 2012. Diverse regional sustainability strategies: template for the future or squandered resources? International Journal of Automotive Technology and Management, 12 (2) , pp. 153-171. 10.1504/IJATM.2012.046860

Harris, Irina and Disney, Stephen Michael 2014. Levelling products mix in a Heijunka board with Dijkstra shortest path algorithm. Presented at: International Working Seminar on Production Economics, Innsbruck, Austria, 26-28 February 2014..
file

Harris, Irina, Mumford, Christine Lesley, Helsby, Dave and Naim, Mohamed Mohamed 2012. Allocation of stores to depots: how the variability of key factors impacts on allocation. Presented at: Logistics Research Network (LRN) Annual Conference - LRN2012, Cranfield University, Bedford, UK, 5-7 September 2012.

Harris, Irina, Mumford, Christine Lesley and Naim, Mohamed Mohamed 2009. The multi-objective uncapacitated facility location problem for green logistics. Presented at: IEEE Congress on Evolutionary Computation, 2009 (CEC '09), Trondheim, Norway, 18-21 May 2009. Proceedings of the IEEE Congress on Evolutionary Computation, 2009 (CEC '09). Los Alamitos, CA: IEEE, pp. 2732-2739. 10.1109/CEC.2009.4983285

Harris, Irina, Mumford, Christine Lesley and Naim, Mohamed Mohamed 2011. An evolutionary bi-objective approach to the capacitated facility location problem with cost and CO2 emissions. Presented at: Genetic and Evolutionary Computation Conference (GECCO) 2011, Dublin, Ireland, 12-16 July 2011. Published in: Krasnogor, N. ed. GECCO '11 Proceedings of the 13th annual conference on Genetic and evolutionary computation. New York, NY: ACM, pp. 697-704. 10.1145/2001576.2001672

Harris, Irina, Mumford, Christine Lesley and Naim, Mohamed Mohamed 2014. A hybrid multi-objective approach to capacitated facility location with flexible store allocation for green logistics modeling. Transportation Research Part E: Logistics and Transportation Review 66 , pp. 1-22. 10.1016/j.tre.2014.01.010
file

Harris, Irina, Naim, Mohamed Mohamed and Mumford, Christine Lesley 2007. A review of infrastructure modelling for Green Logistics. Presented at: Logistics Research Network Annual Conference 2007, Kingston upon Hull, UK, 5-7 September 2007.

Harris, Irina, Naim, Mohamed Mohamed, Palmer, Andrew, Potter, Andrew Thomas and Mumford, Christine Lesley 2008. Assessing the impact of cost optimization based on infrastructure modelling on co2 emissions. Presented at: 15th International Working Seminar on Production Economics, Innsbruck, Austria, 3-7 March 2008.

Harris, Irina, Naim, Mohamed Mohamed, Palmer, Andrew, Potter, Andrew Thomas and Mumford, Christine Lesley 2011. Assessing the impact of cost optimization based on infrastructure modelling on CO2 emissions. International Journal of Production Economics 131 (1) , pp. 313-321. 10.1016/j.ijpe.2010.03.005

Harris, Irina, Naim, Mohamed Mohamed, Sanchez Rodriguez, V. and Mumford, Christine Lesley 2010. Restructuring of logistics systems and supply chains. In: McKinnon, Alan, Cullinane, Sharon, Whiteing, Anthony and Browne, Michael eds. Green Logistics: Improving the Environmental Sustainability of Logistics, London: Kogan Page, pp. 101-123.

Harris, Irina, Sanchez Rodrigues, Vasco Augusto, Naim, Mohamed Mohamed and Mumford, Christine Lesley 2012. Restructuring road freight transport networks within supply chains. In: McKinnon, Alan, Cullinane, Sharon, Browne, Michael and Whiteing, Anthony eds. Green Logistics: Improving the Environmental Sustainability of Logistics, Kogan Page, pp. 103-128.

Hashoosh, Ahmed, Hirshy, Hassan, Brousseau, Emmanuel Bruno Jean Paul and Moosa, Ahmed 2013. Fabrication of aluminium nanowires by differential pressure injection. ISRN Nanomaterials 2013 , 132798. 10.1155/2013/132798

Hayya, Jack C., Kim, Jeon G., Disney, Stephen Michael, Harrison, Terry P. and Chatfield, Dean 2006. Estimation in supply chain inventory management. International Journal of Production Research 44 (7) , pp. 1313-1330. 10.1080/00207540500338039
file

Hedenstierna, Carl Philip and Disney, Stephen Michael 2012. Impact of scheduling frequency and shared capacity on production and inventory costs. Presented at: 17th International Working Seminar of Production Economics, Innsbruck, Austria, 20-24 February 2012.
file

Hensman, J., Pullin, Rhys, Eaton, Mark Jonathan, Worden, K., Holford, Karen Margaret and Evans, Samuel Lewin 2009. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Measurement Science and Technology 20 (4) , 045101. 10.1088/0957-0233/20/4/045101

Hensman, J., Worden, K., Eaton, Mark Jonathan, Pullin, Rhys, Holford, Karen Margaret and Evans, Samuel Lewin 2011. Spatial scanning for anomaly detection in acoustic emission testing of an aerospace structure. Mechanical Systems and Signal Processing 25 (7) , pp. 2462-2474. 10.1016/j.ymssp.2011.02.016

Hensman, JL, Pullin, Rhys, Eaton, Mark Jonathan, Worden, K, Holford, Karen Margaret and Evans, Samuel Lewin 2008. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Applied Mechanics and Materials: Advances in Experimental Mechanics VI 13-14 , pp. 251-260. 10.4028/www.scientific.net/AMM.13-14.251

Hiller, K., Nestler, J., Gessner, T., Gavillet, J., Getin, S., Quesnel, E., Martin, S., Delapierre, G., Soechtig, J., Voirin, G., Buergi, L., Auerswald, J., Knapp, H. F., Stanley, R., Bigot, Samuel, Dimov, S., Ehrat, M., Lieb, A., Beckers, M. C., Dresse, D. and Victor-Pujebet, E. 2007. Integration aspects of a polymer based SPR biosensor with active micro optical and micro fluidic elements. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.

Hines, P., Beale, J., Found, Pauline, Naim, Mohamed Mohamed, Rich, Nicholas Leo, Sarmiento, R. and Thomas, A. 2006. A holistic framework for the economic sustainability of manufacturing. Presented at: 13th International Annual European Operations Management Association (EurOMA) Conference, Glasgow, UK, 18-21 June 2006.

Holford, Karen Margaret, Carter, D. C., Davies, A. W. and Pullin, Rhys 2001. Damage location in steel bridges by acoustic emission. Journal of Intelligent Material Systems and Structures 12 (8) , pp. 567-576. 10.1177/10453890122145311

Holford, Karen Margaret, Featherston, Carol Ann, Pullin, Rhys and Eaton, Mark Jonathan 2004. Acoustic emission monitoring of buckling behaviour in impact-damaged composite plates. Presented at: 26th European Conference on Acoustic Emission Testing, Berlin, Germany, pp. 427-434.

Holford, Karen Margaret, Manson, G., Pullin, Rhys and Worden, K. 2001. Visualisation and dimension reduction of acoustic emission data for damage detection. Journal of Intelligent Material Systems and Structures 12 (8) , pp. 529-536. 10.1177/10453890122145375

Holford, Karen Margaret, Pullin, Rhys and Davies, A. W. 2003. Damage location by acoustic emission techniques. Presented at: 3rd International Conference on Identification in engineering systems, Swansea, UK, April 2002. Published in: Lees, A. W., Prells, U. and Norton, J. P. eds. Identification in engineering systems : proceedings of the third international conference held in Swansea, April 2002. Swansea: University of Swansea, pp. 198-207.

Holford, Karen Margaret, Pullin, Rhys, Evans, Samuel Lewin, Eaton, Mark Jonathan, Hensman, J. and Worden, K. 2009. Acoustic emission for monitoring aircraft structures. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 223 (5) , pp. 525-532. 10.1243/09544100JAERO404
file

Holford, Karen Margaret, Pullin, Rhys and Lark, Robert John 2004. Acoustic emission modelling of concrete hinge joint models. Journal of Acoustic Emission 22 , pp. 166-172.

Holford, Karen Margaret, Pullin, Rhys and M., Baxter 2007. Current practice and applications of acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM 13), Alexandroupolis, Greece,

Holmström, J., Småros, J., Disney, Stephen Michael and Towill, Denis Royston 2003. Collaborative supply chain configurations: The implications for supplier performance in production and inventory control. Presented at: 8th International Symposium on Logistics (ISL 2003), Sevilla, Spain, 6-8 July 2003.

Holt, Catherine Avril, Evans, Samuel Lewin, Dillon, D. and Ahuja, Alka Surajprakash 2005. Three-dimensional measurement of intervertebral kinematics in vitro using optical motion analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of engineering in medicine 219 (6) , pp. 393-399. 10.1243/095441105X34374
file

Holweg, M. and Disney, Stephen Michael 2005. The evolving frontiers of the bullwhip problem. Presented at: EurOMA 12th International Conference on Operations and Global Competitiveness, Budapest, Hungary, 19-22 June 2005. Published in: Demeter, K. ed. Proceedings of the EurOMA International Conference on Operations and Global Competitiveness. Budapest: Diamond Congress, pp. 707-716.

Holweg, Matthias, Disney, Stephen Michael, Hines, Peter Arthur and Naim, Mohamed Mohamed 2005. Towards responsive vehicle supply: a simulation-based investigation into automotive scheduling systems. Journal of Operations Management 23 (5) , pp. 507-530. 10.1016/j.jom.2004.10.009

Holweg, Matthias, Disney, Stephen Michael, Holmström, Jan and Småros, Johanna 2005. Supply chain collaboration: making sense of the strategy continuum. European Management Journal 23 (2) , pp. 170-181. 10.1016/j.emj.2005.02.008

Hong-Minh, S. M., Disney, Stephen Michael and Naim, Mohamed Mohamed 2000. The dynamics of emergency transhipment supply chains. International Journal of Physical Distribution & Logistics Management 30 (9) , pp. 788-816. 10.1108/09600030010351471
file

Hosada, Takamichi S. and Disney, Stephen Michael 2004. The role of an ordering policy as an inventory and cost controller. Presented at: Logistics Research Network Annual Conference, Dublin, Ireland, 8-10 September 2004.

Hosada, Takamichi S. and Disney, Stephen Michael 2006. The proportional order-up-to policy and altruistic behaviour in a three echelon supply chain. Presented at: Annual INFORMS International Conference, Hong Kong, China, 25-28 June 2006.

Hosada, Takamichi S., Naim, Mohamed Mohamed, Disney, Stephen Michael and Potter, Andrew Thomas 2007. Revisiting the benefit of information sharing for everyday low price products. Presented at: Manufacturing and Service Operations Management Conference, Beijing, China, 18-19 June 2007.

Hosoda, T. and Disney, Stephen Michael 2008. How should we cope with the demand process mis-specification issue? a two-level supply chain case. Presented at: 50th Annual Conference of the Operational Research Society (OR 50) 2008, York, UK, 9-11 September 2008.

Hosoda, T. and Disney, Stephen Michael 2008. On market demand misspecification in a two-level supply chain. Presented at: 13th INFORMS MSOM Conference 2008, Maryland, USA, 5-6 June 2008.

Hosoda, T. and Disney, Stephen Michael 2008. On the choice of supply chain strategy for consignment inventory. Presented at: 50th Annual Conference of the Operational Research Society (OR 50) 2008, York, UK, 9-11 September 2008.

Hosoda, T. and Disney, Stephen Michael 2009. Cost impact of demand process misspecification in a retailer-manufacturer supply chain. Presented at: Conference of the Japanese Operations Management and Strategy Association 2009, Tokyo, Japan,

Hosoda, T. and Disney, Stephen Michael 2009. A lagged demand supply chain. Presented at: 15th International Symposium on Inventories 2008, Budapest, Hungary, 22-26 August.

Hosoda, T. and Disney, Stephen Michael 2009. On strategy when demand information is lagged in a supply chain. Presented at: INFORMS MSOM Conference 2009, Cambridge, USA, June 28-30 2009.

Hosoda, T. and Disney, Stephen Michael 2011. Delay in market demand information. Presented at: International Symposium on Operations Management and Strategy, Yokohama, Japan, 18-19 June 2011.

Hosoda, T. and Disney, Stephen Michael 2011. Delay in market demand information. Presented at: International Symposium on Operations Management and Strategy, Yokohama, Japan, 17-19 June 2011.

Hosoda, Takamichi and Disney, Stephen Michael 2004. An analysis of a three echelon supply chain model with minimum mean squared error forecasting. Presented at: Second World POM Conference and the Fifteenth Annual POM Conference, Cancun, Mexico, 30 April - 3 May 2004. Published in: Gupta, Sushil ed. Proceedings of POM 2004: 2nd World Conference 15th Annual POMS Conference, Cancun, Mexico, 29 April- 3 May 2004. European Operations Management Association; Production and Operations Management Society; Japanese Society for Production Management, 002-0069.

Hosoda, Takamichi and Disney, Stephen Michael 2006. The governing dynamics of supply chains: The impact of altruistic behaviour. Automatica 42 (8) , pp. 1301-1309. 10.1016/j.automatica.2006.03.013
file

Hosoda, Takamichi and Disney, Stephen Michael 2006. On variance amplification in a three-echelon supply chain with minimum mean square error forecasting. Omega 34 (4) , pp. 344-358. 10.1016/j.omega.2004.11.005
file

Hosoda, Takamichi and Disney, Stephen Michael 2009. A generalized order-up-to policy and altruistic behavior in a three-level supply chain. In: Dwivedi, Ashish and Butcher, Tim eds. Supply Chain Management and Knowledge Management: Integrating Critical Perspectives in Theory and Practice, Basingstoke: Palgrave Macmillan, pp. 190-216.
file

Hosoda, Takamichi and Disney, Stephen Michael 2009. On a myth in supply chain management. Journal of the Japanese Industrial Management Association , pp. 431-436.

Hosoda, Takamichi and Disney, Stephen Michael 2009. Impact of market demand mis-specification on a two-level supply chain. International Journal of Production Economics 121 (2) , pp. 739-751. 10.1016/j.ijpe.2009.04.024
file

Hosoda, Takamichi and Disney, Stephen Michael 2012. On the replenishment policy when the market demand information is lagged. International Journal of Production Economics 135 (1) , pp. 458-467. 10.1016/j.ijpe.2011.08.022
file

Hosoda, Takamichi and Disney, Stephen Michael 2012. Closed loop supply chains: The impact of advance notice and lead-times. Presented at: 4th World Production and Operations Management Conference, Amsterdam, The Netherlands, 1-5 July 2012.
file

Hosoda, Takamichi and Disney, Stephen Michael 2012. A delayed demand supply chain: Incentives for upstream players. Omega 40 (4) , pp. 478-487. 10.1016/j.omega.2011.09.005
file

Hosoda, Takamichi and Disney, Stephen Michael 2013. The impact of information and lead-times in a closed loop supply chain. Presented at: 26th European Conference on Operational Research, Rome, Italy, 1-4 July 2013.

Hosoda, Takamichi, Disney, Stephen Michael and Gavirneni, Nagesh 2015. Dynamics of closed loop supply chains. Presented at: 5th International Conference on Industrial Engineering and Operations Management, Dudai, United Arab Emirates, 3 –5 March 2015.

Hosoda, Takamichi, Disney, Stephen Michael and Gavirneni, Nagesh 2015. The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains. European Journal of Operational Research 246 (3) , pp. 827-836.
file

Hosoda, Takamichi, Naim, Mohamed Mohamed, Disney, Stephen Michael and Potter, Andrew Thomas 2008. Is there a benefit to sharing market sales information? Linking theory and practice. Computers & Industrial Engineering 54 (2) , pp. 315-326. 10.1016/j.cie.2007.07.014
file

Howard, A., McLauchlan, G., Richards, J. and Evans, Samuel Lewin 2011. Does the diameter of the intramedullary nail really matter? Presented at: 12th EFORT Congress, Copenhagen, Denmark, 1-4 June 2011.

Hu, Qing, Williams, Sharon Jayne, Found, Pauline and Mason, Robert John 2012. Learning and continuous improvement: Is there a link? Presented at: British Academy of Management Conference, Cardiff, Wales, 11-13 September 2012.

Hu, Qing, Williams, Sharon Jayne, Mason, Robert John and Found, Pauline 2011. Lean implementation within SMEs: A literature review. Presented at: EurOMA, Cambridge, UK, 1st-6th July 2011.

Hu, Qing, Williams, Sharon Jayne, Mason, Robert John and Found, Pauline 2013. The role of consultants in organisational learning. Presented at: Production and Operations Society Annual Conference, Denver, CO, USA, 3-6 May 2013.

Huckridge, J., Potter, Andrew Thomas, Wang, Yingli, Beresford, Anthony Kenneth Charles and Naim, Mohamed Mohamed 2010. Enabling multimodal transport: a Welsh perspective. Presented at: 15th Annual Logistics Research Network Conference, Harrogate, UK, 8-10 September 2010. Proceedings of the 15th Logistics Research Network Conference Harrogate 8-10 September 2010. CILT, pp. 285-294.

Huckridge, J., Potter, Andrew Thomas, Wang, Yingli, Beresford, Anthony Kenneth Charles and Naim, Mohamed Mohamed 2010. Enabling multimodal transport: A Welsh perspective. Presented at: Logistics Research Network Annual Conference 2010, Harrogate, UK, 8-10 September 2010.

Huckridge, J., Potter, Andrew Thomas, Wang, Yingli, Beresford, Anthony Kenneth Charles and Naim, Mohamed Mohammed 2010. CT in multimodal transport operations: a framework for future research. Presented at: 17th EurOMA Conference, Porto, Portugal, 6-9 June 2010.

Huckridge, J., Wang, Yingli, Potter, Andrew Thomas, Beresford, Anthony Kenneth Charles and Naim, Mohamed Mohamed 2010. ICT in multimodal transport operations: a framework for future research. Presented at: 17th International Annual EurOMA Conference, Porto, Portugal, 6-9 June 2010. Published in: Acur, Nuran, Erkip, Nesim K. and Günes, Evrim Didem eds. Proceedings of the 17th International Annual EurOMA Conference, Porto, Portugal, 6-9 June 2010. European Operations Management Association (EurOMA),

Hunt, C. M., Evans, Samuel Lewin, Holt, Catherine Avril, Jones, L., Ahuja, S., Dillon, D., Davies, P and Howes, J. 2002. The use of 3D analysis techniques to measure the effect of pedicle screw systems with cross-links on spine stability. Presented at: 5th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Rome, Italy, 31 October to 3 November 2001. Published in: Middleton, J., Shrive, N. and Jones, M. L. eds. Computer methods in biomechanics and biomedical engineering - 4. Cardiff: University of Wales College of Medicine, pp. 5-30.

Hunt, C. M., Holt, Catherine Avril, Jones, L., Evans, Samuel Lewin, Ahuja, S., Dillon, D., Davies, P. and Howes, J. A. 2002. A method for studying 3D movement of the spine in vitro. Presented at: 4th World Congress of Biomechanics, Calgary, Canada,

Hurth, V. and Wells, Peter Erskine 2008. Averting catastrophic climate change: confronting wealth. International Journal of Innovation and Sustainable Development 2 (1) , pp. 63-78. 10.1504/IJISD.2007.016058

I

III, Archie Lockamy, Childerhouse, Paul, Disney, Stephen Michael, Towill, Denis Royston and McCormack, Kevin 2008. The impact of process maturity and uncertainty on supply chain performance: an empirical study. International Journal of Manufacturing Technology and Management 15 (1) , pp. 12-27. 10.1504/IJMTM.2008.018237

Islam, Nazrul and Brousseau, Emmanuel Bruno Jean Paul 2014. Implementing a multi-staged methodology to micro and nanotechnology: technology maturity assessment and framework. International Journal of Productivity and Performance Management 63 (2) , pp. 170-193. 10.1108/IJPPM-01-2013-0010

J

James, Mark, Grosvenor, Roger Ivor and Prickett, Paul William 2004. e-Distribution: internet-based management of a merchandiser supply chain. Supply Chain Management: An International Journal 9 (1) , pp. 7-15. 10.1108/13598540410517539

Jenner, S. and Wells, Peter Erskine 1990. Local buyer-supplier relations in military production: the case of Westland at Yeovil. Area 22 (2) , pp. 117-123.

Jennings, A. D., Kennedy, V. R., Prickett, Paul William, Turner, J. R. and Grosvenor, Roger Ivor 2001. A distributed data processing system for process and condition monitoring. Presented at: 14th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM), Manchester, pp. 375-381.

Jennings, A. D., Prickett, Paul William, Grosvenor, Roger Ivor and Frankowiak, M. R 2002. Process and condition monitoring using the Internet (e-monitoring). Presented at: 15th International Congress on Condition Monitoring & Diagnostic Engineering Management (Conadem International), Birmingham, UK, pp. 45-52.

Jermin, Daniel, Harris, Irina and Potter, Andrew Thomas 2012. Logistics network design for the operation and maintenance of UK wind farms. Presented at: Logistics Research Network (LRN) Annual Conference and PhD Workshop- LRN2012, Bedford, UK, 5-7 September 2012.

Ji, Ze, Qiu, Renxi, Noyvirt, Alexandre Emilov, Soroka, Anthony John, Packianather, Michael Sylvester, Setchi, Rossitza, Li, D. and Xu, S. 2012. Towards automated task planning for service robots using semantic knowledge representation. Presented at: 2012 10th IEEE International Conference on Industrial Informatics (INDIN), Beijing, China, 25-27 July 2012. INDIN2012: IEEE 10th International Conference on Industrial Informatics. Los Alamitos, CA: IEEE, pp. 1194-1201. 10.1109/INDIN.2012.6301131

John, Elwyn, Kuznecov, Anton, Thomas, Andrew and Davies, Alan 2011. A weighted similarity coefficient technique for manufacturing facility design. International Journal of Productivity and Performance Management 60 (7) , pp. 746-757. 10.1108/17410401111167816

John, Elwyn Graham, Davies, Alan, Hammond, J., Thomas, A. J. and Kuznecov, A. 2009. A conceptual framework for deciding upon the need for re-configurability in manufacturing systems. Presented at: 7th International Conference on Manufacturing Research (ICMR09), Warwick, UK, pp. 265-270.

John, Elwyn Graham, Davies, Alan and Thomas, A. J. 2009. A note on modified Hamiltonian chain: a graph theoretic approach to group technology after Mukhopadhyay et al. International Journal of Production Research 47 (1) , pp. 289-298.

John, Elwyn Graham, Davies, Alan and Thomas, A. J. 2009. A structured guide to cost effective product packaging. Presented at: The 7th International Conference on Manufacturing Research (ICMR09), Warwick, UK, pp. 260-264.

John, Elwyn Graham, Davies, Alan, Thomas, A. J. and Worrall, B. 2007. Strategy identification via numerical situation analysis. Presented at: 37th conference on Computers and Industrial Engineering (CIE37), Alexandria, Egypt, pp. 676-670.

Johnson Lim, Soon Chong, Liu, Ying and Lee, Wing Bun 2010. Multi-facet product information search and retrieval using semantically annotated product family ontology. Information Processing & Management 46 (4) , pp. 479-493. 10.1016/j.ipm.2009.09.001

Jones, Michael David, Cory, C. and Theobald, Peter 2011. Validation of the MADYMO facet human body model to simulate blunt ballistic impacts to the thorax. Presented at: International Society of Biomechanics Congress XXIII, Brussels, Belgium, 3-7 July 2011.

K

Kainuma, Y. and Disney, Stephen Michael 2013. Stochastic design of a global closed loop supply chain: Planning and managing the reverse network at Fuji Xerox. Presented at: 22nd International Conference on Production Research (ICPR22), Iguassu Falls, Brazil, 28 July - 1 August 2013.
file

Kainuma, Yasutaka and Disney, Stephen Michael 2015. The cascade reuse supply chain at Fuji Xerox: A stochastic analysis. Presented at: 26th Production and Operations Management Society Annual Conference, Washington, WA, 8-11 May 2015.
file

Kamil, Haider, Eldukhri, Eldaw Elzaki and Packianather, Michael Sylvester 2012. Optimisation of swing-up control parameters for a robot gymnast using the Bees Algorithm. Presented at: 8th International Symposium on Intelligent and Manufacturing Systems (IMS2012), Antalya, Turkey, 27 - 28 September 2012. Proceedings of 8th International Symposium on Intelligent and Manufacturing Systems (IMS 2012). Amtalya: Sakarya University Department of Industrial Engineering, pp. 456-466.

Kawashita, Luiz, Bedos, A. and Hallet, S. R. 2011. Modelling mesh independent transverse cracks in laminated composites with a simplified cohesive segment method. Presented at: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, Germany, 21-23 September 2011.

Kawashita, Luiz, Bedos, Alexandre and Hallett, Stephen R. 2012. Modelling Mesh Independent Transverse Cracks in Laminated Composites with a Simplified Cohesive Segment Method. CMC: Computers, Materials & Continua 32 (2) , pp. 133-158. 10.3970/cmc.2012.032.133

Kawashita, Luiz and Hallett, Stephen R. 2012. A crack tip tracking algorithm for cohesive interface element analysis of fatigue delamination propagation in composite materials. International Journal of Solids and Structures 49 (21) , pp. 2898-2913. 10.1016/j.ijsolstr.2012.03.034

Kawashita, Luiz, Harper, P. W., Jones, M. I., Hallett, S. R. and Wisnom, M. R. 2009. Cohesive zone implementation for modelling delamination from discontinuous plies - static and fatigue considerations. Presented at: 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London, UK, 1-3 April 2009.

Kawashita, Luiz, Jones, M. I., Hallett, S. R., Wisnom, M. R. and Giannis, S. 2011. High fidelity modelling of tapered laminates with internal ply terminations. Presented at: 18th International Conference on Composite Materials (ICCM18), Jeju, Korea, 21-26 August 2011.

Kawashita, Luiz, Kinloch, A. J., Moore, D. R. and Williams, J. G. 2006. A critical investigation of the use of a mandrel peel method for the determination of adhesive fracture toughness of metal-polymer laminates. Engineering Fracture Mechanics 73 (16) , pp. 2304-2323. 10.1016/j.engfracmech.2006.04.025

Kawashita, Luiz, Kinloch, A. J., Moore, D. R. and Williams, J. G. 2008. The influence of bond line thickness and peel arm thickness on adhesive fracture toughness of rubber toughened epoxy-aluminium alloy laminates. International Journal of Adhesion and Adhesives 28 (4-5) , pp. 199-210. 10.1016/j.ijadhadh.2007.05.005

Kawashita, Luiz, Moore, D. R. and Williams, J. G. 2004. The development of a mandrel peel test for the measurement of adhesive fracture toughness of epoxy-metal laminates. The Journal of Adhesion 80 (3) , pp. 147-167. 10.1080/00218460490279215

Kawashita, Luiz, Moore, D. R. and Williams, J. G. 2005. Analysis of peel arm curvature for the determination of fracture toughness in metal-polymer laminates. Journal of Materials Science 40 (17) , pp. 4541-4548. 10.1007/s10853-005-0856-8

Kawashita, Luiz, Moore, D. R. and Williams, J. G. 2005. Comparison of Peel Tests for Metal-Polymer Laminates for Aerospace Applications. The Journal of Adhesion 81 (6) , pp. 561-586. 10.1080/00218460590954557

Kawashita, Luiz, Moore, D. R. and Williams, J. G. 2006. Protocols for the Measurement of Adhesive Fracture Toughness by Peel Tests. The Journal of Adhesion 82 (10) , pp. 973-995. 10.1080/00218460600876142

Kawashita, Luiz F., Bedos, Alexandre and Hallett, Stephen R. 2012. Mesh-independent modelling of transverse cracks in laminated composites under quasi-static and impact loading. Presented at: 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, 8-13 July 2012.

Kawashita, Luiz F., Pernice, M. Francesca and Hallett, Stephen R. 2013. Mesh-independent cohesive crack model for the analysis of in-plane compression and shear failure in laminated composites. Presented at: IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, Azores, Portugal, 25 - 27 September 2013.

Kempshall, P., Jemmett, P., Evans, Samuel Lewin, Davies, P., Jones, D. A., Howes, J. and Ahuja, S. 2009. Accuracy of Jerome halo pin self-limiting torque screw drivers. Presented at: British Association of Spine Surgeons & British Cervical. Spine Society (combined annual meeting), Sheffield, UK,

Kettle, J., Rees, A., Brousseau, Emmanuel Bruno John Paul and Horie, M. 2013. Low-temperature thermal nanoimprint lithography of anti-reflective structures for flexible low band gap organic solar cells. Journal of Physics D: Applied Physics 46 (10) , 105102. 10.1088/0022-3727/46/10/105102

Khurana, A., Byrne, Carlton Barrie Baylis, Evans, Samuel Lewin, Tanaka, H. and Haraharan, K. 2010. Comparison of transverse wires and half pins in Taylor Spatial Frame: A biomechanical study. Journal of Orthopaedic Surgery and Research 5 (1) , 23. 10.1186/1749-799X-5-23

Krohs, F., Luttermann, T., Stolle, C., Fatikow, S., Brousseau, Emmanuel Bruno Jean Paul and Dimov, Stefan Simeonov 2008. Towards automation in AFM based nanomanipulation and electron beam induced deposition for microstructuring. Presented at: International Conference on Multi-Material Micro Manufacture, Cardiff, UK, 9-11 September 2008. Published in: Menz, Wolfgang and Dimov, Stefan Simeonov eds. 4M 2008: Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, Wales. Dunbeath: Whittles, pp. 118-123.

Kumar, Maneesh 2007. Critical success factors and hurdles to Six Sigma implementation: the case of a UK manufacturing SME. International Journal of Six Sigma and Competitive Advantage 3 (4) , pp. 333-351. 10.1504/IJSSCA.2007.017176

Kumar, Maneesh and Antony, J. 2009. Multiple case-study analysis of quality management practices within UK Six Sigma and non-Six Sigma manufacturing small- and medium-sized enterprises. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223 (7) , pp. 925-934. 10.1243/09544054JEM1288

Kumar, Maneesh, Antony, J., Singh, R. K., Tiwari, M. K. and Perry, D. 2006. Implementing the Lean Sigma framework in an Indian SME: a case study. Production Planning & Control 17 (4) , pp. 407-423. 10.1080/09537280500483350

Kumar, Maneesh and Antony, Jiju 2008. Comparing the quality management practices in UK SMEs. Industrial Management & Data Systems 108 (9) , pp. 1153-1166. 10.1108/02635570810914865

Kumar, Maneesh, Antony, Jiju, Antony, Frenie Jiju and Madu, Christian N. 2007. Winning customer loyalty in an automotive company through Six Sigma: a case study. Quality and Reliability Engineering International 23 (7) , pp. 849-866. 10.1002/qre.840

Kumar, Maneesh, Antony, Jiju and Cho, Byung Rae 2009. Project selection and its impact on the successful deployment of Six Sigma. Business Process Management Journal 15 (5) , pp. 669-686. 10.1108/14637150910987900

Kumar, Maneesh, Antony, Jiju and Douglas, Alex 2009. Does size matter for Six Sigma implementation?: Findings from the survey in UK SMEs. The TQM Journal 21 (6) , pp. 623-635. 10.1108/17542730910995882

Kumar, Maneesh, Antony, Jiju, Madu, Christian N., Montgomery, Douglas C. and Park, Sung H. 2008. Common myths of Six Sigma demystified. International Journal of Quality & Reliability Management 25 (8) , pp. 878-895. 10.1108/02656710810898658

Kumar, Maneesh, Antony, Jiju and Tiwari, M. K. 2011. Six Sigma implementation framework for SMEs - a roadmap to manage and sustain the change. International Journal of Production Research 49 (18) , pp. 5449-5467. 10.1080/00207543.2011.563836

Kumar, S., Choudhary, A. K., Kumar, Maneesh, Shankar, R. and Tiwari, M. K. 2006. Kernel distance-based robust support vector methods and its application in developing a robust K-chart. International Journal of Production Research 44 (1) , pp. 77-96. 10.1080/00207540500216037

Kural, Aleksander, Pullin, Rhys, Featherston, Carol Ann, Paget, C. and Holford, Karen Margaret 2011. Wireless power transmission using ultrasonic guided waves. Journal of Physics. Conference Series 302 (1) , 012088. 10.1088/1742-6596/305/1/012088

Kural, Aleksander, Pullin, Rhys, Holford, Karen Margaret, Lees, Jonathan, Naylon, Alexander Jack, Paget, Christophe and Featherston, Carol Ann 2013. Design and characterization of an ultrasonic lamb-wave power delivery system. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 60 (6) , pp. 1134-1140. 10.1109/TUFFC.2013.2676

Kwak, Dong-Wook, Beresford, Anthony Kenneth Charles, Pettit, Stephen John, Mason, Robert John and Sanchez Rodrigues, Vasco Augusto 2012. Risks in International Multimodal Logistics: Focus Group Research. Presented at: 2012 International Association of Maritime Economists Conference (IAME 2012 Taipei), Taipei, Taiwan, 6-8 September 2012.

L

Lagos, N. and Setchi, Rossitza 2006. Product support knowledge. Presented at: I*PROMS'06 Innovative Production Machines and Systems, Cardiff, UK, 3-14 July 2006. Proceddings of the I*PROMS'06 , 3-14 July 2006, Cardiff, UK. Whittles, pp. 101-106.

Lagos, N. and Setchi, Rossitza 2007. A manufacturing ontology for e-learning. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, 2-13 July 2007. Proceedings of the I*PROMS*07, 2-13 July 2007, Cardiff, UK. Whittles, pp. 552-557.

Lagos, N. and Setchi, Rossitza 2008. PROGNOSIS: an adaptive system for virtual technical documentation. In: Pazos-Arias, J., Kloos, C. D. and Nores, M. L. eds. Personalisation of interactive multimedia services: a research and development perspective, New York: Nova Science Publishers, pp. 141-156.

Lagos, N., Setchi, Rossitza and Dimov, Stefan Simeonov 2005. Towards the integration of performance support and e-learning: context-aware product support systems. Lecture Notes in Computer Science 3762 , pp. 1149-1158. 10.1007/11575863_138

Lagoudis, I., Lalwani, C. and Naim, Mohamed Mohamed 2001. Generic system model for ports in the logistics chain. Presented at: International Conference on Port and Maritime R&D and Technology (ICPMRDT), Singapore, 29th-31st October 2001. Proceedings of the Inaugural International Conference on Port and Maritime R&D and Technology.

Lagoudis, I., Naim, Mohamed Mohamed and Potter, Andrew Thomas 2007. Strategic choice as a determinant of transport flexibility in the ocean transportation industry. Presented at: 1st International Scientific Conference: Competitiveness and Complementarity of Transport Modes, Perspectives for the Development of Intermodal Transport, Chios, Greece, 10-12 May 2007.

Lagoudis, I. N., Lalwani, C. S. and Naim, Mohamed Mohamed 2004. A generic systems model for ocean shipping companies in the bulk sector. Transportation Journal 43 (1) , pp. 56-76.

Lagoudis, I. N., Lalwani, C. S. and Naim, Mohamed Mohamed 2006. Ranking of factors contributing to higher performance in the ocean transportation industry: a multi-attribute utility theory approach. Maritime Policy & Management 33 (4) , pp. 345-369. 10.1080/03088830600895568

Lagoudis, Ioannis N., Lalwani, C. S., Naim, Mohamed Mohamed and King, Jessica 2002. Defining a conceptual model for high-speed vessels. International Journal of Transport Management 1 (2) , pp. 69-78. 10.1016/S1471-4051(01)00007-6

Lagoudis, Ioannis N., Naim, Mohamed Mohamed and Potter, Andrew Thomas 2010. Strategic flexibility choices in the ocean transportation industry. International Journal of Shipping and Transport Logistics 2 (2) , pp. 187-205. 10.1504/IJSTL.2010.030866

Lalwani, C. S., Disney, Stephen Michael and Naim, Mohamed Mohamed 2006. On assessing the sensitivity to uncertainty in distribution network design. International Journal of Physical Distribution & Logistics Management 36 (1) , pp. 5-21. 10.1108/09600030610642904
file

Lalwani, C. S., Pawar, K. S., Naim, Mohamed Mohamed and Shah, J. 2004. Contextualisation of uncertainty reduction practices in Indian manufacturing firms. Presented at: International Conference on Responsive Supply Chain and Organisational Responsiveness, Coimbatore, India, 5-7 January 2004.

Lalwani, Chandra, Disney, Stephen Michael and Towill, Denis Royston 2003. Observable and controllable state space representations of a generalized Order-Up-To policy. Presented at: ICPR 17: 17th International Conference on Production Research, Blacksburg, VA, USA, 3-7 August 2003. Published in: Diesenroth, M. P. ed. ICPR-17: 17th International Conference on Production Research: August 3-7, 2003, Blacksburg, Virginia, USA. Blacksburg, Va.: Virginia Tech, pp. 641-649.

Lalwani, Chandra S., Disney, Stephen Michael and Towill, Denis Royston 2006. Controllable, observable and stable state space representations of a generalized order-up-to policy. International Journal of Production Economics 101 (1) , pp. 172-184. 10.1016/j.ijpe.2005.05.014

Lambrecht, Marc, Dejonckheere, Jeroen, Towill, Denis Royston and Disney, Stephen Michael 2001. Taming the Bullwhip Effect: in search of new replenishment rules in supply chains. Business Inzicht 8 , 1, 4.

Lambrecht, Marc R. and Disney, Stephen Michael 2008. On replenishment rules, forecasting, and the bullwhip effect in supply chains. Foundations and Trends in Technology, Information and Operations Management 2 (1) , pp. 1-80. 10.1561/0200000010
file

Lark, Robert John, Pullin, Rhys and Holford, Karen Margaret 2008. Acoustic emission monitoring of concrete structures. Presented at: Onsite assessment of concrete, masonry and timber structures, International RILEM Conference (SACoMaTiS 2008), Varenna, Italy,

Lengu, D., Syntetos, Argyrios and Babai, M. Z. 2014. Spare parts management: Linking distributional assumptions to demand classification. European Journal of Operational Research 235 (3) , pp. 624-635. 10.1016/j.ejor.2013.12.043
file

Li, Qinyun and Disney, Stephen 2015. On net stock amplification in the Damped Trend Order-Up-To system. Presented at: 6th International Conference on Industrial Engineering and Systems Management, Seville, 21-23 October 2015.
file

Li, Qinyun and Disney, Stephen 2017. Revisiting rescheduling: MRP nervousness and the bullwhip effect. International Journal of Production Research 55 (7) , pp. 1992-2002. 10.1080/00207543.2016.1261196
file

Li, Qinyun and Disney, Stephen Michael 2012. Damped trend forecasting and the order-up-to replenishment policy. Presented at: 17th International Working Seminar of Production Economics, Innsbruck, Austria, 20-24 February 2012.
file

Li, Qinyun and Disney, Stephen Michael 2013. An adaptive damped trend order-up-to replenishment system. Presented at: OR55 Annual Conference of the Society of Operational Research, Exeter, UK, 3-5 September 2013.

Li, Qinyun and Disney, Stephen Michael 2014. Creating an advanced order stream with the proportional order-up-to policy. Presented at: 20th Conference of the International Federation of Operational Research Societies, Barcelona, Spain, 13-18 July 2014.

Li, Qinyun, Disney, Stephen Michael and Gaalman, Gerard 2014. Avoiding the bullwhip effect using Damped Trend forecasting and the Order-Up-To replenishment policy. International Journal of Production Economics 149 , pp. 3-16. 10.1016/j.ijpe.2013.11.010
file

Liang, Yan, Liu, Ying, Kwong, Chun Kit and Lee, Wing Bun 2012. Learning the "Whys": Discovering design rationale using text mining - An algorithm perspective. Computer-Aided Design 44 (10) , pp. 916-930. 10.1016/j.cad.2011.08.002

Lim, Soon Chong Johnson, Liu, Ying and Lee, Wing Bun 2011. A methodology for building a semantically annotated multi-faceted ontology for product family modelling. Advanced Engineering Informatics 25 (2) , pp. 147-161. 10.1016/j.aei.2010.07.005

Lin, Junyi, Naim, Mohamed Mohamed, Purvis, Laura and Gosling, Jonathan 2017. The extension and exploitation of the inventory and order based production control system archetype from 1982 to 2015. International Journal of Production Economics 194 , pp. 135-152. 10.1016/j.ijpe.2016.12.003
file

Lin, Junyi, Spiegler, Virginia L. M. and Naim, Mohamed 2018. Dynamic analysis and design of a semiconductor supply chain: a control engineering approach. International Journal of Production Research 56 (13) , pp. 4585-4611. 10.1080/00207543.2017.1396507
file

Lin, Shang-Min, Potter, Andrew Thomas, Pettit, Stephen John and Nair, Rawindaran Vnp 2014. A systems view of supply network integration in maritime logistics. Presented at: 19th Logistics Research Network Conference, Huddersfield, UK, 3-5 September 2014.
file

Liu, H., Evans, Samuel Lewin, Holt, Catherine Avril, Zhurov, A. and Middleton, J. 2006. Development of an optical motion analysis system to measure small movement in three-dimensional space. Presented at: 4th IASTED International Association of Science and Technology for Development International conference (BIOMED2006), Innsbruck, Austria, 15–17 February 2006. Proceedings. 4th IASTED International Association of Science and Technology for Development International conference (BIOMED2006), Innsbruck, Austria. pp. 186-190.

Liu, H., Zhao, Y., Evans, Samuel Lewin and Holt, Catherine Avril 2009. Applications of motion analysis system measuring micro-movements in three-dimensional space: Resolution accuracy and reliability of the optical motion capture system. Presented at: 3rd International Conference on Bioinformatics and Biomedical Engineering iCBBE 2009, Beijing, China, 11-16 June 2009. 3rd International Conference Bioinformatics and Biomedical Engineering (iCBBE 2009), Beijing, China. , vol. 516240. IEEE, pp. 2815-2818. 10.1109/ICBBE.2009.5162401

Liu, Ying and Harding, Jenny 2009. Editorial for the special issue of knowledge discovery and management in engineering design and manufacturing. Journal of Intelligent Manufacturing 20 (5) , pp. 499-500. 10.1007/s10845-008-0209-y

Liu, Ying, Jin, Jian, Ji, Ping, Harding, Jenny A. and Fung, Richard Y.K. 2013. Identifying helpful online reviews: A product designer's perspective. Computer-Aided Design 45 (2) , pp. 180-194. 10.1016/j.cad.2012.07.008

Liu, Ying, Liang, Yan, Kwong, Chun Kit and Lee, Wing Bun 2010. A new design rationale representation model for rationale mining. Journal of Computing and Information Science in Engineering 10 (3) , 031009. 10.1115/1.3470018

Liu, Ying, Lim, Soon Chong Johnson and Lee, Wing Bun 2013. Product family design through ontology-based faceted component analysis, selection, and optimization. Journal of Mechanical Design 135 (8) , 081007. 10.1115/1.4023632

Liu, Ying, Loh, Han Tong, Toumi, Kamal Youcef and Tor, Shu Beng 2008. A hierarchical text classification system for manufacturing knowledge management and retrieval. International Journal of Knowledge Management Studies 2 (4) , pp. 406-425. 10.1504/IJKMS.2008.019749

Liu, Ying, Lu, Wen Feng and Loh, Han Tong 2006. A framework of information and knowledge management for product design and development - A text mini. Presented at: 12th IFAC Symposium on Information Control Problems in Manufacturing, 2006, Saint Etienne, France, 17-19 May 2006. Published in: Morel, Gerard, Dolgui, Alexandre and Pereira, Carlos eds. 12th IFAC Symposium on Information Control Problems in Manufacturing, 2006. Information Control Problems in Manufacturing , vol. 12. International Federation of Automatic Control, pp. 667-672. 10.3182/20060517-3-FR-2903.00339

Liu, Ying, McMahon, Chris, Ramani, Karthik and Schaefer, Dirk 2011. Editorial for the special issue of information mining and retrieval in design. Advanced Engineering Informatics 25 (2) , pp. 117-118. 10.1016/j.aei.2011.03.003

Liu, Ying, Setchi, Rossitza M., Tseng, Vincent S. and Wang, Feng Chun 2012. Editorial for the special issue of service computing and service oriented enterprise systems in design, manufacturing and supply chain. Journal of Intelligent Manufacturing 23 (4) , pp. 1327-1329. 10.1007/s10845-012-0638-5

Liu, Ying, Zhang, Hui, Li, Chunping and Jiao, Roger Jianxin 2012. Workflow simulation for operational decision support using event graph through process mining. Decision Support Systems 52 (3) , pp. 685-697. 10.1016/j.dss.2011.11.003

Lovern, B, Stroud, L., Feran, N., Evans, Samuel Lewin, Evans, R. and Holt, Catherine Avril 2008. 3D motion analysis of the glenohumeral joint: a comparison of maximal vs. functional range of motion. Presented at: British Elbow and Shoulder Society (BESS2008), Liverpool, UK, 4-6 June, 2008.

Lovern, Barry, Evans, R., Jones, L., Evans, Samuel Lewin, Stroud, L. A. and Holt, Catherine Avril 2008. Functional assessment of the shoulder complex using 3D motion analysis techniques. Presented at: 16th Congress of the European Society of Biomechanics, Lucerne, Switzerland, 6-9 July 2008. Proceedings of the European Society of Biomechanics conference, Lucerne , Switzerland, 6-9 July 2008.

Lovern, Barry, Evans, R., Jones, L., Evans, Samuel Lewin, Stroud, Lindsay Ann and Holt, Catherine Avril 2008. Functional assessment of the shoulder complex using 3D motion analysis techniques [Abstract]. Journal of Biomechanics 41 (S1) , S415. 10.1016/S0021-9290(08)70414-7

Lu, Haiyan, Potter, Andrew Thomas, Sanchez Rodrigues, Vasco Augusto and Walker, Helen 2015. Informal relationships in supply chains: A systematic review of literature. Presented at: 24th IPSERA Conference, Amsterdam, 29 March-1 April 2015.

Lynch, Jane, Beresford, Anthony Kenneth Charles, Mason, Robert John and Found, Pauline 2010. Problems and challenges facing a market orientated supply chain approach. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010. Proceedings of the 15th International Symposium on Logistics (ISL 2010). Nottingham: Nottingham Business School, pp. 67-74.

Lynch, Jane, Found, Pauline, Beresford, Anthony Kenneth Charles and Mason, Robert John 2010. Rethinking strategic orientations to manage contemporary supply chains, as applied to the UK touring caravan industry. Presented at: 21st Annual Conference of the Production and Operations Management Society (POMS 2010), Vancouver, 7-10 May 2010. Proceeding of the 21st Annual Conference of the Production and Operations Management Society POMS Vancouver 7-10 May 2010.
file

Lynch, Jane, Mason, Robert John, Beresford, Anthony Kenneth Charles and Found, Pauline 2009. An exploration of the supply chain design and organisation of the UK caravan manufacturing industry. Presented at: 14th International Symposium on Logistics : Global supply chains and inter-firm networks, Istanbul, Turkey, 5-8 July 2009. Proceedings of the 14th International Symposium on Logistics (ISL 2009) Global supply chains and inter-firm networks Istanbul, Turkey 5-8 July 2009. Nottingham: Nottingham University Business School, pp. 538-546.

Lynch, Jane, Mason, Robert John, Beresford, Anthony Kenneth Charles and Found, Pauline 2012. An examination of the role for Business Orientation in an uncertain business environment. International Journal of Production Economics 137 (1) , pp. 145-156. 10.1016/j.ijpe.2011.11.004

M

MacKerron, Grant, Kumar, Maneesh, Kumar, Vikas and Esain, Ann Elizabeth 2014. Supplier replenishment policy using e-Kanban: A framework for successful implementation. Production Planning & Control: The Management of Operations 25 (2) , pp. 161-175. 10.1080/09537287.2013.782950

Makrymichalos, Miltiadis, Antony, Jiju, Antony, Frenie and Kumar, Maneesh 2005. Statistical thinking and its role for industrial engineers and managers in the 21st century. Managerial Auditing Journal 20 (4) , pp. 354-363. 10.1108/02686900510592043

Maltz, A. and Disney, Stephen Michael 2012. Understanding lead time variability in global supply chains. Presented at: 22 Annual North American Research Symposium on Purchasing and Supply Chain Management, Phoenix/Chandler, AZ, 15-16 March 2012.

Marria, Pankaj, Williams, Sharon Jayne and Naim, Mohamed Mohamed 2014. Six S: creating an efficient and safer work environment. Total Quality Management & Business Excellence 25 (11-12) , pp. 1410-1428. 10.1080/14783363.2012.704281
file

Marsh, A. and Setchi, Rossitza 2008. Design for intuitive use: a study of mobile phones. Presented at: Proceedings of the 4th I*PROMS Virtual International Conference, Cardiff, UK,

Marsh, Jacqueline, Soroka, Anthony John, Davies, Paul, Lynch, Jane and Eyers, Daniel Roy 2014. Challenges to sustainable manufacturing resource planning implementation in SMEs: An exploratory study. Presented at: Sustainable Design and Manufacturing 2014, Cardiff, UK, 28-30 April 2014.
file

Marsh, Richard, Griffiths, Anthony John, Williams, Keith Philip and Evans, Samuel Lewin 2006. Degradation of recycled polyethylene film materials due to contamination encountered in the products' life cycle. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (5) , pp. 593-602. 10.1243/09544062JMES234
file

Marsh, Richard, Griffiths, Anthony John, Williams, Keith Philip and Evans, Samuel Lewin 2006. Thermal degradation of polyethylene film materials due to successive recycling. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (8) , pp. 1099-1108. 10.1243/09544062JMES178
file

Martin, Philip Stephen, Kemp, Alison Mary, Theobald, Peter, Maguire, Sabine Ann and Jones, Michael David 2013. Does a more "physiological" infant manikin design effect chest compression quality and create a potential for thoracic over-compression during simulated infant CPR? Resuscitation 84 (5) , pp. 666-671. 10.1016/j.resuscitation.2012.10.005

Martin, Philip Stephen, Theobald, Peter, Holt, Catherine Avril, Kemp, Alison Mary and Jones, Michael David 2010. Development of a 9 month old model for the computational simulation of traumatic injuries to infants. Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Mason, Robert John, Bateman, Nicola and Wood, Greg 2004. Damaged goods, damaged reputations. ECR Journal 4 (2) , pp. 36-40.

Mason, Robert John, Evans, Barry Kenneth Peter and Zokaei, K. 2009. Developing a new method for measuring cycle time in grocery supply chains. Presented at: Proceedings of 14th Annual Logistics Research Network Conference, Cardiff, UK, 9-11th September 2009. pp. 929-933.

Mason, Robert John, Evans, Barry Kenneth Peter and Zokaei, K. 2009. Developing a new method for measuring cycle time in grocery supply chains. Presented at: Logistics Research Network Annual Conference 2009, Cardiff, UK, 9-11 September 2009.

Mason, Robert John and Lalwani, Chandra 2004. Integrating transportation into the supply chain to improve supply chain performance. Presented at: Logistics Research Network Annual Conference 2004, Dublin, Ireland, 9-10 September 2004.

Mason, Robert John and Lalwani, Chandra 2006. Mass customised distribution. Presented at: 11th International Symposium on Logistics (ISL 2006), Beijing, China, 9-11 July 2006.

Mason, Robert John and Lalwani, Chandra 2006. Transport integration tools for supply chain management. International Journal of Logistics: Research and Applications 9 (1) , pp. 57-74. 10.1080/13675560500534599

Mason, Robert John and Lalwani, Chandra 2007. Fourth party logistics: what, why, how. Presented at: 12th International Symposium on Logistics (ISL 2007), Budapest, Hungary, 8-10 July 2007. Published in: Pawar, Kulwant, Lalwani, Chandra and Muffatto, Moreno eds. Proceedings of the 12th International Symposium on Logistics (ISL 2007). Nottingham: Centre for Concurrent Enterprise, University of Nottingham Business School, pp. 565-572.

Mason, Robert John and Lalwani, Chandra 2008. Mass customised distribution. International Journal of Production Economics 114 (1) , pp. 71-83. 10.1016/j.ijpe.2007.09.013

Mason, Robert John and Lalwani, Chunnilal 2003. Assessing the impact of business to business e-commerce on freight transport. Presented at: 8th Logistics Research Network Conference, London, UK, 10-12 September 2003. Published in: Menachof, David A. ed. Logistics Research Network 2003 Conference Proceedings: Enhancing Global Trade through Supply Chain Solutions, London, UK, 10-12 September 2003. Corby: Institute of Logistics and Transport, pp. 331-338.

Mason, Robert John and Lalwani, Chunnilal 2005. Alternative models for collaboration in transport optimisation management. Presented at: 10th International Symposium on Logistics (ISL 2005), Lisbon, Portugal, 3-5 July 2005.

Mason, Robert John, Lalwani, Chunnilal Sunderdas and Boughton, Roger 2007. Combining Vertical and Horizontal Collaboration for Transport Optimisation. Supply Chain Management: An International Journal 12 (3) , pp. 187-199. 10.1108/13598540710742509

Mason, Robert John, Naim, Mohamed Mohamed, Potter, Andrew Thomas and Wang, Yingli 2008. Transport in Supply Chain Networks. Cardiff: Cardiff Business School.

Mason, Robert John and Nair, Rawindaran Vnp 2010. Strategic flexibility capabilities in the container liner shipping sector. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010.

Mason, Robert John and Nair, Rawindaran Vnp 2013. Strategic flexibility capabilities in the container liner shipping sector. Production Planning & Control 24 (7) , pp. 640-651. 10.1080/09537287.2012.659873

Mason, Robert John, Nieuwenhuis, Paul Andre Henri Francois and Simons, David Wyn 2008. Lean and green supply chain mapping: adapting a lean management tool to the needs of industrial ecology. Journal of Industrial Ecology 5 (4) , pp. 302-324. 10.1504/PIE.2008.021921

Mason, Robert John, Pekkarinen, S., Eyers, Daniel Roy and Juga, J. 2010. Can modularity enhance horizontal coordination of logistics service providers within modular production network? Presented at: 15th Annual Logistics Research Network Conference, Harrogate, UK, 8-10 September 2010.

Mason, Robert John, Potter, Andrew Thomas and Lalwani, Chandra 2002. Trends in ICT and their impact on grocery supply chains. Presented at: 7th International Symposium on Logistics, Melbourne, Australia, 14 - 17 July 2002.

Mason, Robert John, Potter, Andrew Thomas, Naim, Mohamed Mohamed and Aryee, Gilbert 2007. Aligning relationship goals and measures within a logistics triad. Presented at: 12th International Symposium on Logistics (ISL 2007), Budapest, Hungary, 8-10 July 2007. Published in: Pawar, Kulwant, Lalwani, Chandra and Muffatto, Moreno eds. Proceedings of the 12th International Symposium on Logistics (ISL 2007). Nottingham: Centre for Concurrent Enterprise, University of Nottingham Business School, pp. 17-24.

Mason, Robert John and Purvis, Laura 2009. Exploring the challenges surrounding the management of triadic inter-organisational relationships in supply networks. Presented at: Logistics Research Network Annual Conference 2009, Cardiff, UK, 9-11 September 2009.

Mason, Robert John, Simons, David Wyn and Gardner, Bernard M. 2001. Translating the overall equipment effectiveness from the lean manufacturing paradigm to the road freight transport industry. Presented at: Logistics Research Network Annual Conference 2001, Edinburgh, UK, 13-14 September 2001.

Masson, Ron, Purvis, Laura, MacKerron, Grant and Fernie, June 2007. Managing complexity in agile global fashion industry supply chains. International Journal of Logistics Management 18 (2) , pp. 238-254. 10.1108/09574090710816959

Mastrocinque, Ernesto, Yuce, Baris, Lambiase, Alfredo and Packianather, Michael Sylvester 2013. A multi-objective optimisation for supply chain network using the bees algorithm. International Journal of Engineering Business Management 5 , pp. 1-11. 10.5772/56754

Mastrocinque, Ernesto, Yuce, Baris, Lambiase, Alfredo and Packianather, Michael Sylvester 2014. A system of systems approach to supply chain design. Applied Mechanics and Materials 496 , pp. 2807-2814. 10.4028/www.scientific.net/AMM.496-500.2807

Matovic, J., Kettle, J., Brousseau, Emmanuel Bruno Jean Paul and Adamovic, N. 2008. Patterning of nanomembranes with a focused-ion-beam. Presented at: 26th International Conference on Microelectronics( MIEL 2008), Nis, Serbia, pp. 103-106.

Mattis, V. B., Svendsen, S. P., Ebert, A., Svendsen, C. N., King, A. R., Casale, M., Winokur, S. T., Batugedara, G., Vawter, M., Donovan, P. J., Lock, L. F., Thompson, L. M., Atwal, R. S., Zhu, Y., Fossale, E., Gillis, T., Mysore, J., Li, J.-H., Seong, I. S., Shen, Y., Chen, X., Wheeler, V. C., MacDonald, M. E., Gusella, J. F., Akimov, S., Arbez, N., Juopperi, T., Ratovitski, T., Chiang, J. H., Kim, W. R., Chighladze, E., Watkin, E., Zhong, C., Makri, G., Cole, R. N., Margolis, R. L., Song, H., Ming, G., Ross, C. A., Kaye, J. A., Daub, A., Sharma, P., Mason, A. R., Finkbeiner, S., Rushton, David J., Brazier, Stephen Paul, Battersby, Alysia Agnes, Redfern, Amanda Jane, Tseng, Hsiu-Er, Harrison, Alexander William John, Kemp, Paul J., Allen, Nicholas Denby, Castiglioni, V., Onorati, M., Cattaneo, E., Yu, J., Thomson, J. A. and Arjomand, J. 2012. Induced pluripotent stem cells from patients with Huntington's Disease show CAG-repeat-expansion-associated phenotypes. Cell Stem Cell 11 (2) , pp. 264-278. 10.1016/j.stem.2012.04.027

Mattsson, L., Bolt, P. J., Azcarate, S., Brousseau, Emmanuel Bruno Jean Paul, Fillon, B, Fowler, C., Gelink, E., Griffiths, C., Khan, Malek C., Marson, S., Retolaza, S., Schneider, A., Schoth, A., Temun, A., Tiquet, P. and Tosello, G. 2008. Reliability of surface roughness measurements of micro features - experiences of a round robin test with nine 4M laboratories. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, 9-11 September 2008. Published in: Menz, Wolfgang and Dimov, Stefan eds. 4M 2008: Proceedings of the 4th International Conference on Multi-material Micro Manufacture. Whittles,

May, M., Pullin, Rhys, Eaton, Mark Jonathan, Featherston, Carol Ann and Hallet, S. R. 2011. An advanced model for initiation and propagation of damage under fatigue loading - part II: Matrix cracking validation cases. Composite Structures 93 (9) , pp. 2350-2357. 10.1016/j.compstruct.2011.03.023

McAdam, Rodney, Antony, Jiju, Kumar, Maneesh and Hazlett, Shirley A. 2011. Absorbing new knowledge in small and medium-sized enterprises: a multiple case analysis of Six Sigma. International Small Business Journal n/a 10.1177/0266242611406945

McCullen, P. and Disney, Stephen Michael 2008. Dynamic supply network design: integrating inventory and transportation modelling. Presented at: 50th Annual Conference of the Operational Research Society (OR 50) 2008, York, UK, 9-11 September 2008.

McGonagle, L., Jones, Michael David, Dowson, D., King, Pauline and Theobald, Peter 2012. Lubrication properties of commercially available anti-adhesive agents used in tendon repair [Abstract]. Orthopaedic Proceedings: a supplement of Journal of Bone and Joint Surgery (British) 94-B (SXVIII) , p. 60.

McGonagle, Lorcan John, Jones, Michael David, Dowson, Duncan and Theobald, Peter 2012. The bio-tribological properties of anti-adhesive agents commonly used during tendon repair. Journal of Orthopaedic Research 30 (5) , pp. 775-780. 10.1002/jor.21569

Mellin, R. and Setchi, Rossitza 2007. Mass customisation in the automotive industry. Presented at: 5th International Conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria, pp. 240-244.

Mello, Mario Henrique, Gosling, Jonathan, Naim, Mohamed Mohamed, Strandhagen, Jan Ola and Brett, Per Olaf 2016. Improving coordination in an engineer-to-order supply chain using a soft systems approach. Production Planning & Control 28 (2) , pp. 89-107. 10.1080/09537287.2016.1233471
file

Minetola, Paolo and Eyers, Daniel 2017. Additive manufacturing as a driver for the sustainability of short-lifecycle customized products: the case study of mobile case covers. Presented at: Sustainable Design and Manufacturing 2017, Bologna, Italy, 24 - 27 April 2017. Published in: Campana, G., Howlett, R. J., Setchi, Rossitza and Cimatti, B. eds. Sustainable Design and Manufacturing 2017. Smart Innovation, Systems and Technologies Cham: Springer, pp. 280-288. 10.1007/978-3-319-57078-5_28

Minev, Ekaterin, Popov, Krastimir Borisov, Minev, Roussi, Dimov, Stefan Simeonov, Gagov, V. and Packianather, Michael Sylvester 2010. Utilizing a Grid method for Accuracy Study of Micro SLA parts. Presented at: 7th International Conference on Multi-Material Micro Manufacture,, Bourg en Bresse and Oyonnax, France, 17-19 November 2010. Published in: Fillon, B., Khan-Malek, C. and Dimov, Stefan Simeonov eds. Proceedings of the 6th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, pp. 257-260. 10.3850/978-981-08-6555-9_154

Minev, R., Minev, E. and Bigot, Samuel 2012. Capability study of MNT processes using Grid Method. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.

Minev, R., Minev, E. and Bigot, Samuel 2013. How to implement the grid method analyses for capability studies of MNTs. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov, Minev, Ekaterin and Matthews, C. 2010. Methodology for capability maturity assessment of MNT chains. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 249-252.

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov, Scholz, S. and Matthews, C. 2010. Capability maturity study of the horizontal and vertical integration of structuring, patterning and characterisation MNTs. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 253-256.

Mishra, N., Kumar, V., Kumar, N., Kumar, Maneesh and Tiwari, M.K. 2011. Addressing lot sizing and warehousing scheduling problem in manufacturing environment. Expert Systems with Applications 38 (9) , pp. 11751-11762. 10.1016/j.eswa.2011.03.062

Mohammed, Ahmed, Filip, Misha, Setchi, Rossitza and Li, Xiaodong 2017. Drafting a fuzzy TOPSIS-multi-objective approach for a sustainable supplier selection. Presented at: 2017 23rd International Conference on Automation and Computing (ICAC), Huddersfield, 7 - 8 September 2017. -.

Mohammed, Ahmed and Harris, Irina 2018. Gresilient purchasing: A MADM approach. Presented at: International Conference on Applied Analysis and Mathematical Modeling, Gelişim University, Istanbul, 20-24 June 2018.

Mohammed, Ahmed, Wang, Qian and Filip, Misha 2017. Towards a cost-effective design of a meat supply chain: A multi-criteria optimization model. Presented at: 2017 23rd International Conference on Automation and Computing (ICAC), Huddersfield, 7 - 8 September 2017.

Mohammed, Ahmed, Wang, Qian and Li, Xiaodong 2017. A cost-effective decision-making algorithm for an RFID-enabled HMSC network design: a multi-objective approach. Industrial Management and Data Systems 117 (9) , pp. 1782-1799. 10.1108/IMDS-02-2016-0074
file

Mohd Anuar, Fatahiyah, Setchi, Rossitza and Lai, Yukun 2013. Trademark image retrieval using an integrated shape descriptor. Expert Systems with Applications 40 (1) , pp. 105-121. 10.1016/j.eswa.2012.07.031

Mohd Anuar, Fatahiyah, Setchi, Rossitza and Lai, Yukun 2013. A conceptual model of a trademark retrieval system based on conceptual similarities. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: Invited Session Proceedings. pp. 300-309.

Montecchi, Tiziano, Russo, Davide and Liu, Ying 2013. Searching in cooperative patent classification: comparison between keyword and concept-based search. Advanced Engineering Informatics 27 (3) , pp. 335-345. 10.1016/j.aei.2013.02.002

Morris, Ashley, Halpern, Marc, Prickett, Paul William and Setchi, Rossitza M. 2014. Product change management: assessing the challenges to maintaining design integrity throughout the product lifecycle. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. Published in: Setchi, Rossitza M., Howlett, R. J., Naim, Mohamed Mohamed and Seinz, H. eds. KES Transactions on Sustainable Design and Manufacturing. Hove, East Sussex: Future Technology Press, pp. 188-200.

Muhamad Bunnori, N., Pullin, Rhys, Holford, Karen Margaret and Lark, Robert John 2006. A practical investigation into acoustic wave propagation in concrete structures. Advanced Materials Research 13-14 , pp. 205-212. 10.4028/www.scientific.net/AMR.13-14.205

Mukhtar, Nur Farah Hafizah, Brousseau, Emmanuel Bruno Jean Paul and Prickett, Paul William 2014. Study of silicon tip wear during AFM probe-based machining of single crystal copper. Presented at: Ninth International Conference on MicroManufacturing (ICOMM 2014), Nanyang Technological University (NTU) and National University of Singapore (NUS), Singapore, 25-28 March 2014.

Muoneke, H., Holt, Catherine Avril, Evans, Samuel Lewin and O'Callaghan, P. T. O. 2000. Spring loading of elbow crutches does not reduce loads on the upper limb. Presented at: British Orthopaedic Research Society, Leicester, UK,

Mustaffa, N. H. and Disney, Stephen Michael 2005. Approaches to solving the inventory routing problem. Presented at: 12th International EurOMA Conference, Budapest, Hungary, 19-22 June 2005. Published in: Demeter, Krisztina ed. Operations and Global Competitiveness: Papers of the 12th International EurOMA Conference and Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005. Budapest: Diamond Congress, pp. 767-774.

Mustaffa, Noorfa Haszlinna and Disney, Stephen Michael 2006. Stochastic periodic review model of a multi retailer inventory routing problem. Presented at: 14th International Working Seminar on Production Economics, Innsbruck, Austria, 20-26 February 2006.

N

Naim, Mohamed, Eyers, Daniel and Lisec, Andrej 2018. Papers from the 22nd International Symposium of Logistics (ISL). International Journal of Logistics Management, The 29 (4) , pp. 1122-1124. 10.1108/IJLM-11-2018-345

Naim, Mohamed Mohamed 2006. The impact of the net present value on the assessment of the dynamic performance of e-commerce enabled supply chains. International Journal of Production Economics 104 (2) , pp. 382-393. 10.1016/j.ijpe.2004.11.015

Naim, Mohamed Mohamed, Aryee, Gilbert and Potter, Andrew Thomas 2007. A transport provider's capability for mass customisation. Presented at: 12th International Symposium on Logistics (ISL 2007): Developing Sustainable Collaborative Supply Chains, Budapest, Hungary, 8-10th July 2007. Published in: Pawar, K. S. ed. Proceedings of the 12th International Symposium on Logistics, Budapest, 8th-10th July. Nottingham: Nottingham Centre for Concurrent Enterprise, Univ. of Nottingham, pp. 483-490.

Naim, Mohamed Mohamed, Aryee, Gilbert and Potter, Andrew Thomas 2007. A transport provider's flexibility capability for mass customisation. Presented at: 12th International Symposium on Logistics (ISL 2007), Budapest, Hungary, 8-10 July 2007. Published in: Pawar, Kulwant S., Lalwani, Chandra and Muffatto, Moreno eds. Proceedings of the 12th International Symposium on Logistics (ISL 2007). Nottingham: Centre for Concurrent Enterprise, University of Nottingham Business School, pp. 483-490.

Naim, Mohamed Mohamed, Aryee, Gilbert and Potter, Andrew Thomas 2010. Determining a logistics provider's flexibility capability. International Journal of Production Economics 127 (1) , pp. 39-45. 10.1016/j.ijpe.2010.04.011

Naim, Mohamed Mohamed, Barker, R. R. and Hong-Minh, S. M. 2001. Identifying supply chain solutions: those suitable for the UK house building sector. European Journal of Purchasing and Supply Management: Special Issue on Construction Supply Chains 7 (1) , pp. 49-59.

Naim, Mohamed Mohamed and Barlow, James 2003. An innovative supply chain strategy for customized housing. Construction Management and Economics 21 (6) , pp. 593-602. 10.1080/0144619032000134129

Naim, Mohamed Mohamed, Childerhouse, P., Disney, Stephen Michael and Towill, Denis Royston 2002. A supply chain diagnostic methodology: determining the vector of change. Computers & Industrial Engineering 43 (1-2) , pp. 135-157. 10.1016/S0360-8352(02)00072-4

Naim, Mohamed Mohamed, Disney, Stephen Michael and Evans, G. 2002. Minimum Reasonable Inventory and the Bullwhip Effect in an Automotive Enterprise: A "Foresight Vehicle" Demonstrator. Presented at: SAE 2002 World Congress & Exhibition, Detroit, MI, USA, 4 March 2002. SAE Technical Paper. Warrendale, PA: SAE International, pp. 196-203. 10.4271/2002-01-0461
file

Naim, Mohamed Mohamed, Disney, Stephen Michael and Towill, Denis Royston 2002. Minimum reasonable inventory and the bullwhip effect in an automotive enterprise; a 'Foresight Vehicle' demonstrator. Presented at: SAE 2002 World Congress & Exhibition, Detroit, MI, USA, 4 March 2002. 10.4271/2002-01-0461
file

Naim, Mohamed Mohamed, Disney, Stephen Michael and Towill, Denis Royston 2004. Supply chain dynamics. In: New, Steve and Westbrook, Roy eds. Understanding Supply Chains: Concepts, Critiques and Futures, Oxford: Oxford University Press, pp. 109-132.
file

Naim, Mohamed Mohamed and Gosling, Jonathan 2011. On leanness, agility and leagile supply chains. International Journal of Production Economics 131 (1) , pp. 342-354. 10.1016/j.ijpe.2010.04.045

Naim, Mohamed Mohamed, Holweg, M. M. and Towill, Denis Royston 2003. On systems thinking, engineering and dynamics - their influence on modern logistics management. Presented at: 8th International Symposium of Logistics, Seville, Spain, 6-8 July 2003.

Naim, Mohamed Mohamed and Potter, Andrew Thomas 2008. The five principles of integrated tailored logistics. Presented at: SAPICS 30th Annual Conference, Sun City, South Africa, 30 June-2 July 2008. Proceedings of the SAPICS 30th Annual Conference Sun City, South Africa, 30 June-2 July 2008. SAPICS,

Naim, Mohamed Mohamed and Potter, Andrew Thomas 2008. The fundamentals of integrated tailored logistics. Presented at: 13th International Symposium on Logistics (ISL 2008), Bangkok, Thailand, 6-8 July 2008. Published in: Pawar, K. S., Lalwani, C. S. and Banomyong, R. eds. Integrating the global supply chain: Proceedings of the 13th International Symposium on Logistics (ISL 2008), Bangkok, Thailand, 6-8 July 2008. Nottingham: Centre for Concurrent Enterprise, Nottingham University Business School, pp. 284-291.

Naim, Mohamed Mohamed, Potter, Andrew Thomas, Mason, Robert John and Bateman, Nicola 2006. The flexibility of transport operations. Presented at: 13th International Annual EurOMA Conference, Glasgow, UK, 18-21 June 2006.

Naim, Mohamed Mohamed, Potter, Andrew Thomas, Mason, Robert John and Bateman, Nicola Ann 2006. The role of transport flexibility in logistics provision. The International Journal of Logistics Management 17 (3) , pp. 297-311. 10.1108/09574090610717491

Naim, Mohamed Mohamed, Potter, Andrew Thomas, Sanchez Rodrigues, Vasco Augusto and Spiegler, Virginia L. M. 2011. 'Base' and ‘surge’ strategies for controlling environmental and economic costs in logistic triads. Presented at: 16th International Symposium on Logistics (ISL 2011), Berlin, Germany, 10-13 July 2011. pp. 503-511.

Naim, Mohamed Mohamed, Spiegler, Virginia L., Wikner, Joakim and Towill, Denis Royston 2017. Identifying the causes of the bullwhip effect by exploiting control block diagram manipulation with analogical reasoning. European Journal of Operational Research 263 (1) , pp. 240-246. 10.1016/j.ejor.2017.05.014
file

Naim, Mohamed Mohamed and Tang, O 2004. The impact of information transparency on the dynamic behaviour of a hybrid manufacturing/remanufacturing system. International Journal of Production Research 42 (19) , pp. 4135-4152. 10.1080/00207540410001716499

Naim, Mohamed Mohamed and Thornhill, N. F. 2002. Dynamics uncertainty measurement in supply chains. Presented at: Logistics Research Network Annual Conference 2002, Birmingham, UK, 5-6 September 2002. Published in: Ireland, Paul ed. Logistics Research Network 2002 Conference Proceedings, Birmingham, UK, 5-6 September 2002. Institute of Logistics and Transport, pp. 543-549.

Naim, Mohamed Mohamed and Thornhill, N. F. 2005. Detecting disturbances in a supply chain echelon via spectral PCA. Presented at: 18th International Conference on Production Research, Salerno, Italy, 1-4 August 2005.

Naim, Mohamed Mohamed, Towill, Denis and McCullen, P. 2006. Bullwhip reduction paradigms. In: Torres, Octavio A. Carranza and Mor, Felipe A. Villegas eds. The Bullwhip Effect in Supply Chains; A Review of Methods, Components and Cases, Basingstoke: Palgrave Macmillan, pp. 107-122.

Naim, Mohamed Mohamed, Wikner, J. and Grubbstrom, R. W. 2007. A net present value assessment of make-to-order and make-to-stock manufacturing systems. Omega 35 (5) , pp. 524-532. 10.1016/j.omega.2005.09.006

Nair, Rawindaran and Eyers, Daniel 2018. The decision of the Permanent Court of Arbitration on territorial disputes in the South China Sea: Revisiting the “Tragedy of the Commons” through a risk management perspective. Presented at: Logistics and Operations Management Section Annual Conference, Cardiff, 12 January 2018.

Nair, Rawindaran Vnp, Xu, Jane and Mason, Robert John 2012. Delivery schedule reliability in the international container liner shipping service: implications for research. Presented at: The International Forum on Shipping, Ports and Airports - IFSPA 2012, Hong Kong, China, 27-30 May 2012.

Nair, Rawindaran Vnp, Xu, Jane and Mason, Robert John 2012. Delivery schedule integrity in international container liner shipping services. Presented at: International Association of Maritime Economists (IAME) Conference 2012, Taipei, Taiwan, 5-8 September 2012.

Nathadwarawala, K. and Setchi, Rossitza 2006. Mass customisation: a study of a customised bicycle. Presented at: 4th international conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria, pp. 179-182.

Naylor, J. B., Griffiths, J. and Naim, Mohamed Mohamed 2001. Knowledge-based system for estimating steel plant performance. International Journal of Operations & Production Management 21 (7) , pp. 1000-1019. 10.1108/01443570110393469

Naylor, J. Ben, Naim, Mohamed Mohamed and Berry, Danny 1999. Leagility: Integrating the lean and agile manufacturing paradigms in the total supply chain. International Journal of Production Economics 62 (1-2) , pp. 107-118. 10.1016/S0925-5273(98)00223-0

Nestler, J., Hiller, K., Gessner, T., Buergi, L., Soechtig, J., Stanley, R., Voirin, G. and Bigot, Samuel 2006. A new technology platform for fully integrated polymer based micro optical fluidic systems. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture (4M2006), Grenoble, France,

Nestler, J., Hiller, K., Gessner, T., Gavillet, J., Auerswald, J., Knapp, H., Griffiths, C., Bigot, Samuel and Beckers, M. C. 2008. An all-polymer microfluidic system for protein sensing applications with integrated low-cost pumps, surface modification and sealing. Presented at: Smart Systems Integration 2008, Barcelona, Spain, 9-10 April 2008.

Nestler, J., Hiller, K., Morschhauser, A., Bigot, Samuel, Griffiths, C., Auerswald, J., Gavillet, J., Nonglaton, G., Otto, T. and Gessner, T. 2008. low-cost, fully intergrated liquid handling platform for protein assays. Presented at: 12th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2008), San Diego, USA,

Nestler, J., Hiller, K., Otto, T., Gessner, T., Auerswald, J., F., Knapp H., Griffiths, C. and Bigot, Samuel 2008. Microfluidic cartridge for protein assays with integrated pumps. Presented at: 1st European Conference on Microfluidics, Bologna, Italy,

Nestler, J., Morschhauser, A., Hiller, K., Bigot, Samuel, Auerswald, J., Gavillet, J., Otto, T. and Gessner, T. 2007. Electrochemical microfluidic pumps based on super absorbing polymers. Presented at: 11th International Conference on Proceedings - Miniaturized Systems for Chemistry and Life Sciences Paris (uTAS2007), Paris, France, pp. 1504-1506.

Nestler, J., Morschhauser, A., Hiller, K., Otto, T., Bigot, Samuel, Auerswald, J., Knapp, H.F., Gavillet, J. and Gessner, T. 2010. Polymer Lab-on-Chip systems with integrated electrochemical pumps suitable for large scale fabrication. The International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 137-145. 10.1007/s00170-009-1948-4

Nestler, J., Morschhauser, A., Hiller, K., Otto, T., Bigot, Samuel and Gessner, T. 2007. Polymer Lab-on-Chip systems with integrated electrochemical pumps. Presented at: Proceedings of International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria, pp. 319-322.

Nieuwenhuis, Paul Andre Henri, Vergragt, Philip J. and Wells, Peter Erskine 2004. Technological change and regulation in the car industry: Introduction. Greener Management International 47 , pp. 5-11.

Nieuwenhuis, Paul Andre Henri and Wells, Peter Erskine 2009. Diversity, path dependency and the future of hydrogen fuel cell vehicles. Presented at: Hydrogen + Fuel Cells 2009 International Conference (HFC2009), Vancouver, BC, Canada, 31 May - 2 June 2009.

Nieuwenhuis, Paul Andre Henri, Wells, Peter Erskine and Smith, Lucy Canning 2002. The automotive industry: ...the future guide. Centre for Automotive Industry Research/British Telecommunications.

Nieuwenhuis, Paul Andre Henri Francois, Seitz, M. and Wells, Peter Erskine 2003. The EU ELV directive, an opportunity for rethinking auto markets. Presented at: 2nd International Conference of the International Society for Industrial Ecology, Ann Arbor, MI, USA, 30 June - 2 July 2003.

Nieuwenhuis, Paul Andre Henri Francois, Vergragt, Philip and Wells, Peter Erskine 2006. Technological change and regulation in the car industry. Greener Management International 47 , pp. 5-11.

Nieuwenhuis, Paul Andre Henri Francois, Vergragt, Philip and Wells, Peter Erskine 2006. Transitions to sustainable mobility. In: Nieuwenhuis, Paul Andre Henri Francois, Vergragt, Philip and Wells, Peter Erskine eds. The Business of Sustainable Mobility: From Vision to Reality, Sheffield: Greenleaf Publishing, pp. 11-18.

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2003. Did Ford really invent mass production? Comment and Analysis, Cardiff: The Centre For Business Relationships, Accountability, Sustainability and Society.
file

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2003. The automotive industry and the environment: a technical, business and social future. Woodhead Publishing in Environmental Management Series, Cambridge: Woodhead Publishing.

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2006. Business models for relocalisation to deliver sustainability. In: Nieuwenhuis, Paul Andre Henri Francois, Wells, Peter Erskine and Vergragt, Philip eds. The Business of Sustainable Mobility: From Vision to Reality, Greenleaf Publishing, pp. 92-102.

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2008. Ford, Budd and the history of mass production. Presented at: World of the Model T Conference, Dearborn, MI, USA, 1 July 2008. Published in: Endelman, Judith E. ed. The Model T reconsidered: proceedings of the World of the Model T Conference. Dearborn, MI: Henry Ford Museum, pp. 61-68.

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2008. Ford, Budd, and the history of mass production: the Model T reconsidered. Presented at: World of the Model T Conference, Dearborn, MI, USA, 1 July 2008. Published in: Endelman, Judith E. ed. The Model T reconsidered: proceedings of the world of the Model T conference. Dearborn, MI: Henry Ford (Organization), pp. 61-68.

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2008. Ford, Budd and the history of mass production. Presented at: The World of the Model T, Dearborn, Michigan, USA, 17-18 July 2008.

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine 2009. Car futures - rethinking the automotive industry beyond the American model. [Technical Report]. Trend Tracker. Available at: http://www.trendtracker.co.uk/store/2009/11/car-fu...

Nieuwenhuis, Paul Andre Henri Francois, Wells, Peter Erskine and Vergragt, P. H. 2006. Introduction [Editorial]. Greener Management International 47 , pp. 5-11.

Nieuwenhuis, Paul Andre Henri Francois, Wells, Peter Erskine and Vergragt, Philip 2006. The business of sustainable mobility. In: Nieuwenhuis, Paul Andre Henri Francois, Vergragt, Philip and Wells, Peter Erskine eds. The Business of Sustainable Mobility: From Vision to Reality, Sheffield: Greenleaf Publishing, pp. 11-18.

Nieuwenhuis, Paul Andre Henri Francois, Wells, Peter Erskine and Vergragt, Philip J. 2006. Conclusions: where next and when can we buy one? In: Nieuwenhuis, Paul Andre Henri Francois, Vergragt, Philip J. and Wells, Peter Erskine eds. The Business of Sustainable Mobility: From Vision to Reality, Sheffield, UK: Greenleaf Publishing, pp. 223-230.

Nordigården, D., Rehme, J., Walker, Helen Lisbeth and Bregge, S. 2012. Outsourcing strategies – combining outsourcing with in-house production. Presented at: IPSERA Conference, Naples, Italy, 1-4 April 2012.

Nordigarden, Daniel, Rehme, Jakob, Brege, Staffan, Chicksand, Daniel and Walker, Helen Lisbeth 2014. Outsourcing decisions - the case of parallel production. International Journal of Operations and Production Management 34 (8) , pp. 974-1002. 10.1108/IJOPM-06-2012-0230
file

Noyvirt, Alexandre Emilov and Qiu, Renxi 2012. Human detection and tracking in an assistive living service robot through multimodal data fusion. Presented at: 10th IEEE International Conference on Industrial Informatics (INDIN), 2012, Beijing, China, 25-27 July 2012. INDIN 2012: IEEE 10th International Conference on Industrial Informatics. Los Alamitos, CA: IEEE, pp. 1176-1181. 10.1109/INDIN.2012.6301153

Nujoom, Reda, Mohammed, Ahmed and Wang, Qian 2017. Towards a sustainable manufacturing system design:A multi-objective optimization model. Presented at: 2017 23rd International Conference on Automation and Computing (ICAC), Huddersfield, UK, 7 - 8 Sep 2017.

Nujoom, Reda, Mohammed, Ahmed and Wang, Qian 2018. A sustainable manufacturing system design: A fuzzy multi-objective optimization model. Environmental Science and Pollution Research 25 (25) , pp. 24835-24547. 10.1007/s11356-017-9787-6

O

Omar, Fuad, Brousseau, Emmanuel, Elkaseer, Ahmed, Kolew, Alexander, Prokopovich, Polina and Dimov, Stefan 2014. Development and experimental validation of an analytical model to predict the demoulding force in hot embossing. Journal of Micromechanics and Microengineering 24 (5) , 055007. 10.1088/0960-1317/24/5/055007
file

Omar, Fuad, Elkaseer, Ahmed, Brousseau, Emmanuel, Kolew, Alexander and Prokopovich, Polina 2013. Demoulding forces in hot embossing: Model development and validation. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM2013). pp. 642-649.

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul and Hirshy, Hassan 2012. Process factors influence on residual layer uniformity in hot embossing. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012. Published in: Noll, Humbert, Adamovic, Nadja and Dimov, Stefan eds. Multi-Material Micro Manufacture Proceedings of the 9th International Conference on. Singapore: Research Publishing, pp. 81-84. 10.3850/978-981-07-3353-7_302

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul and Hirshy, Hassan 2013. Simulation and experimental study of the effects of process factors on the uniformity of the residual layer thickness in hot embossing. Journal of Micro and Nano-Manufacturing 1 (2) , 021002. 10.1115/1.4024097

Orsato, R. and Wells, Peter Erskine 2007. The automobile industry & sustainability. Journal of Cleaner Production 15 (11-12) , pp. 989-993. 10.1016/j.jclepro.2006.05.035

Orsato, R. and Wells, Peter Erskine 2007. U-turn: the rise and demise of the automobile industry. Journal of Cleaner Production 15 (11-12) , pp. 994-1006. 10.1016/j.jclepro.2006.05.019

Oturk, H., Jones, A. M. H., Evans, Samuel Lewin, B., Nair P. and Browne, M. 2009. Experimental and finite element corroboration of the mechanical behavior of a cementless hip replacement. Presented at: 22nd Annual Conference for the International Society for Technology in Arthroplasty, Hawaii, USA,

Owen, R. J., Porretta, S., Grosvenor, Roger Ivor and Prickett, Paul William 2009. Upgrading the Descaling System in a Hot Rolling Mill - A Practical Method for Quantifying the Descaling Systems Reliability. Presented at: 5th European Rolling Conference, The Institute of Materials, Minerals and Mining, London, UK,

Owen, Robert J., Grosvenor, Roger Ivor, Porretta, S. and Prickett, Paul William 2014. A repairable mechanical system reliability assessment methodology applied in a steelmaking context. Quality and Reliability Engineering International 30 (7) , pp. 1093-1107. 10.1002/qre.1526
file

Ozel, Fatih, Davies, Huw Charles and Wells, Peter Erskine 2015. A policy intervention evaluation framework for electric vehicle technology development. Presented at: 23rd International Colloquium of Gerpisa, Paris, France, 10-12 June 2015.

Oztemel, E., Kubat, C., Uygun, O., Canvar, T., Korkusuz, T., Raja, V. and Soroka, Anthony John 2009. Performance assessment of swarm robots. Lecture Notes in Computer Science 5611 , pp. 361-367. 10.1007/978-3-642-02577-8

Ozturk, H., B., Nair P., T., Bah M., Evans, Samuel Lewin, Jones, A. M. H. and Browne, M. 2010. Computational and experimental assessment of primary stability of a cementless total hip replacement: The effect of the stem positioning. Presented at: Proceedings of the 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

P

Packianather, Michael Sylvester, Dimov, Stefan Simeonov, Griffiths, Christian Andrew and Sha, Baichuan 2007. Investigation of micro-injection moulding: factors affecting the replication quality. Journal of Materials Processing Technology 183 (2-3) , 284 - 296. 10.1016/j.jmatprotec.2006.10.019

Packianather, Michael Sylvester and Drake, P R 2004. Modelling neural network performance through response surface methodology for classifying wood veneer defects. Proceedings of Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (4) , pp. 459-466. 10.1243/095440504323055588

Packianather, Michael Sylvester and Drake, P R 2005. Comparison of neural and minimum distance classifiers in wood veneer defect identification. Proceedings of Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219 (11) , pp. 831-841. 10.1243/095440505X32823

Packianather, Michael Sylvester and Drake, P. R. 2004. A modelling neural network performance through response surface methodology for classifying wood veneer defects. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (4) , pp. 459-466. 10.1243/095440504323055588

Packianather, Michael Sylvester, Pham, Duc Truong, Charles, E. Y. A., Martina, R., Teti, R., D'Addona, D. and Iodice, G. 2010. Spiking neural network with delay-adaption learning model for decision support in treating dental malocclusions. VIMation Journal 2010 (1) , pp. 48-57.

Pandey, S., Naim, Mohamed Mohamed and Potter, Andrew Thomas 2010. The impacts of weather uncertainties on freight transport supply chains. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010.

Pandey, Sunil, Naim, Mohamed Mohamed and Potter, Andrew Thomas 2010. The impacts of weather uncertainties on freight transport supply chains. Presented at: 15th International Symposium on Logistics (ISL 2010), Kuala Lumpar, Malaysia, 4-7 July 2010. Published in: Pawar, K. S. and Lalwani, C. S. eds. Proceedings of the 15th International Symposium on Logistics (ISL 2010), Kuala Lumpur, Malaysia, 4-7 July 2010. Nottingham: Nottingham University Business School, pp. 573-580.

Pasantonopoulos, C., Dimov, Stefan Simeonov, Pham, Duc Truong and Setchi, Rossitza 2009. An object-orientated framework for virtual intelligent product manuals. International Journal of Systems Science 40 (2) , pp. 187-204. 10.1080/00207720802630727

Pasantonopoulos, C., Dimov, Stefan Simeonov and Setchi, Rossitza 2005. An object-orientated framework for intelligent product manuals. Presented at: Innovative Production Machines and Systems Conference (IPROMS 2005), Cardiff, UK, pp. 85-90.

Pearson, Matthew R., Eaton, Mark Jonathan, Featherston, Carol Ann, Holford, Karen Margaret and Pullin, Rhys 2011. Impact Damage Detection and Assessment in Composite Panels using Macro Fibre Composites Transducers. Journal of Physics: Conference Series 305 (1) , 012049. 10.1088/1742-6596/305/1/012049

Pearson, Matthew R., Eaton, Mark Jonathan, Pullin, Rhys, Featherston, Carol Ann and Holford, Karen Margaret 2012. Energy Harvesting for Aerospace Structural Health Monitoring Systems. Journal of Physics. Conference Series 382 (1) , 012025. 10.1088/1742-6596/382/1/012025

Pearson, Matthew R., Eaton, Mark Jonathan, Szigeti, Eszter, Pullin, Rhys, Clarke, Alastair, Burguete, Richard and Featherston, Carol Ann 2013. Damage detection in composite materials using airborne acoustics. Key Engineering Materials 569-57 , pp. 72-79. 10.4028/www.scientific.net/KEM.569-570.72

Peattie, Kenneth John, Hines, Frances, Jenkins, Heledd Mair, Munday, Maxim C. R., Thankappan, Samarthia, Williams, A. and Wells, Peter Erskine 2006. Critical review of evidence for environmental impacts of UK households: sustainable consumption and production. [Project Report]. London: DEFRA.

Peattie, Kenneth John, Hines, Frances, Thankappan, Samarthia, Williams, Andrew and Wells, Peter Erskine 2007. Short evidence study on UK priority products and services. London: DEFRA.

Pechon, P., Pullin, Rhys, Eaton, Mark Jonathan and Evans, Samuel Lewin 2012. A novel sensor technology may be used to predict impending iatrogenic femur fracture during uncemented hip arthroplasty in real time. Original laboratory research using deer femora [Abstract]. Orthopaedic Proceedings : a supplement of Journal of Bone and Joint Surgery (British) 94-B (SXVIII) , p. 52.

Pernice, M Francesca, Kawashita, Luiz F. and Hallett, Stephen R. 2013. Modeling of delamination migration in DCB test on multidirectional composite laminates. Presented at: 3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2013), Prague, Czech Republic, 5-7 June 2013.

Pernice, M. Francesca, Kawashita, Luiz F. and Hallett, Stephen R. 2013. Analysis of crack migration in laminated composites using conventional and mesh-independent cohesive zone models. Presented at: 19th International Conference on Composite Materials (ICCM19), Montreal, Canada, 28 July - 02 August 2013.

Pettit, Stephen John, Beresford, Anthony Kenneth Charles, Chao, Poti and Purvis, Laura 2011. Defining and measuring multimodal transport services. Presented at: ICTL,

Pettit, Stephen John, Beresford, Anthony Kenneth Charles, Sanchez Rodrigues, Vasco Augusto and Bhattacharya, S. 2010. Estimating the economic and environmental costs of redirecting UK import containers. Presented at: 15th Annual Logistics Research Network Conference, Harrogate, UK, 8-10 September 2010.

Pettit, Stephen John, Beresford, Anthony Kenneth Charles, Sanchez Rodrigues, Vasco Augusto and Bhattacharya, S. 2011. Assessing the economic and environmental costs and benefits of redirecting UK import containers. Presented at: IAME 2011, Santiago, Chile, 25-28 October 2011.

Pettit, Stephen John, Potter, Andrew Thomas, Beresford, Anthony Kenneth Charles and Mason, Robert John 2005. Evaluating the impact of the road transport directive on UK supply chains. Presented at: Logistics Research Network Annual Conference, Plymouth, UK, 7-9 September 2005.

Pham, D. T., Castellani, M. and Fahmy, Ashraf 2008. Learning the inverse kinematics of a robot manipulator using the Bees Algorithm. Presented at: 6th IEEE International Conference on Industrial Informatics, Daejeon, South Korea, 13-16 July 2008. Industrial Informatics, 2008. INDIN 2008. 6th IEEE International Conference on. IEEE, pp. 493-498. 10.1109/INDIN.2008.4618151

Pham, D. T., Castellani, M. and Fahmy, Ashraf 2009. Evolutionary feature selection for artificial neural network pattern classifiers. Presented at: 7th IEEE International Conference on Industrial Informatics (INDIN2009), Cardiff, Wales, 23-26 June 2009. Industrial Informatics, 2009. INDIN 2009. 7th IEEE International Conference on. IEEE, pp. 658-663. 10.1109/INDIN.2009.5195881

Pham, D. T. and Fahmy, Ashraf 2005. Intelligent internal model control of robots for upper-limb rehabilitation. Presented at: 16th IFAC World Congress 2005, Prague, Czech Republic, 4-8 July 2005. Published in: Zitek, Pavel ed. Proceedings of the 16th IFAC World Congress, 2005. International Federation of Automatic Control, p. 1130. 10.3182/20050703-6-CZ-1902.01131

Pham, D. T. and Fahmy, Ashraf 2005. Neuro-fuzzy modelling and control of robot manipulators for trajectory tracking. Presented at: 16th IFAC World Congress 2005, Prague, Czech Republic, 4-8 July 2005. Published in: Zitek, Pavel ed. Proceedings of the 16th IFAC World Congress, 2005. World Congress International Federation of Automatic Control, p. 1452. 10.3182/20050703-6-CZ-1902.01453

Pham, Dinh, Eldukhri, Eldaw Elzaki, Soroka, Anthony John, Zlatanov, V., Packianather, Michael Sylvester, Setchi, Rossitza M., Pham, P. T. N., Thomas, A. and Dadam, Yehya 2008. The innovative production machines and systems network of excellence. In: Putnik, G. D. and Cunha, M .M. eds. Encyclopedia of Networked and Virtual Organisations, Information Science Reference, pp. 725-728.

Pham, Duc Truong, Bigot, Samuel and Dimov, Stefan Simeonov 2003. Rules-5: a rule induction algorithm for classification problems involving continuous attributes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217 (12) , pp. 1273-1286. 10.1243/095440603322769929
file

Pham, Duc Truong, Bigot, Samuel and Dimov, Stefan Simeonov 2004. A new technique for fuzzy rule induction. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing (ICME '04), Sorrento, Italy, pp. 621-626.

Pham, Duc Truong, Bigot, Samuel and Dimov, Stefan Simeonov 2004. A rule merging technique for handling noise in inductive learning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218 (10) , pp. 1255-1268. 10.1243/0954406042369017
file

Pham, Duc Truong, Bigot, Samuel and Dimov, Stefan Simeonov 2006. Rules-F: a fuzzy inductive learning algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (C: J) , pp. 1433-1447. 10.1243/0954406C20004
file

Pham, Duc Truong, Dimov, Stefan Simeonov and Bigot, Samuel 2002. A new pruning technique for inductive learning. Presented at: Proceedings of the 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering(ICME 2002), Ischia, Italy, pp. 449-454.

Pham, Duc Truong, Dimov, Stefan Simeonov, Bigot, Samuel, Ivanov, A. and Popov, Krastimir Borisov 2005. Micro-EDM drilling: accuracy study, advances in integrated design and manufacturing in mechanical engineering. In: Bramley, A., Brissaud, D., Coutellier, D. and McMahon, C. eds. Advances in Integrated Design and Manufacturing in Mechanical Engineering, Dordrecht: Springer, pp. 281-294.

Pham, Duc Truong, Dimov, Stefan Simeonov, Bigot, Samuel, Ivanov, Atanas and Popov, Krastimir Borisov 2004. Micro-EDM - recent developments and research issues. Journal of Materials Processing Technology 149 (1-3) , pp. 50-57. 10.1016/j.jmatprotec.2004.02.008

Pham, Duc Truong, Dimov, Stefan Simeonov, Bigot, Samuel, Ivanov, Atanas and Popov, Krastimir Borisov 2005. Micro EDM drilling: Accuracy study. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. Published in: Bramley, A., Brissaud, D., Coutellier, D. and McMahon, C. A. eds. Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer, pp. 281-294.

Pham, Duc Truong, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Bigot, Samuel, Dobrev, T., Ferri, C., Gandarias, Endika, Hoyle, R. T., Griffiths, C. A., Kettle, J., Lalev, G. M., Li, W., Matthews, C. W., Minev, Roussi, Petkov, Petko Vladev, Packianather, Michael Sylvester, Petrelli, A., Popov, Krastimir Borisov, Rees, A., Sha, B., Thomas, A. and Zhao, H. 2007. Recent advances in micro and nano manufacturing. Presented at: Proceedings of 4th International Conference on Digital Enterprise Technology (DET2007), Bath, UK, pp. 24-33.

Pham, Duc Truong, Dimov, Stefan Simeonov and Setchi, Rossitza 2002. Special Issue on Intelligent Product Support Systems. International Journal of Systems Science 33 (6) , pp. 387-388. 10.1080/00207720210133570

Pham, Duc Truong, Dimov, Stefan Simeonov, Setchi, Rossitza M., Peat, Bernard, Soroka, Anthony John, Brousseau, Emmanuel Bruno Jean Paul, Huneiti, Ammar M., Lagos, Nikolaos, Noyvirt, Alexander Emilov, Pasantonopoulos, Charilaos, Tsaneva, Daniela K. and Tang, Qiao 2004. Product lifecycle management for performance support. Journal of Computing and Information Science in Engineering 4 (4) , pp. 305-315. 10.1115/1.1818687

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, A. J. 2004. An agent system for gathering knowledge within an enterprise. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, pp. 575-579.

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, A. J. 2004. An agent system for the gathering of product fault information. Presented at: Proceedings 2nd IEEE International Conference on Industrial Informatics, Berlin, Germany, pp. 536-539.

