Frequency synchronization techniques in wireless communication

Yu, Qiang 2007. Frequency synchronization techniques in wireless communication. PhD Thesis, Cardiff University.

PDF - Accepted Post-Print Version Download (4MB)

Abstract

In this thesis various iterative channel estimation and data detection techniques for time-varying frequency selective channels with multiple frequency offsets are proposed. Firstly, a maximum likelihood approach for the estimation of complex multipath gains (MGs) and real Doppler shifts (DSs) for a single input "single output (SISO) frequency selective channel is proposed. In a time di vision multiple access (TDMA) system, for example the third-generation global system, or mobile GSM communications, the pilot symbols are generally inadequate to provide enough resolution to estimate frequency offsets. Therefore, our approach is to use the pilot sequence for the estimation and equalization of the channel without consideration to frequency offsets, and then to use the soft estimates of the transmitted signal as a long pilot sequence to determine iteratively the multiple frequency offsets and refine the channel estimates. Inter-symbol interference (ISI) is removed with a linear structure turbo equalizer where the filter coefficients are chosen based on the minimum mean square error (MMSE) criterion. The detection performance is verified using the bit error rate (BER) curves and the frequency offset estimation performance through comparison with appropriate Cramer-Rao lower bounds. This work is then extended for a multi-user transmission system where the channel is modelled as a multi input multi output (MIMO) TDMA system. For the iterative channel estimation, the MIMO frequency selective channel is decoupled into multiple SISO flat fading sub-channels through appropriately cancelling both inter-symbol-interference (ISI) and inter-user-interference (IUI) from the received signal. The refined channel estimates and the corresponding frequency offset estimates are then obtained for each resolved MIMO multipath tap. Simulation results confirm a superior BER and estimation performance. Finally, these iterative equalization and estimation techniques are ex tended to orthogonal frequency division multiplexing (OFDM) based SISO and MIMO systems. For OFDM, the equalization is performed in two stages. In the first stage, the channel and the frequency offsets are estimated in the time domain, while in the second stage, the transmitted symbols are estimated in the frequency domain and the mean values and the variances of the symbols are determined in the frequency domain. These two procedures interact in an iterative manner, exchanging information between the time and frequency domains. Simulation studies show that the proposed iterative scheme has the ability to track frequency off sets and provide a superior BER performance as compared to a scheme that does not track frequency offsets.

Item Type:	Thesis (PhD)
Status:	Unpublished
Schools:	Engineering
Subjects:	T Technology > TK Electrical engineering. Electronics Nuclear engineering
ISBN:	9781303209376
Date of First Compliant Deposit:	30 March 2016
Last Modified:	05 Dec 2014 16:24
URI:	https://orca.cardiff.ac.uk/id/eprint/54596

Actions (repository staff only)

Edit Item