Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Browse by Current Cardiff authors

Number of items: 121.

Yin, Ruonan, Xue, Bo, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Geng, Yanquan and Yan, Yongda 2024. Characterizing the electric field- and rate-dependent hysteresis of piezoelectric ceramics shear motion with the Bouc-Wen model. Sensors and Actuators A: Physical 367 , 115044. 10.1016/j.sna.2024.115044
Item availability restricted.
file

Pekok, Mulla Ahmet ORCID: https://orcid.org/0000-0003-1888-5057, Setchi, Rossi ORCID: https://orcid.org/0000-0002-7207-6544, Ryan, Michael ORCID: https://orcid.org/0000-0002-8104-0121, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Han, Quanquan and Gu, Dongdong 2023. Graphene nanoplatelets reinforced Al-Cu-Mg composite fabricated using laser powder bed fusion: microstructure, mechanical properties, and wear behaviour. International Journal of Advanced Manufacturing Technology 128 , pp. 1597-1613. 10.1007/s00170-023-12016-6
file

Shen, Hao, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 and Kulasegaram, Sivakumar ORCID: https://orcid.org/0000-0002-9841-1339 2023. Assessment and validation of SPH modeling for nano-indentation. Computational Particle Mechanics 10 , pp. 603-613. 10.1007/s40571-022-00514-5
file

Baqain, Sameeh, Borodich, Feodor M. ORCID: https://orcid.org/0000-0002-7935-0956 and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2023. Effect of cutting direction on nanomachining of copper when using a three-sided pyramidal AFM tip. Presented at: 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS), 30 August - 01 September. 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS). IEEE, 10.1109/Nanoman-AETS56035.2022.10119497

Xue, Bo, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 and Bowen, Chris 2023. Modelling of a shear-type piezoelectric actuator for AFM-based vibration-assisted nanomachining. International Journal of Mechanical Sciences 243 , 108048. 10.1016/j.ijmecsci.2022.108048
file

Sharma, Anuj, Kulasegaram, Sivakumar ORCID: https://orcid.org/0000-0002-9841-1339, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Esien, Kane and Read, Dan ORCID: https://orcid.org/0000-0002-4178-4986 2023. Investigation of nanoscale scratching on copper with conical tools using particle-based simulation. Nanomanufacturing and metrology 6 (1) , 5. 10.1007/s41871-023-00179-5
file

Azizova, Liana, Morgan, David ORCID: https://orcid.org/0000-0002-6571-5731, Rowlands, Jeff, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Kulik, Tetiana, Palianytsia, Borys, Mansell, Jason Peter, Birchall, James ORCID: https://orcid.org/0000-0001-8521-6924, Wilkinson, Thomas ORCID: https://orcid.org/0000-0003-0397-6079, Sloan, Alastair ORCID: https://orcid.org/0000-0002-1791-0903 and Nishio Ayre, Wayne ORCID: https://orcid.org/0000-0003-2405-1876 2022. Parameters controlling octadecyl phosphonic acid self-assembled monolayers on titanium dioxide for anti-fouling biomedical applications. Applied Surface Science 604 , 154462. 10.1016/j.apsusc.2022.154462
file

Baqain, Sameeh, Borodich, Feodor M. ORCID: https://orcid.org/0000-0002-7935-0956 and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2022. Characterisation of an AFM tip bluntness using indentation of soft materials. Borodich, F.M. and Jin, X., eds. Contact Problems for Soft, Biological and Bioinspired Materials, Vol. 15. Biologically-Inspired Systems, Cham: pp. 221-242. (10.1007/978-3-030-85175-0_11)

Baqain, Sameeh, Borodich, Feodor ORCID: https://orcid.org/0000-0002-7935-0956 and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2022. Theoretical study of factors affecting the effective rake angle of AFM tips for nanomachining applications. Presented at: 7th International Conference on Nanomanufacturing, Xi’an, China, 17-19 Nov 2021. Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021). Smart Innovation, Systems and Technologies , vol.296 Singapore: Springer, 131–139. 10.1007/978-981-19-1918-3_15

Shen, Hao, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 and Kulasegaram, Sivakumar ORCID: https://orcid.org/0000-0002-9841-1339 2022. Assessment and investigation of SPH modelling for nano-scratching. Presented at: 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS), 30 August - 01 September 2022. 2022 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS). IEEE, 10.1109/Nanoman-AETS56035.2022.10119520

McLaren, Rachel, Laycock, Christian, Owen, Gareth and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2021. Examining slit pore widths within plasma-exfoliated graphitic material utilising Barret-Joyner-Halenda analysis. New Journal of Chemistry 45 (27) , pp. 12071-12080. 10.1039/D1NJ01702K
file

Jiao, Yang, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Nishio Ayre, Wayne ORCID: https://orcid.org/0000-0003-2405-1876, Gait-Carr, Edward, Shen, Xiaojun, Wang, Xiaoxiang, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727, Zhu, Hanxing ORCID: https://orcid.org/0000-0002-3209-6831 and He, Weifeng 2021. In vitro cytocompatibility of a Zr-based metallic glass modified by laser surface texturing for potential implant applications. Applied Surface Science 547 , 149194. 10.1016/j.apsusc.2021.149194
file

Giasin, K., Dad, A., Brousseau, E. B. ORCID: https://orcid.org/0000-0003-2728-3189, Mia, M., Pimenov, D., Morkavuk, S. and Köklü, U. 2021. The effects of through tool cryogenic machining on the hole quality in GLARE® fibre metal laminates. Journal of Manufacturing Processes 64 , pp. 996-1012. 10.1016/j.jmapro.2021.02.010

Borodich, Feodor M. ORCID: https://orcid.org/0000-0002-7935-0956, Al-Musawi, Raheem S., Brousseau, Emmanuel B. ORCID: https://orcid.org/0000-0003-2728-3189 and Evans, Sam L. ORCID: https://orcid.org/0000-0003-3664-2569 2021. Comparison between torsional spring constants of rectangular and V-shaped AFM cantilevers. IEEE Transactions on Nanotechnology 20 , pp. 168-176. 10.1109/TNANO.2021.3059411
file

Jiao, Yang, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Kosai, Koji, Lunt, Alexander J.G., Yan, Jiwang, Han, Quanquan, Zhu, Hanxing ORCID: https://orcid.org/0000-0002-3209-6831, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 and He, Weifeng 2021. Softening and hardening on a Zr-based bulk metallic glass induced by nanosecond laser surface melting. Materials Science and Engineering: A 803 , 140497. 10.1016/j.msea.2020.140497
file

Jiao, Yang, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Shen, Xiaojun, Wang, Xiaoxiang, Han, Quanquan, Zhu, Hanxing ORCID: https://orcid.org/0000-0002-3209-6831, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 and He, Weifeng 2020. Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing. Journal of Materials Processing Technology 283 , 116714. 10.1016/j.jmatprotec.2020.116714
file

Giasin, K., Hawxwell, J., Sinke, J., Dhakal, H., Köklü, U. and Brousseau, E. ORCID: https://orcid.org/0000-0003-2728-3189 2020. The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE® fibre metal laminates. International Journal of Advanced Manufacturing Technology 107 (5-6) , pp. 2817-2832. 10.1007/s00170-020-05211-2
file

Jiao, Yang, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Han, Quanquan, Zhu, Hanxing ORCID: https://orcid.org/0000-0002-3209-6831 and Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 2019. Investigations in nanosecond laser micromachining on the Zr52.8Cu17.6Ni14.8Al9.9Ti4.9 bulk metallic glass: experimental and theoretical study. Journal of Materials Processing Technology 273 , 116232. 10.1016/j.jmatprotec.2019.05.013
file

Borodich, Feodor ORCID: https://orcid.org/0000-0002-7935-0956, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Clarke, Alastair ORCID: https://orcid.org/0000-0002-3603-6000, Pepelyshev, Andrey ORCID: https://orcid.org/0000-0001-5634-5559 and Sanchez-Lopez, Juan Carlos 2019. Roughness of deposited carbon-based coatings and its statistical characteristics at nano and microscales. Frontiers in Mechanical Engineering 5 (4) , 24. 10.3389/fmech.2019.00024
file

Mandal, Soumen ORCID: https://orcid.org/0000-0001-8912-1439, Thomas, Evan L. H., Werrell, Jessica M., Klemencic, Georgina M. ORCID: https://orcid.org/0000-0002-2125-9754, Ash, Johnathan, Brousseau, Emmanuel B. ORCID: https://orcid.org/0000-0003-2728-3189 and Williams, Oliver A. ORCID: https://orcid.org/0000-0002-7210-3004 2019. Chemical mechanical polishing of nanocrystalline diamond. Yang, Nianjun, ed. Novel Aspects of Diamond: From Growth to Applications, Vol. 121. Topics in Applied Physics, Chem: Springer, pp. 53-89. (10.1007/978-3-030-12469-4_3)

Kumar, D., Stoichkov, V., Brousseau, E. ORCID: https://orcid.org/0000-0003-2728-3189, Smith, G. C. and Kettle, J. 2019. Correction: high performing AgNW transparent conducting electrodes with a sheet resistance of 2.5 Ω Sq−1 based upon a roll-to-roll compatible post-processing technique. Nanoscale 11 (12) , p. 5771. 10.1039/C9NR90049G

Giasin, Khaled ORCID: https://orcid.org/0000-0002-3992-8602, Gorey, G., Byrne, Carlton, Sinke, J. and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2019. Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates. Composite Structures 212 , pp. 159-174. 10.1016/j.compstruct.2019.01.023
file

Kumar, D., Stoichkov, V., Brousseau, E. ORCID: https://orcid.org/0000-0003-2728-3189, Smith, G. C. and Kettle, J. 2019. High performing AgNW transparent conducting electrodes with a sheet resistance of 2.5 ? Sq?1 based upon a roll-to-roll compatible post-processing technique. Nanoscale 11 , pp. 5760-5769. 10.1039/C8NR07974A
file

Geng, Yanquan, Yan, Yongda, Wang, Jiqiang, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Sun, Yanwen and Sun, Yazhou 2018. Fabrication of periodic nanostructures using AFM tip-based nanomachining: combining groove and material pile-Up topographies. Engineering 4 (6) , pp. 787-795. 10.1016/j.eng.2018.09.010
file

Jones, Josh, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 and Read, Daniel ORCID: https://orcid.org/0000-0002-4178-4986 2018. AFM tip-based cutting of grooves on permalloy nanowires for controlling the motion of magnetic domain walls. Presented at: World Congress on Micro and Nano Manufacturing, Portoroz, Slovenia, 18-20 September 2018. 10.3850/978-981-11-2728-1_44
file

Vella, Pierre C., Dimov, Stefan S., Minev, Roussi and Brousseau, Emmanuel B. ORCID: https://orcid.org/0000-0003-2728-3189 2018. Technology maturity assessment of micro and nano manufacturing processes and process chains. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (8) , pp. 1362-1383. 10.1177/0954405416668922

Mandal, Soumen ORCID: https://orcid.org/0000-0001-8912-1439, Thomas, Evan L. H., Gines, Laia ORCID: https://orcid.org/0000-0001-9980-054X, Morgan, David ORCID: https://orcid.org/0000-0002-6571-5731, Green, Joshua, Brousseau, Emmanuel B. ORCID: https://orcid.org/0000-0003-2728-3189 and Williams, Oliver A. ORCID: https://orcid.org/0000-0002-7210-3004 2018. Redox agent enhanced chemical mechanical polishing of thin film diamond. Carbon 130 , pp. 25-30. 10.1016/j.carbon.2017.12.077
file

Geng, Yanquan, Brousseau, Emmanuel B. ORCID: https://orcid.org/0000-0003-2728-3189, Zhao, Xuesen, Gensheimer, Michael and Bowen, Christopher R. 2018. AFM tip-based nanomachining with increased cutting speed at the tool-workpiece interface. Precision Engineering 51 , pp. 536-544. 10.1016/j.precisioneng.2017.10.009
file

He, Yang, Yan, Yongda, Geng, Yanquan and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2018. Fabrication of periodic nanostructures using dynamic plowing lithography with the tip of an atomic force microscope. Applied Surface Science 427 (A) , pp. 1076-1083. 10.1016/j.apsusc.2017.08.134
file

Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Thiery, S., Arnal, B., Nyiri, E., Gibaru, O. and Mayor, J. R. 2017. A Computer-Aided Design and manufacturing implementation of the atomic force microscope tip-based nanomachining process for two-dimensional patterning. Journal of Micro and Nano-Manufacturing 5 (4) , 041003. 10.1115/1.4037694

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 and Sun, Yanwen 2017. AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory. Journal of Materials Processing Technology 248 , pp. 236-248. 10.1016/j.jmatprotec.2017.05.028
file

Alraziqi, Zaynab Naif Rasheed, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Borodich, Feodor M. ORCID: https://orcid.org/0000-0002-7935-0956 2017. A new metric to assess the tip condition of AFM probes based on three-dimensional data. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE), Newcastle upon Tyne, UK, 20-21 October 2016. Students on Applied Engineering (ICSAE), International Conference for. IEEE, pp. 24-29. 10.1109/ICSAE.2016.7810155

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Geng, Yanquan, Gensheimer, Michael and Bowen, Chris 2017. Increasing the processing speed of AFM tip-based nanomachining at the tool-workpiece interface. Presented at: 2017 World Congress on Micro and Nano Manufacturing, Kaohsiung, Taiwan, 27-30 March 2017. 2017 World Congress on Micro and Nano Manufacturing. pp. 343-346.

Werrell, Jessica, Mandal, Soumen ORCID: https://orcid.org/0000-0001-8912-1439, Thomas, Evan L. H., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Lewis, Ryan, Borri, Paola ORCID: https://orcid.org/0000-0002-7873-3314, Davies, Philip Rosser ORCID: https://orcid.org/0000-0003-4394-766X and Williams, Oliver Aneurin ORCID: https://orcid.org/0000-0002-7210-3004 2017. Effect of slurry composition on the chemical mechanical polishing of thin diamond films. Science and Technology of Advanced Materials 18 (1) , pp. 654-663. 10.1080/14686996.2017.1366815.
file

Ding, Z., Stoichkov, V., Horie, M., Brousseau, E. ORCID: https://orcid.org/0000-0003-2728-3189 and Kettle, J. 2016. Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications. Solar Energy Materials and Solar Cells 157 , pp. 305-311. 10.1016/j.solmat.2016.05.053
file

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel Bruno Jean-Paul ORCID: https://orcid.org/0000-0003-2728-3189, Cui, Xing, Yu, Bowen, Zhao, Xuesen and Hu, Zhenjiang 2016. Machining complex three-dimensional nanostructures with an atomic force microscope through the frequency control of the tip reciprocating motions. Journal of Manufacturing Science and Engineering 138 (12) , 124501 (8 pages). 10.1115/1.4034892

Ulmeanu, M., Petkov, Petko ORCID: https://orcid.org/0000-0003-2185-2651, Ursescu, D., Jipa, F., Harniman, R, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Ashfold, M. 2016. Substrate surface patterning by optical near field modulation around colloidal particles immersed in a liquid. Optics Express 24 (24) , pp. 27340-27351. 10.1364/OE.24.027340
file

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Yu, Bowen, Qu, Shengnan, Hu, Zhenjiang and Zhao, Xuesen 2016. Processing outcomes of the AFM probe-based machining approach with different feed directions. Precision Engineering 46 , pp. 288-300. 10.1016/j.precisioneng.2016.05.009
file

Al-Musawi, R. S. J., Brousseau, E. B. ORCID: https://orcid.org/0000-0003-2728-3189, Geng, Y. and Borodich, F. M. ORCID: https://orcid.org/0000-0002-7935-0956 2016. Insight into mechanics of AFM tip-based nanomachining: bending of cantilevers and machined grooves. Nanotechnology 27 (38) , 385302. 10.1088/0957-4484/27/38/385302
file

Williams, E. and Brousseau, E. B. ORCID: https://orcid.org/0000-0003-2728-3189 2016. Nanosecond laser processing of Zr41.2Ti13.8Cu12.5Ni10Be22.5 with single pulses. Journal of Materials Processing Technology 232 , pp. 34-42. 10.1016/j.jmatprotec.2016.01.023
file

Williams, Eleri and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2016. Simulation and experimental study of nanosecond laser micromachining of commercially pure titanium. Journal of Micro and Nano-Manufacturing 4 (1) , 011004. 10.1115/1.4031892

Alraziqi, Zaynab, Mukhtar, Nur Farah Hafizah and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2016. Comparison of two AFM probe inspection techniques for three-dimensional tip characterization. Presented at: 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016, University of Nottingham, Nottingham, United Kingdom, 30 May - 3 June 2016. Published in: Bointon, P., Leach, Ronald K. and Southon, N. eds. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Cranfield, Bedfordshire, UK: euspen, pp. 639-646.

Alraziqi, Zaynab, Mukhtar, Nur Farah Hafizah and Brousseau, Emmanuel Bruno Jean-Paul ORCID: https://orcid.org/0000-0003-2728-3189 2016. Comparison of two AFM probe inspection techniques for three-dimensional tip characterisation. Presented at: EUSPEN: 16th International Conference & Exhibition, Nottingham, UK, 30 May - 3 June 2016. Published in: Bointon, P., Leach, R. and Southon, N. eds. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: EUSPEN, pp. 59-60.

Al-Musawi, Raheem and Brousseau, Emmanuel Bruno Jean-Paul ORCID: https://orcid.org/0000-0003-2728-3189 2016. Influence of the mechanical behaviour of cantilevers on the topography of nano-scale grooves during AFM tip-based machining. Presented at: EUSPEN: 16th International Conference & Exhibition, Nottingham, UK, 30 May - 3 June 2016. Published in: Bointon, P., Leach, R. and Southon, N. eds. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. Bedford: EUSPEN, pp. 383-384.

Al-Musawi, Raheem Sadoon Jamel and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2016. Assessing the applied normal load during contact mode AFM: An issue with the conventional approach. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE), Newcastle upon Tyne, UK, 20-21 October 2016. Students on Applied Engineering (ICSAE), International Conference for. IEEE, pp. 119-122. 10.1109/ICSAE.2016.7810172

Williams, Eleri, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Lavery, Nick, Mehraban, Shahin, Keast, Victoria, Hughes, Colan and Harris, Kenneth ORCID: https://orcid.org/0000-0001-7855-8598 2016. Nanosecond laser milling of the amorphous alloy Zr41.2Ti13.8Cu12.5Ni10Be22.5. Presented at: 11 th International Conference on Multi-Material Micro Manufacture (4M2016), co-organised with 10th International Workshop on Microfactories (IWMF2016), Lyngby, Denmark,, 13-15 September 2016.

Ulmeanu, M., Petkov, Petko ORCID: https://orcid.org/0000-0003-2185-2651, Ursescu, D., Maraloiu, V. A., Jipa, F., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Ashfold, M. N. R. 2015. Pattern formation on silicon by laser-initiated liquid-assisted colloidal lithography. Nanotechnology 26 (45) , 455303. 10.1088/0957-4484/26/45/455303

Lynch, C., Richards, C., Dorrington, P., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Turner, M. 2015. Measurement of forces from epidural catheter insertion. Anaesthesia 70 (10) , pp. 1215-1216. 10.1111/anae.13214

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Al-Musawi, Raheem and Lebiez, Damien 2015. A hybrid roll-to-roll AFM set-up for high throughput tip-based nano-machining. Manufacturing Letters 6 , pp. 10-13. 10.1016/j.mfglet.2015.11.002

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric and Gibaru, Olivier 2015. A simple and generic CAD/CAM approach for AFM probe-based machining. Presented at: 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015, University of Huddersfield, West Yorkshire, UK, 17-18 March 2015. pp. 362-368.

Prokopovich, Polina ORCID: https://orcid.org/0000-0002-5700-9570, Kobrick, Mathias, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Perni, Stefano 2015. Potent antimicrobial activity of bone cement encapsulating silver nanoparticles capped with oleic acid. Journal of Biomedical Materials Research: Part B - Applied Biomaterials 103 (2) , pp. 273-281. 10.1002/jbm.b.33196
file

Vella, Pierre, Dimov, Stefan, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Whiteside, Ben 2015. A new process chain for producing bulk metallic glass replication masters with micro-and nano-scale features. International Journal of Advanced Manufacturing Technology 76 (1-4) , pp. 523-543. 10.1007/s00170-014-6148-1

Preedy, Emily Callard, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Evans, Samuel Lewin ORCID: https://orcid.org/0000-0003-3664-2569, Perni, Stefano and Prokopovich, Polina ORCID: https://orcid.org/0000-0002-5700-9570 2014. Adhesive forces and surface properties of cold gas plasma treated UHMWPE. Colloids and Surfaces A: Physicochemical and Engineering Aspects 460 , pp. 83-89. 10.1016/j.colsurfa.2014.03.052
file

Elderrat, Haithem, Davies, Huw Charles ORCID: https://orcid.org/0000-0003-2656-0260 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2014. Investigation of the foam filled fluid technology for anti-vibration devices. International Journal of Structural Analysis & Design 1 (3) , pp. 182-187.

Williams, Eleri, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Rees, Andrew 2014. Nanosecond Yb fibre laser milling of aluminium: effect of process parameters on the achievable surface finish and machining efficiency. International Journal of Advanced Manufacturing Technology 74 (5-8) , pp. 769-780. 10.1007/s00170-014-6038-6

Thomas, Evan L. H., Mandal, Soumen ORCID: https://orcid.org/0000-0001-8912-1439, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Williams, Oliver Aneurin ORCID: https://orcid.org/0000-0002-7210-3004 2014. Silica based polishing of {100} and {111} single crystal diamond. Science and Technology of Advanced Materials 15 (3) , pp. 1-7. 10.1088/1468-6996/15/3/035013
file

Elderrat, Haithem, Davies, Huw Charles ORCID: https://orcid.org/0000-0003-2656-0260 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2014. Investigation of the foam filled fluid technology for anti-vibration devices. Presented at: Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2014, London, UK, 1-2 June 2014. Published in: Kumar, Rakesh ed. Proceedings of the International Conference on Proceedings on Advances in Civil, Structural and Mechanical Engineering - CSM 2014. Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering. Santa Barbara, CA: Institute of Research Engineers and Doctors,

Omar, F., Brousseau, E. ORCID: https://orcid.org/0000-0003-2728-3189, Elkaseer, A. ORCID: https://orcid.org/0000-0002-2500-3617, Kolew, A., Prokopovich, P. ORCID: https://orcid.org/0000-0002-5700-9570 and Dimov, S. 2014. Development and experimental validation of an analytical model to predict the demoulding force in hot embossing. Journal of Micromechanics and Microengineering 24 (5) , -. 10.1088/0960-1317/24/5/055007
file

Elkaseer, Ahmed ORCID: https://orcid.org/0000-0002-2500-3617 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2014. Modeling the surface generation process during AFM probe-based machining: simulation and experimental validation. Surface Topography: Metrology and Properties 2 (2) , 025001. 10.1088/2051-672X/2/2/025001
file

Ulmeanu, Magdalena, Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651, Hirshy, Hassan ORCID: https://orcid.org/0000-0003-0281-3681 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2014. Formation of ordered arrays of Si and GaAs nanostructures by single-shot laser irradiation in near-field at the solid/liquid interface. Materials Research Express 1 (1) , 015030. 10.1088/2053-1591/1/1/015030

Mukhtar, Nur Farah Hafizah, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Prickett, Paul William ORCID: https://orcid.org/0000-0001-8985-7278 2014. Study of silicon tip wear during AFM probe-based machining of single crystal copper. Presented at: Ninth International Conference on MicroManufacturing (ICOMM 2014), Nanyang Technological University (NTU) and National University of Singapore (NUS), Singapore, 25-28 March 2014.

Islam, Nazrul and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2014. Implementing a multi-staged methodology to micro and nanotechnology: technology maturity assessment and framework. International Journal of Productivity and Performance Management 63 (2) , pp. 170-193. 10.1108/IJPPM-01-2013-0010

Hashoosh, Ahmed, Hirshy, Hassan ORCID: https://orcid.org/0000-0003-0281-3681, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Moosa, Ahmed 2013. Fabrication of aluminium nanowires by differential pressure injection. ISRN Nanomaterials 2013 , 132798. 10.1155/2013/132798

Rees, Andrew, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 and Griffiths, Christian Andrew 2013. Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding. International Journal of Advanced Manufacturing Technology 64 (9-12) , pp. 1395-1410. 10.1007/s00170-012-4110-7

Kettle, J., Rees, A., Brousseau, Emmanuel Bruno John Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Horie, M. 2013. Low-temperature thermal nanoimprint lithography of anti-reflective structures for flexible low band gap organic solar cells. Journal of Physics D: Applied Physics 46 (10) , 105102. 10.1088/0022-3727/46/10/105102

Omar, Fuad, Elkaseer, Ahmed ORCID: https://orcid.org/0000-0002-2500-3617, Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189, Kolew, Alexander and Prokopovich, Polina ORCID: https://orcid.org/0000-0002-5700-9570 2013. Demoulding forces in hot embossing: Model development and validation. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM2013). 8th International Conference on MicroManufacturing (ICOMM2013). pp. 642-649.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric, Gibaru, Olivier and Mayor, J. Rhett 2013. Towards CNC automation in AFM probe-based nano machining. Presented at: 8th International Conference on Manufacturing (ICOMM 2012), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM 2013). 8th International Conference on MicroManufacturing (ICOMM2013). International Conference on MicroManufacturing, pp. 499-506.

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Hirshy, Hassan ORCID: https://orcid.org/0000-0003-0281-3681 2013. Simulation and experimental study of the effects of process factors on the uniformity of the residual layer thickness in hot embossing. Journal of Micro and Nano-Manufacturing 1 (2) , 021002. 10.1115/1.4024097

Vella, Pierre, Dimov, Stefan, Whiteside, Ben, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Tuinea-Bobe, Cristina, Gant, Colin, Minev, Ekaterin and Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651 2013. Validation of a new process chain for producing bulk metallic glass replication masters with micro and nano-scale features. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 103-108.

Williams, Eleri and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2013. Single pulse nanosecond laser processing of zirconium-based bulk metallic glass. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 152-155.

Elkaseer, Ahmed ORCID: https://orcid.org/0000-0002-2500-3617 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2013. Surface roughness prediction in AFM probe-based machining. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 97-100.

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Hirshy, Hassan ORCID: https://orcid.org/0000-0003-0281-3681 2012. Process factors influence on residual layer uniformity in hot embossing. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012. Published in: Noll, Humbert, Adamovic, Nadja and Dimov, Stefan eds. Multi-Material Micro Manufacture Proceedings of the 9th International Conference on. 9th International Conference on Multi-Material Micro Manufacture (4M2012). Singapore: Research Publishing, pp. 81-84. 10.3850/978-981-07-3353-7_302

Elkaseer, Ahmed ORCID: https://orcid.org/0000-0002-2500-3617 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2012. AFM probe-based mechanical machining: Modelling of the surface generation process. Presented at: 7th International Conference on MicroManufacturing (ICOMM2012), Chicago, IL USA, 12-14 March 2012. Proceedings of the 7th International Conference on MicroManufacturing (ICOMM2012. 7th International Conference on MicroManufacturing (ICOMM2012). International Conference on MicroManufacturing, pp. 78-84.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Minev, Roussi and Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 2012. Micro- and nano-manufacturing: Challenges and opportunities. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226 (1) , pp. 3-15. 10.1177/0954406211422972

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Eldukhri, Eldaw Elzaki 2011. Recent advances on key technologies for innovative manufacturing. Journal of Intelligent Manufacturing 22 (5) , pp. 675-691. 10.1007/s10845-009-0328-0

Scholz, Steffen Gerhard, Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Lalev, Georgi M. and Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651 2011. Manufacturing routes for replicating micro and nano surface structures with bio-mimetic applications. CIRP Journal of Manufacturing Science and Technology 4 (4) , pp. 347-356. 10.1016/j.cirpj.2011.05.004

Vella, Pierre C., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Minev, Ekaterin, Dobrev, Todor, Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651 and Velkova, Valentina 2011. Length scale integration: implementation of a new process chain for producing replication masters with micro and nano scale features. Presented at: 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, Germany, 8–10 November 2011. Published in: Kück, Heinz, Reinecke, Holger and Dimov, Stefan Simeonov eds. Proceedings of the 8th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 343-347. 10.3850/978-981-07-0319-6_223

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Krohs, F., Caillaud, E., Dimov, Stefan Simeonov, Gibaru, O. and Fatikow, S. 2010. Development of a novel process chain based on Atomic Force Microscopy scratching for small and medium series production of polymer nanostructured components. Journal of Manufacturing Science and Engineering 132 (3) , pp. 305-315. 10.1115/1.4001481

Griffiths, Christian Andrew, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Worgull, M., Heckele, M., Nestler, J. and Auerswald, J. 2010. Investigation of polymer inserts as prototyping tooling for micro injection moulding. The International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 111-123. 10.1007/s00170-009-2038-3

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Chouquet, C., Gavillet, J. and Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 2010. Investigation of surface treatment effects in micro-injection-moulding. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 99-110. 10.1007/s00170-009-2000-4

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov and Pham, Duc Truong 2010. Some recent advances in multi-material micro- and nano- manufacturing. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 161-180. 10.1007/s00170-009-2214-5

Ferri, C., Faraway, J. and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2010. Calibration of a white light interferometer for the measurement of micro-scale dimensions. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 125-135. 10.1007/s00170-009-2050-7

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov, Minev, Ekaterin and Matthews, C. 2010. Methodology for capability maturity assessment of MNT chains. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 249-252.

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov, Scholz, S. and Matthews, C. 2010. Capability maturity study of the horizontal and vertical integration of structuring, patterning and characterisation MNTs. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 253-256.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 2010. A methodology for evaluating the technological maturity of micro and nano fabrication processes. Presented at: Fifth International Precision Assembly Seminar, IPAS 2010, Chamonix, France, pp. 329-336.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Scholz, S. and Rees, A. 2010. Fabrication of 3D structures using Atomic Force Microscopy scratching. Presented at: Sixth International Conference on Multi-Material Micro Manufacture, 4M2010, Oyonnax, France, pp. 65-68.

Vella, P. C., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Minev, R. and Dimov, Stefan Simeonov 2010. A methodology for technology maturity assessment of micro and nano manufacturing processes and process chains. Presented at: 5th International Conference on Micro Manufacturing (ICOMM/4M2010), Madison, USA, pp. 327-334.

Dimov, Stefan Simeonov, Matthews, C. W., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727, de Grave, A., Fillon, B., Weinzierl, M., Engel, U., Johander, P., Jung, E., Kirby, P. B., Mattsson, L., Richter, M. and Schoth, A. 2009. 4M Network of Excellence, Progress Report 2009. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany, pp. 1-9.

Barton, R. and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2009. Application of a methodology for assessing technology maturity. Presented at: Conference of the International Association for Management of Technology, (EuroMOT 2009), Glasgow, UK,

Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727, Islam, N., Wong, H., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Dorrington, P. 2009. Micro and nano manufacturing Technologies - Adoption Behaviour & Challenges. Presented at: 10th International Conference on Management of Innovative Technologies, Fiesa, Slovenia,

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 2009. Technology maturity assessment of micro and nano manufacturing processes. Presented at: 4M2009 - International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, pp. 257-262.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Krohs, F., Dimov, Stefan Simeonov, Griffiths, C. A., Scholz, S. G., Rees, A. and Fatikow, S. 2009. Investigation of a new process chain based on atomic force microscopy scratching. Presented at: Fifth International Conference on Multi-Material Micro Manufacture, 4M2009, Karlsruhe, Germany, pp. 267-270.

Scholz, Steffen Gerhard, Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Lalev, Georgi Maximov and Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651 2009. New process chains for replicating micro and nano structured surfaces with bio-mimetic applications. Presented at: Society of Plastics Engineers Annual Technical Conference (ANTEC2009), Chicago, USA, pp. 3021-3027.

Scholz, Steffen Gerhard, Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Griffiths, Christian Andrew, Hirshy, Hassan ORCID: https://orcid.org/0000-0003-0281-3681 and Dimov, Stefan Simeonov 2009. Process chain for replicating bio inspired micro structured surfaces. Presented at: 4M 2009: 6th International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, 23-25 September 2009. Published in: Saile, V. and Ehmann, K. eds. Proceedings of 4M 2009: 6th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, pp. 271-274. 10.3850/4M2009RP001_9054

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2008. Variability in Measurements of Micro Lengths with a White Light Interferometer. Quality and Reliability Engineering International 24 (8) , pp. 881-890. 10.1002/qre.903

Griffiths, C.A., Dimov, S.S. and Brousseau, E.B. ORCID: https://orcid.org/0000-0003-2728-3189 2008. Microinjection moulding: The influence of runner systems on flow behaviour and melt fill of multiple microcavities. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1119-1130. 10.1243/09544054JEM1084

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Packianather, Michael Sylvester ORCID: https://orcid.org/0000-0002-9436-8206 2008. The finite element analysis of melt flow behaviour in micro-injection moulding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1107-1118. 10.1243/09544054JEM965

Mattsson, L., Bolt, P. J., Azcarate, S., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Fillon, B, Fowler, C., Gelink, E., Griffiths, C., Khan, Malek C., Marson, S., Retolaza, S., Schneider, A., Schoth, A., Temun, A., Tiquet, P. and Tosello, G. 2008. Reliability of surface roughness measurements of micro features - experiences of a round robin test with nine 4M laboratories. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, 9-11 September 2008. Published in: Menz, Wolfgang and Dimov, Stefan eds. 4M 2008: Proceedings of the 4th International Conference on Multi-material Micro Manufacture. Whittles,

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Chouquet, C., Gavillet, J. and Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727 2008. Micro-injection moulding: surface treatment effects on part demoulding. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 245-248.

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Packianather, Michael Sylvester ORCID: https://orcid.org/0000-0002-9436-8206 2008. Micro injection moulding: simulation of melt flow behaviour. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 267-270.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2008. Knowledge acquisition techniques for feature recognition in CAD models. Journal of Intelligent Manufacturing 19 (1) , pp. 21-32. 10.1007/s10845-007-0043-7

Griffiths, C. A., Dimov, Stefan Simeonov and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2008. Micro injection moulding: the influence of runner systems on flow behaviour and melt fill of multiple microcavities. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1119-1130. 10.1243/09544054JEM1084

Griffiths, C. A., Dimov, Stefan Simeonov and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2008. Micro injection moulding: an experimental study on the relationship between the filling of micro parts and runner designs. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 217-220.

Matovic, J., Kettle, J., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Adamovic, N. 2008. Patterning of nanomembranes with a focused-ion-beam. Presented at: 26th International Conference on Microelectronics( MIEL 2008), Nis, Serbia, pp. 103-106.

Krohs, F., Luttermann, T., Stolle, C., Fatikow, S., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Dimov, Stefan Simeonov 2008. Towards automation in AFM based nanomanipulation and electron beam induced deposition for microstructuring. Presented at: International Conference on Multi-Material Micro Manufacture, Cardiff, UK, 9-11 September 2008. Published in: Menz, Wolfgang and Dimov, Stefan Simeonov eds. 4M 2008: Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, Wales. Dunbeath: Whittles, pp. 118-123.

Rees, Andrew, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov, Gruber, H. and Paganetti, I. 2008. Wire electro discharge grinding: surface finish optimisation. Presented at: 4th International Conference on Multi-Material Micro Manufacture, Cardiff, UK, pp. 233-236.

Griffiths, C.A., Dimov, S.S., Brousseau, E.B. ORCID: https://orcid.org/0000-0003-2728-3189 and Hoyle, R.T. 2007. The effects of tool surface quality in micro-injection moulding. Journal of Materials Processing Technology 189 (1-3) , pp. 418-427. 10.1016/j.jmatprotec.2007.02.022

Charmeux, J.-F., Minev, R., Dimov, S., Brousseau, E. ORCID: https://orcid.org/0000-0003-2728-3189, Minev, E. and Harrysson, U. 2007. Benchmarking of three processes for producing castings incorporating micro/mesoscale features with a high aspect ratio. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (4) , pp. 577-589. 10.1243/09544054JEM693

Dimov, S.S., Brousseau, E.B. ORCID: https://orcid.org/0000-0003-2728-3189 and Setchi, R. 2007. A hybrid method for feature recognition in computer-aided design models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (1) , pp. 79-96. 10.1243/09544054JEM437

Charmeux, J. F., Minev, R., Dimov, Stefan, Minev, Ekaterin, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Harrysson, U. 2007. Benchmarking of three processes for producing castings incorporating micro/meso-scale features with a high aspect ratio. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (4) , pp. 577-588. 10.1243/09544054JEM693

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Hoyle, R. T. 2007. The effects of tool surface quality in micro injection moulding. Journal of Materials Processing Technology 189 (1-3) , pp. 418-427. 10.1016/j.jmatprotec.2007.02.022

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2007. A hybrid method for feature recognition in CAD models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , pp. 79-96.

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2007. Critical analysis of an existing calibration procedure built in a white light interferometer microscope and proposal of an alternative spline-based approach. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. 4m 2007 : third International Conference on Multi-material Micro Manufacture : 3rd-5th October 2007, Borovets, Bulgaria. Dunbeath: Whittles, pp. 169-172.

Griffiths, C. A., Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Worgull, M., Heckele, M., Nestler, J. and J., Auerswald 2007. Polymer insert tooling for prototyping of micro fluidic components in micro injection moulding. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. Proceedingsof the 3rd International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 305-308.

Pham, Duc Truong, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Bigot, Samuel ORCID: https://orcid.org/0000-0002-0789-4727, Dobrev, T., Ferri, C., Gandarias, Endika, Hoyle, R. T., Griffiths, C. A., Kettle, J., Lalev, G. M., Li, W., Matthews, C. W., Minev, Roussi, Petkov, Petko Vladev ORCID: https://orcid.org/0000-0003-2185-2651, Packianather, Michael Sylvester ORCID: https://orcid.org/0000-0002-9436-8206, Petrelli, A., Popov, Krastimir Borisov, Rees, A., Sha, B., Thomas, A. and Zhao, H. 2007. Recent advances in micro and nano manufacturing. Presented at: Proceedings of 4th International Conference on Digital Enterprise Technology (DET2007), Bath, UK, pp. 24-33.

Ferri, C., Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov and Mattsson, L. 2006. Repeatability analysis of two methods for height measurements in the micrometer range. Presented at: 4M2006: Second International Conference on Multi-Material Micro Manufacture, Grenoble, France, 22-26 September 2006. Published in: Dimov, S., Menz, W. and Fillon, B. eds. 4M 2006 - Second International Conference on Multi-Material Micro Manufacture (Grenoble, France, 22-26 September 2006). Elsevier, pp. 165-168.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Dimov, Stefan Simeonov and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2006. Learning and reasoning techniques for automatic feature recognition for CAD models. Presented at: I*PROMS'06 Innovative Production Machines and Systems, Cardiff, UK, pp. 77-82.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2005. Automatic extraction of rules for feature recognition in solid models. Presented at: 1st I*PROMS: Intelligent Production Machines and Systems, Online, 4-15 July 2005. Published in: Pham, D. ed. Intelligent Production Machines And Systems - First I*proms Virtual Conference Proceedings. Elsevier, pp. 49-54.

Pham, Duc Truong, Dimov, Stefan Simeonov, Setchi, Rossitza M. ORCID: https://orcid.org/0000-0002-7207-6544, Peat, Bernard, Soroka, Anthony John ORCID: https://orcid.org/0000-0002-9738-9352, Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189, Huneiti, Ammar M., Lagos, Nikolaos, Noyvirt, Alexander Emilov, Pasantonopoulos, Charilaos, Tsaneva, Daniela K. and Tang, Qiao 2004. Product lifecycle management for performance support. Journal of Computing and Information Science in Engineering 4 (4) , pp. 305-315. 10.1115/1.1818687

Dimov, Stefan Simeonov, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 and Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2004. Automatic feature recognition a hybrid approach. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 04) (Bath,UK). University of Bath, p. 59.

Brousseau, Emmanuel Bruno Jean Paul ORCID: https://orcid.org/0000-0003-2728-3189 2004. Intelligent techniques for automatic feature recognition in CAD models. PhD Thesis, Cardiff University.
file

This list was generated on Tue Mar 19 03:59:56 2024 GMT.