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, Anthony John 2001. Knowledge acquisition for intelligent product manuals. Proceedings of the Institution of Mechanical Engineers. Part B: Journal of Engineering Manufacture 215 (1) , pp. 97-103. 10.1243/0954405011515055

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, Anthony John 2004. An agent system for the gathering of product fault information. Presented at: International Conference on Industrial Informatics, Berlin, 24 - 26 June 2004. 2004 2nd IEEE International Conference on Industrial Informatics : Collaborative Automation--One Key For Intelligent Industrial Environments : 24th-26th June, 2004, Berlin, Germany. Piscataway, New Jersey: IEEE, pp. 536-539. 10.1109/INDIN.2004.1417402

Pham, Duc Truong, Eldbib, Khaled, Bigot, Samuel and Packianather, Michael Sylvester 2010. A data ordering method for the RULES family of algorithms. Presented at: I*PROMS 2009 Conference :Innovative Production Machines and Systems, Cardiff, UK, July 6-17 2009. Published in: Pham, Duc Truong, Eldukhri, E. E. and Soroka, A. J. eds. Innovative production machines and systems: fifth I*PROMS Virtual Conference, 6-17th July 2009. Dunbeath: Whittles, pp. 200-205.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, B., Zlatov N., Dimov, Stefan Simeonov, Packianather, Michael Sylvester, Bratanov, D., Toth, A. and Fazekas, G. 2002. Intelligent robotised physiotherapy tested on an 8-DOF mechatronic arm. Presented at: Proceedings 15th Triennial World Congress on Automatic Control, Barcelona, Spain,

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Peat, B., Setchi, Rossitza, Soroka, A. J., Packianather, Michael Sylvester, Thomas, A. J., Dadam, Y. and Dimov, Stefan Simeonov 2004. Innovative production machines and systems (I*PROMS): a network of excellence funded by the EU sixth framework programme. Presented at: Proceedings 2nd IEEE International Conference on Industrial Informatics (INDIN2004), Berlin, Germany, pp. 540-544.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Setchi, Rossitza, Soroka, A. J., Packianather, Michael Sylvester, Thomas, A. J., Dadam, Y. and Dimov, Stefan Simeonov 2004. Integrating European advanced manufacturing research: the FP6 I*PROMS network of excellence. Presented at: Proceedings 4th CIRP (ICME 04), Sorrento, Italy, pp. 543-548.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Setchi, Rossitza M., Soroka, Anthony John, Packianather, Michael Sylvester, Thomas, A., Dadam, Yehya and Dimov, Stefan Simeonov 2006. The Fp6 I*Proms network of excellence: Integrating European advanced manufacturing research. Presented at: 5th International Symposium on Intelligent and Manufacturing Systems (IMS 2006), Sakarya, Turkey, 29-31 May 2006.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Soroka, A., Zlatanov, V., Packianather, Michael Sylvester, Setchi, Rossitza, Pham, P. T. N., Thomas, A. and Dadam, Y. 2005. The EU FP6 I*PROMS network of excellence for innovative production machines and systems. Presented at: Innovative Production Machines and Systems Conference (IPROMS 2005), Cardiff, UK,

Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John 2009. Ultrasonic sensor bidirectional arc-carving mapping between grid-oriented related arcs. Presented at: Fifth I*PROMS Virtual International Conference, 6-17 July 2009. Published in: Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John eds. Proceedings of Innovative Production Machines and Systems: Fifth I*PROMS Virtual International Conference, 6-17 July 2009. Dunbeath: Whittles Publishing, pp. 347-353.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Soroka, Anthony John, Zlatanov, Vladimir, Packianather, Michael Sylvester, Setchi, Rossitza, Pham, Paulette Thi Nga, Thomas, A. and Dadam, Yehya 2005. The EU FP6 I*PROMS Network of Excellence for Innovative production Machines and Systems. Presented at: Virtual International Conference on IPROMS, 4th - 15th July 2005. Published in: Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John eds. Intelligent Production Machines and Systems: First I*PROMS Virtual Conference, 4-15 July 2005. Amsterdam: Elsevier, pp. 1-4.

Pham, Duc Truong, Fahmy, Ashraf and Eldukhri, Eldaw Elzaki 2007. Inductive fuzzy neural network for multi-input multi-output dynamic systems modelling. Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong, Fahmy, Ashraf and Eldukhri, Eldaw Elzaki 2008. Adaptive fuzzy neural network for inverse modeling of robot manipulators. Presented at: 17th IFAC World Congress, Seoul, South Korea, 6-11 July 2008. Published in: Chung, Myung Jin and Misra, Pradeep eds. Proceedings of the 17th IFAC World Congress, 2008, Seoul, Korea, 6-11 July 2008. International Federation of Automatic Control (IFAC), pp. 5308-5313. 10.3182/20080706-5-KR-1001.00893

Pham, Duc Truong, Fahmy, Ashraf and Eldukhri, Eldaw Elzaki 2008. Fuzzy hysteresis coordinator for neuro-fuzzy position controlled manipulators. Presented at: 17th IFAC World Congress, Seoul, South Korea, 6-11 July 2008. Published in: Chung, Myung Jin and Misra, Pradeep eds. Proceedings of the 17th IFAC World Congress, 2008, Seoul, Korea, 6-11 July 2008. International Federation of Automatic Control (IFAC), pp. 9168-9173. 10.3182/20080706-5-KR-1001.01550

Pham, Duc Truong, Grabot, B., Eldukhri, Eldaw Elzaki, Soroka, Anthony John, Zlatanov, Vladimir Ahguelov, Packianather, Michael Sylvester, Setchi, Rossitza M., Pham, P. T. N., Thomas, A. and Dadam, Yehya 2006. Introduction to the special section on Innovative Production Machines and Systems (I*PROMS). Engineering Applications of Artificial Intelligence 19 (6) , pp. 579-581. 10.1016/j.engappai.2006.03.007

Pham, Duc Truong, Ivanov, Atanas, Bigot, Samuel, Popov, Krastimir Borisov and Dimov, Stefan Simeonov 2007. An investigation of tube and rod electrode wear in micro EDM drilling. International Journal of Advanced Manufacturing Technology 33 (1-2) , pp. 103-109. 10.1007/s00170-006-0639-7

Pham, Duc Truong, Ivanov, Atanas, Bigot, Samuel, Popov, Krastimir Borisov and Dimov, Stefan Simeonov 2007. A study of micro-electro discharge machining electrode wear. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 221 (5) , pp. 605-612. 10.1243/0954406JMES413
file

Pham, Duc Truong, Ji, Ze and Soroka, Anthony John 2009. Ultrasonic distance scanning techniques for mobile robots. International Journal of Computer Aided Engineering and Technology 1 (2) , pp. 209-224. 10.1504/IJCAET.2009.022787

Pham, Duc Truong, Packianather, Michael Sylvester and Charles, E. Y. A. 2008. Control chart pattern clustering using a new self-organizing spiking neural network. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (10) , pp. 1201-1211. 10.1243/09544054JEM1054

Pham, Duc Truong, Packianather, Michael Sylvester, Dimov, Stefan Simeonov, Soroka, A. J., Gerard, T., Bigot, Samuel and Salem, Z. 2004. An application of datamining and machine learning techniques in the metal industry. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, pp. 617-620.

Pham, Duc Truong and Setchi, Rossitza 2001. Integrating case-based reasoning and hypermedia documentation for intelligent product support. Presented at: 17th National Conference on Manufacturing Research (NCMR), Cardiff, UK, 4-6 September 2001. Published in: Pham, D.T., Simov, S.S. and O'Hagan, V. eds. Advances in Manufacturing Technology XV. Professional Engineering Publishing, pp. 111-116.

Pham, Duc Truong, Setchi, Rossitza and Dimov, Stefan Simeonov 2002. Enhanced product support through intelligent product manuals. International Journal of Systems Science 33 (6) , pp. 443-449.

Pham, Duc Truong, Soroka, A. J., Eldukhri, Eldaw Elzaki, Pham, P. T. N. and Dimov, Stefan Simeonov 2004. Integrating EU advanced manufacturing research. Presented at: Proceedings 2nd IEEE International Conference on Industrial Informatics, INDIN 2004, Berlin, Germany, pp. 13-18.

Pham, Duc Truong and Soroka, Anthony John 2005. ISLE - a novel immune-system inspired rule extraction algorithm. Presented at: 16th IFAC World Congress 2005, Prague, Czech Republic, 4-8 July 2005. Published in: Zítek, Pavel ed. Proceedings of the 16th IFAC World Congress, 2005. World Congress , vol. 16/1. Laxenburg: International Federation of Automatic Control, p. 1469. 10.3182/20050703-6-CZ-1902.01470

Pham, Duc Truong and Soroka, Anthony John 2005. RULES_IS: an immune-network inspired machine learning algorithm. Presented at: Virtual International Conference on IPROMS, 4th - 15th July 2005. Published in: Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John eds. Intelligent Production Machines and Systems: 1st I*PROMS Virtual Conference, 4-15 July 2005. Amsterdam: Elsevier, pp. 267-274.

Pham, Duc Truong and Soroka, Anthony John 2006. An algorithm based on the immune system for extracting fault classes from instance histories. Presented at: 2nd I*PROMS Virtual International Conference, online, 3-14 July 2006. Published in: Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John eds. Intelligent Production Machines and Systems - 2nd I*PROMS Virtual International Conference, 3-14 July 2006. Oxford: Elsevier, pp. 313-318. 10.1016/B978-008045157-2/50058-4

Pham, Duc Truong and Soroka, Anthony John 2007. Automation of fault information management for customised products. Presented at: ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. Proceedings of ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. ICMA, pp. 295-309.

Pham, Duc Truong and Soroka, Anthony John 2007. An immune-network inspired rule generation algorithm (RULES-IS). Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong and Soroka, Anthony John 2007. Managing fault information for customised products. Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong and Soroka, Anthony John 2010. Pheromone marking as method for implementing memory in the Bees Algorithm. Presented at: IPROMS 2010: Sixth Virtual International Conference, 15-26 November 2010.

Pham, Duc Truong, Soroka, Anthony John, Ghanbarzadeh, Afshin, Koc, Ebubekir, Otri, Sameh and Packianather, Michael Sylvester 2006. Optimising neural networks for identification of wood defects using the bees algorithm. Presented at: 2006 IEEE International Conference on Industrial Informatics, Singapore, 16-18 August 2006. Proceedings of the 2006 IEEE International Conference on Industrial Informatics, Singapore, 16-18 August 2006. IEEE, pp. 1346-1351. 10.1109/INDIN.2006.275855

Pham, Duc Truong, Soroka, Anthony John, Koc, E., Ghanbarzadeh, A. and Otri, S. 2007. Some applications of the bees algorithm in engineering design and manufacture. Presented at: ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. Proceedings of ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. ICMA, pp. 782-794.

Pham, Duc Truong, Soroka, Anthony John, Packianather, Michael Sylvester, Ghanbarzadeh, A., Koc, E. and Otri, S. 2007. Using the bees algorithm to train neural networks for wood defect identification. Presented at: 40th CIRP International Seminar on Manufacturing Systems, Liverpool, UK, 30 May – 1 June 2007.

Pham, Duc Truong, Wang, Z., Yang, Y. and Packianather, Michael Sylvester 2002. Statistical analysis of signal-to-noise ratios in fringe pattern matching. Presented at: 6th Annual International Conference on Signal Processing Proceedings, Institute of Electrical & Electronics Engineers Inc Peoples Post & Telecommunications Publishing House, Beijing, China, pp. 636-639.

Pham, Duc Truong, Zlatov, Z., Eldukhri, Eldaw Elzaki, Dimov, Stefan Simeonov, Bratanov, D., Dobrev, T., Packianather, Michael Sylvester and Fahmy, A. 2001. Modelling and control of an 8-DOF mechatronic limb. Presented at: 8th IEEE International Conference on Mechatronics and Machine Vision in Practice, Hong Kong, China, pp. 314-317.

Piboonrungroj, Pairach and Disney, Stephen Michael 2009. Supply chain collaboration in tourism: a transaction cost economics perspective. Presented at: 2nd Biennial Conference of the International Association for Tourism Economics (IATE) 2009, Chiang Mai, Thailand, 11-13 December 2009.

Piboonrungroj, Pairach and Disney, Stephen Michael 2009. Tourism supply chains: a conceptual framework. Presented at: Exploring Tourism III: Issues in PhD Research Conference, Nottingham, UK, 1-2 July 2009.

Piboonrungroj, Pairach and Disney, Stephen Michael 2011. Supply chain collaboration, inter-firm trust and logistics performance: evidence from the tourism sector: a structural equation model. Presented at: 18th Annual Euroma Conference, Cambridge, 3-6 July 2011.

Piboonrungroj, Pairach and Disney, Stephen Michael 2011. Using R to test transaction cost measurement for supply chain relationship: a structural equation model. Presented at: R User Conference, Warwick, 16-18 August.

Piboonrungroj, Pairach and Disney, Stephen Michael 2012. Impact of inter-firm collaboration on firm performance: Comparisons from the perspective of different supply chain members. Presented at: 4th World Production and Operations Management Conference, Amsterdam, The Netherlands, 1-5 July 2012.
file

Piboonrungroj, Pairach, Disney, Stephen Michael and Williams, S. 2011. Mediating effect of transaction costs in supply chain relationships: an empirical examination. Presented at: British Academy of Management Conference (BAM) 2011, Birmingham, UK, 13-15 September.
file

Ponte, Borja, Naim, Mohamed and Syntetos, Argyrios 2019. The effect of returns volume uncertainty on the dynamic performance of closed-loop supply chains. Journal of Remanufacturing 10.1007/s13243-019-00070-x
file

Potter, Andrew, Towill, Denis Royston and Disney, Stephen Michael 2007. Integrating transport into supply chains: vendor managed inventory (VMI). In: Jung, Hosang, Chen, Fengshan Frank and Jeong, Bongju eds. Trends in Supply Chain Design and Management: Technologies and Methodologies, Springer Series in Advanced Manufacturing, London: Springer, pp. 331-344. (10.1007/978-1-84628-607-0_14)
file

Potter, Andrew Thomas 2003. Integrating transport into supply chains. Logistics and Transport Focus 5 (8) , pp. 67-69.

Potter, Andrew Thomas 2011. Using ‘Base’ and ‘Surge’ strategies to reduce uncertainty in logistics operations. Presented at: SAPICS 33rd Annual Conference, Sun City, South Africa, 26-28 June 2011.

Potter, Andrew Thomas 2011. Uncertainty and FMCG distribution network performance: A UK/South Africa comparison. Presented at: 16th Annual Logistics Research Network Conference, Southampton, UK, 7-9 September 2011.

Potter, Andrew Thomas 2012. Empirical logistics and supply chain research in Africa. Presented at: 17th International Symposium on Logistics, Cape Town, South Africa, 8-11 July 2012.

Potter, Andrew Thomas and Bowles, D. 2006. Developing the Quick Scan Audit Methodology as a tool for the steel industry. Presented at: 14th International Working Seminar on Production Economics, Innsbruck, Austria, 20-26 February 2006.

Potter, Andrew Thomas, Breite, Rainer, Naim, Mohamed Mohamed and Vanharanta, Hannu 2004. The potential for achieving mass customization in primary production supply chains via a unified taxonomy. Production Planning & Control 15 (4) , pp. 472-481. 10.1080/0953728042000238746

Potter, Andrew Thomas and Disney, Stephen Michael 2006. Bullwhip and batching: An exploration. International Journal of Production Economics 104 (2) , pp. 408-418. 10.1016/j.ijpe.2004.10.018