Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Control of an axial flow tidal stream turbine

Whitby, Benjamin 2013. Control of an axial flow tidal stream turbine. PhD Thesis, Cardiff University.
Item availability restricted.

[img]
Preview
PDF - Accepted Post-Print Version
Download (7MB) | Preview
[img] PDF - Supplemental Material
Restricted to Repository staff only

Download (82kB)

Abstract

Tidal stream turbines have the potential to generate electricity from a renewable source that is highly predictable and non-polluting. The United Kingdom’s geographical location means that it has one of the most significant wave and tidal resources in the world. The implications of controlling horizontal axial flow, variable speed tidal stream turbines for the purpose of optimising energy capture, regulating power and reducing mechanical loads has been investigated. The research was separated into two main areas: control of the turbine in below rated flow speeds where the objective was to maximise energy capture, and control of the turbine in high flow speeds where the aim was to regulate power, shed load and ensure the survivability of the turbine. A control strategy that maximises the power output of a tidal stream turbine in below rated flow speeds, by allowing the rotor speed to be varied, was implemented. The performance of the control strategy was assessed in simulation and then implemented on a hardware in the loop test rig. In both cases the controller performed well and was able to maximise power output from the turbine by varying the rotor speed to maintain the optimum tip speed ratio. Two control strategies for regulating the output power from a tidal stream turbine in high flow speeds were investigated and compared. The first strategy relies on adjusting the pitch angle of the rotor blades to regulate power and the second assumes fixed pitch rotor blades and relies on the stall characteristic of the blades to regulate power. Models of both the pitch and stall regulated turbines were developed and simulated using the commercially available software GH Tidal Bladed®. The control system design behind both strategies was developed in Matlab. Following control implementation a comparison of each model was carried out in terms of performance under turbulent flows, loading and energy yield. Following the comparison it was concluded that the performance of the pitch regulated tidal stream turbine was superior to that of the stall regulated turbine. The research also revealed that the dynamics of each turbine model are significantly different for above rated flow speed operation. This has implications on controller design and loading experienced by each tidal stream turbine

Item Type: Thesis (PhD)
Status: Unpublished
Schools: Engineering
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Uncontrolled Keywords: Tidal stream turbine; Tidal power; Marine engery; Control; Pitch regulation; Stall regulation
Date of First Compliant Deposit: 30 March 2016
Last Modified: 19 Mar 2016 23:34
URI: http://orca-mwe.cf.ac.uk/id/eprint/56450

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics