Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Browse by All Cardiff Authors

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 52.

Al-Jumaili, Safaa Kh, Eaton, Mark J., Holford, Karen M., Pearson, Matthew R., Crivelli, Davide and Pullin, Rhys 2018. Characterisation of fatigue damage in composites using an Acoustic Emission Parameter Correction Technique. Composites Part B: Engineering 151 , pp. 237-244. 10.1016/j.compositesb.2018.06.020
file

Clarke, Alastair, Cahill, Ben, Pullin, Rhys and Holford, Karen 2018. Damage detection in high performance gears using a magnetoelastic sensor to measure rate of change of torque. Presented at: Leeds-Lyon Symposium on Tribology, Leeds, 4-7 September 2018.
file

Al-Azzawi, Ahmad, McCrory, John, Kawashita, Luiz, Featherston, Carol, Pullin, Rhys and Holford, Karen 2017. Buckling and postbuckling behaviour of glare laminates containing splices and doublers. Part 1: instrumented tests. Composite Structures 176 , pp. 1158-1169. 10.1016/j.compstruct.2017.04.030
file

Pearson, Matthew R., Eaton, Mark Jonathan, Featherston, Carol Ann, Pullin, Rhys and Holford, Karen Margaret 2017. Improved acoustic emission source location during fatigue and impact events in metallic and composite structures. Structural Health Monitoring 16 (4) , pp. 382-399. 10.1177/1475921716672206
file

Cockerill, Aaron, Clarke, Alastair, Pullin, Rhys, Bradshaw, T., Cole, P. and Holford, Karen Margaret 2016. Determination of rolling element bearing condition via acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230 (11) , pp. 1377-1388. 10.1177/1350650116638612
file

Al-Jumaili, Safaa Kh., Pearson, Matthew R., Holford, Karen Margaret, Eaton, Mark Jonathan and Pullin, Rhys 2016. Acoustic emission source location in complex structures using full automatic delta T mapping technique. Mechanical Systems and Signal Processing 72-73 , pp. 513-524. 10.1016/j.ymssp.2015.11.026
file

Cockerill, Aaron, Clarke, Alastair, Pullin, Rhys, Holford, Karen Margaret, Bradshaw, Timothy and Cole, Philip 2015. Acoustic emission as an aid to understanding raceway damage in rolling element bearings [Abstract]. Presented at: 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, 7-9 September 2015. Proceedings of the 42nd Leeds-Lyon Symposium on Tribology. Lyon: p. 1.
file

Cockerill, Aaron, Holford, Karen, Bradshaw, Timothy, Cole, Phil, Pullin, Rhys and Clarke, Alastair 2015. Use of high frequency analysis of acoustic emission signals to determine rolling element bearing condition. Journal of Physics. Conference Series 628 , 012074. 10.1088/1742-6596/628/1/012074

Al-Jumaili, Safaa, Holford, Karen Margaret, Eaton, Mark Jonathan and Pullin, Rhys 2015. Parameter Correction Technique (PCT): A novel method for acoustic emission characterisation in large-scale composites. Composites: Part B Engineering 75 , pp. 336-344. 10.1016/j.compositesb.2015.01.044

Crivelli, Davide, Guagliano, Mario, Eaton, Mark, Pearson, Matthew R., Al-Jumaili, Safaa Kh., Holford, Karen Margaret and Pullin, Rhys 2015. Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission. Composites: Part B Engineering 74 , pp. 1-12. 10.1016/j.compositesb.2014.12.032
file

Al-Jumaili, Safaa Kh., Holford, Karen Margaret, Eaton, Mark, McCrory, John, Pearson, Matthew R. and Pullin, Rhys 2015. Classification of acoustic emission data from buckling test of carbon fibre panel using unsupervised clustering techniques. Structural Health Monitoring 14 (3) , pp. 241-251. 10.1177/1475921714564640

McCrory, John, Al-Jumaili, Safaa Kh., Crivelli, Davide, Pearson, Matthew R., Eaton, Mark Jonathan, Featherston, Carol Ann, Guagliano, Mario, Holford, Karen Margaret and Pullin, Rhys 2015. Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques. Composites: Part B Engineering 68 , pp. 424-430. 10.1016/j.compositesb.2014.08.046
file

Al-Azzawi, Ahmad, McCrory, John, Kawashita, Luiz, Featherston, Carol, Pullin, Rhys and Holford, Karen 2015. Buckling and postbuckling behaviour of glare laminates containing splices and doublers: experimental and numerical investigation. Presented at: 3rd International Conf erence on Buckling and Postbuckling Behaviour of Composite Laminated Structures, Braunschweig, Germany, 25-27 March 2015. S65-S65.

Pearson, Matthew R., Eaton, Mark Jonathan, Featherston, Carol Ann, Pullin, Rhys and Holford, Karen Margaret 2015. Improved acoustic emission damage source location during fatigue testing of complex structures. Proceedings of the 34th Conference and the 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, ICAF, pp. 846-853.

Al-Jumaili, Safaa Kh., Eaton, Mark Jonathan, Holford, Karen Margaret, McCrory, John and Pullin, Rhys 2014. Damage characterisation in composite materials under buckling test using acoustic emission waveform clustering technique. Presented at: The 53rd Annual Conference of The British Institute of Non-Destructive Testing, Manchester, UK, 9-11 September 2014.

Al-Azzawi, Ahmad, McCrory, John, Kawashita, Luiz, Featherston, Carol, Pullin, Rhys and Holford, Karen 2014. Delamination characteristics of splices and doublers in glare laminates during buckling. Presented at: 11th World Congress on Computational Mechanics (WCCM XI), Barcelona,Spain, 25 July 2014. S65-S65.

Marks, Ryan, Pullin, Rhys, Clarke, Alastair, Holford, Karen Margaret, Featherston, Carol Ann and Kawashita, Luiz 2014. Optimisation of acoustic emission sensor positioning on aerospace structures using 3D scanning laser vibrometry. Presented at: 16th International Conference on Experimental Mechanics, Cambridge, UK, 7 - 11 July 2014.

Crivelli, Davide, Eaton, Mark, Pearson, Matthew R., Holford, Karen Margaret and Pullin, Rhys 2014. Chebyshev descriptors for SHM with acoustic emission and acousto ultrasonics. International Journal of Structural Integrity 5 (3) , pp. 202-213. 10.1108/IJSI-04-2014-0013
file

Cockerill, Aaron, Clarke, Alastair, Holford, Karen Margaret, Bradshaw, Tim, Cole, Phillip and Pullin, Rhys 2014. Damage assessment of rolling element bearings using acoustic emission. Presented at: 16th International Workshop on Experimental Mechanics, Cambridge, UK, 7 - 11 July 2014.

Pearson, Matthew R., Eaton, Mark Jonathan, Pullin, Rhys, Featherston, Carol Ann and Holford, Karen Margaret 2014. Airborne acoustic damage location for structural health monitoring applications. Presented at: ICEM 16 - 16th International Conference on Experimental Mechanics, Cambridge, England, 7-11 July 2014.

Al-Jumaili, Safaa Khairry, Eaton, Mark, Holford, Karen Margaret and Pullin, Rhys 2014. A Parameter Correction Technique (PCT) for acoustic emission characterisation in large-scale composites. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE), Dresden, Germany, 3-5 September 2014. pp. 1-8.

McCrory, John, Al-Jumaili, Safaa Khairry, Pearson, Matthew, Eaton, Mark Jonathan, Holford, Karen Margaret and Pullin, Rhys 2014. Automated corrected MAR calculation for characterisation of AE signals. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE), Dresden, Germany, 3-5 September 2014.

Shahidan, Shahiron, Pullin, Rhys, Muhamad Bunnori, Norazura and Holford, Karen Margaret 2013. Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Materials 45 , pp. 78-85. 10.1016/j.conbuildmat.2013.03.095

Kural, Aleksander, Pullin, Rhys, Holford, Karen Margaret, Lees, Jonathan, Naylon, Alexander Jack, Paget, Christophe and Featherston, Carol Ann 2013. Design and characterization of an ultrasonic lamb-wave power delivery system. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 60 (6) , pp. 1134-1140. 10.1109/TUFFC.2013.2676

Elfergani, Hisham A., Pullin, Rhys and Holford, Karen Margaret 2013. Damage assessment of corrosion in prestressed concrete by acoustic emission. Construction and Building Materials 40 , pp. 925-933. 10.1016/j.conbuildmat.2012.11.071

Crivelli, Davide, Guagliano, M., McCrory, John, Al-Jumaili, Safaa Khairry, Eaton, Mark Jonathan, Pearson, Matthew Robert, Holford, Karen Margaret and Pullin, Rhys 2013. Classification of acoustic emission data from Buckling Test of carbon fiber panel using neural networks. Presented at: 3rd European Aeronautics Science Network Workshop on Aerostructures, Milan, Italy, 11 October 2013.

Featherston, Carol, Holford, Karen Margaret, Pullin, Rhys, Lees, Jonathan, Eaton, Mark Jonathan and Pearson, Matthew R. 2013. An autonomous structural health monitoring solution. Presented at: Microtechnologies 2013, Grenoble, France, 24-26 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. Society of Photo-Optical Instrumentation Engineers (SPIE), p. 876302. 10.1117/12.2018401

Featherston, Carol Ann, Eaton, Mark Jonathan and Holford, Karen Margaret 2012. Modelling the effects of geometric imperfections on the buckling and initial post-buckling behaviour of flat plates under compression using measured data. Strain 48 (3) , pp. 208-215. 10.1111/j.1475-1305.2011.00813.x

Muhamad Bunnori, Norazura, Lark, Robert John and Holford, Karen Margaret 2011. The use of acoustic emission for the early detection of cracking in concrete structures. Magazine of Concrete Research 63 (9) , pp. 683-688. 10.1680/macr.2011.63.9.683

Eaton, Mark Jonathan, Pullin, Rhys, Hensman, J. J., Holford, Karen Margaret, Worden, K. and Evans, Samuel Lewin 2011. Principal component analysis of acoustic emission signals from landing gear components: an aid to fatigue fracture detection. Strain 47 (Supp.1) , e588-e594. 10.1111/j.1475-1305.2009.00661.x

Pullin, Rhys, Clarke, Alastair, Eaton, Mark Jonathan, Holford, Karen Margaret, Evans, Samuel Lewin and McCrory, John 2010. Detection of cracking in gear teeth using acoustic emission. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7-9 September 2010.

Featherston, Carol Ann, Eaton, Mark Jonathan, Evans, Samuel Lewin, Holford, Karen Margaret, Pullin, Rhys and Cole, Matthew 2010. Development of a methodology to assess mechanical impulse effects resulting from lightning attachment to lightweight aircraft structure. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7 - 9 September.

Pullin, Rhys, Clarke, Alastair, Eaton, Mark Jonathan, Holford, Karen Margaret, Evans, Samuel Lewin and McCory, J. P. 2010. Detection of cracking in gear teeth using Acoustic Emission. Applied Mechanics and Materials 24-25 , pp. 45-50. 10.4028/www.scientific.net/AMM.24-25.45

Davies, Huw Charles, Holford, Karen Margaret, Assoune, A., Trioulier, B. and Courtney, W. 2009. Pedestrian protection using a shock absorbing liquid (SALi) based bumper system. Presented at: 21st International Technical Conference on the Enhanced Safety of Vehicles, Stuttgart, Germany, , vol. 09-002.

Featherston, Carol Ann, Eaton, Mark. Jonathan., Pullin, Rhys and Holford, Karen Margaret 2009. Structural health monitoring of buckling composite structures using acoustic emission. Presented at: International Conference on Computational and Experimental Engineering Sciences, Phuket, Thailand,

Eaton, Mark Jonathan, Pullin, Rhys, Holford, Karen Margaret and Featherston, Carol Ann 2008. AE wave propagation and novel source location in composite plates. Presented at: 28th European Conference on Acoustic Emission, Krakow, Poland,

Featherston, Carol Ann, Eaton, Mark Jonathan and Holford, Karen Margaret 2008. Imperfection sensitivity in plates - An assessment using DIC, SEM XI. Presented at: SEM XI International Congress & Exposition on Experimental and Applied Mechanics, Orlando, FL, 2 - 5 June 2008.

Pullin, Rhys, Holford, Karen Margaret, Lark, Robert John and Eaton, Mark Jonathan 2008. Acoustic emission monitoring of bridge structures in the field and laboratory. Journal of Acoustic Emission 26 , pp. 172-181.

Eaton, Mark Jonathan, Holford, Karen Margaret, Featherston, Carol Ann and Pullin, Rhys 2007. An investigation of frequency as an acoustic emission signal discriminator in carbon fibre composite materials. Presented at: 6th International Conference on Acoustic Emission, (ICAE6), Lake Tahoe, Nevada, USA, pp. 312-217.

Pullin, Rhys, Hensman, J. J., Holford, Karen Margaret, Worden, K. and Evans, Samuel Lewin 2007. Principal component analysis of acoustic emission signals from a landing gear component. Key Engineering Materials 347 , pp. 139-144.

Pullin, Rhys, Holford, Karen Margaret and Evans, Samuel Lewin 2007. Confidence of detection of fractures using acoustic emission signals. Applied Mechanics and Materials 07-08 , pp. 147-152. 10.4028/www.scientific.net/AMM.7-8.147

Pullin, Rhys, Theobald, P., Holford, Karen Margaret and Evans, Samuel Lewin 2007. A Numerical Determination of Acoustic Emission Sensor Response in Plates Using Dispersion Curves. Key Engineering Materials 347 , pp. 381-386. 10.4028/www.scientific.net/KEM.347.381

Pullin, Rhys, Holford, Karen Margaret, Evans, Samuel Lewin and Baxter, M. G. 2006. Acoustic emission testing of a landing gear component. Advanced Materials Research 13-14 , pp. 29-34. 10.4028/www.scientific.net/AMR.13-14.29

Pullin, Rhys, Theobald, P., Holford, Karen Margaret and Evans, Samuel Lewin 2006. Experimental validation of dispersion curves in plates for acoustic emission. Advanced Materials Research 13-14 , pp. 53-60. 10.4028/www.scientific.net/AMR.13-14.53

Eaton, Mark Jonathan, Ann, Featherston Carol, Holford, Karen Margaret and Pullin, Rhys 2005. Buckling and postbuckling of impact damaged composite plates. Presented at: SEM Annual Conference, Portland, USA,

Featherston, Carol Ann, Holford, Karen Margaret, Holt, Catherine Avril, Manning, D. and Claisse, A. 2005. Measuring the torsional stiffness of a space frame chassis using 3D motion capture techniques. Presented at: 4th International Conference on Advances in Experimental Mechanics, Southampton, UK, 6-8 September 2005. Published in: Dulieu-Barton, J. M. and Quinn, S. eds. Advances in experimental mechanics IV : proceedings of the 4th International Conference on Advances in Experimental Mechanics. London: Trans-Tech Publications, pp. 423-428.

Pullin, Rhys, Holford, Karen Margaret and Baxter, M. G. 2005. Modal analysis of acoustic emission signals from artificial and fatigue crack sources in aerospace grade steel. Key Engineering Materials 293-29 , pp. 217-224. 10.4028/www.scientific.net/KEM.293-294.217

Pullin, Rhys, Holford, Karen Margaret and Lark, Robert John 2004. Christchurch Hill (Royal Oak) Overbridge: an investigation of the use of acoustic emission to monitor the behaviour of the thrust hinges. [Project Report].

Pullin, Rhys, Holford, Karen Margaret and Lark, Robert John 2004. An investigation of the use of acoustic emission to monitor hinge joints. [Project Report].

Evans, Samuel Lewin, Thomas, K., Pullen, R. and Holford, Karen Margaret 2003. Problems in the fatigue testing of PMMA bone cements. Presented at: Proceedings of the 2nd International Conference on New Biomedical Materials, Cardiff, UK,

Pullin, Rhys, Holford, Karen Margaret, Lark, Robert John and Beck, P. 2003. Acoustic emission assessment of concrete hinge joints. Key Engineering Materials 245-24 , pp. 323-330.

Pullin, Rhys, Carter, D. C. and Holford, Karen Margaret 1999. Damage assessment in steel bridges. Presented at: International Conference on Damage Assessment of Structures (DAMAS 99), Dublin, Ireland, 28-30 June 1999. Published in: Gilchrist, M. D., Dulieu-Barton, J. M. and Worden, K. eds. Damage Assessment of Structures. Key Engineering Materials , vol. 167/68. Durnten-Zurich: Trans Tech Publications, pp. 335-342.

This list was generated on Sat Dec 14 10:29:59 2019 GMT.