Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

An integrated approach to tool life management

Ahmed, Zinah 2018. An integrated approach to tool life management. PhD Thesis, Cardiff University.
Item availability restricted.

[thumbnail of 122098 DEC PAGES REMOVED.pdf]
Preview
PDF - Accepted Post-Print Version
Download (3MB) | Preview
[thumbnail of AhmedZJ.pdf] PDF - Supplemental Material
Restricted to Repository staff only

Download (162kB)

Abstract

Tool wear is a complex phenomenon occurring in all metal cutting processes. It reduces dimensional accuracy, impairs the surface integrity of the component and can have profound effects on the overall quality of the machined workpiece. Tool condition monitoring methods can be broadly split based on the source of signals collected by sensors into direct and indirect methods. In real life, it is not simple to model or predict. This thesis considers current shortcomings in applied approaches to tool management to demonstrate the need for more accurate assessment of tool condition and particularly remaining tool life. In this study, two kinds of indirect acquisition methods were used to estimate the tool wear. The post process method utilises the measurement of component geometry using a Coordinate Measure Machine. The in-process method utilises the acquisition and analysis of the applied spindle load from which tool wear can be estimated. A series of tests were conducted based upon the machining of a set of cylindrical holes. Two different diameter tools, 10 mm and 16 mm end mills, were used. The CMM acquired component geometry was used to calculate the tool wear indirectly. The method was proved to provide a good indication of the tool wear behaviour. In particular the approach is shown to be helpful for identifying the important change in the rate of tool wear. The developed online monitoring system, using the spindle motor load signal, is introduced in this thesis. It provides a practical method for detecting the progression of flank wear during machining. The results concluded that the signal amplitudes are increased when the flank wear increases. High cutting speed cause the flank wear to form quickly and shorten the tool life. This is an efficient and low-cost method that, with further development and testing, can be used in the real machining industry to predict the actual wear in the cutting tool.

Item Type: Thesis (PhD)
Date Type: Completion
Status: Unpublished
Schools: Engineering
Uncontrolled Keywords: Tool Wear Monitoring; Component Geometry; Spindle Motor Load; Tool Life Management; Volume of Metal Removed; Radial Tool Wear Calculation.
Date of First Compliant Deposit: 2 May 2019
Last Modified: 10 Jun 2021 14:47
URI: https://orca.cardiff.ac.uk/id/eprint/122098

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics