Using bearing area parameters to quantify early erosive tooth surface changes in enamel: a pilot study

Field, James ORCID: https://orcid.org/0000-0002-5462-4156, German, Matthew and Waterhouse, Paula 2013. Using bearing area parameters to quantify early erosive tooth surface changes in enamel: a pilot study. Journal of Dentistry 41 (11) , pp. 1060-1067. 10.1016/j.jdent.2013.08.015

Full text not available from this repository.

Abstract

Objectives Most in vitro studies investigate the erosive process using relatively simple roughness parameters such as roughness average (Ra). In isolation, Ra may misrepresent the surface features. Further, few studies report baseline surface characteristics after sample preparation. This study aimed to test the hypothesis that measuring the bearing area parameters in addition to Ra may be useful when qualifying the surface of enamel at baseline and after an erosive challenge. The null hypothesis for this study was that the bearing area parameters provide no more useful information than Ra alone, when qualifying the surface of enamel at baseline and after an erosive challenge. Methods Enamel slabs (n = 20) were prepared from human (n = 2) and bovine (n = 4) incisor teeth and polished with 0.05 μm paste. Roughness average (Ra) and bearing parameters (MR1, MR2, Rpk, Rk, Rvk) were used to record baseline characteristics. Specimens were subjected to erosion with 1% citric acid solution for 1 min. Profilometric characteristics were recorded post-erosion, along with the maximum height changes within the profile. T-tests were carried out in order to compare baseline surface characteristics between tissue types. Post-erosion, analysis of variance (ANOVA) was used to test the effects of tissue type (bovine or human). Results There was no significant difference in Ra between human and bovine incisor enamel at baseline (human 0.11 μm, bovine 0.12 μm P > 0.05), and no significant difference was observed post-erosion (human 0.23 μm, bovine 0.20 μm P > 0.05). There were significant differences in bearing parameters at baseline and post-erosion that were not identified by the Ra measurement alone. Conclusions The results suggest that if Ra alone is measured, important differences in surface characteristics may be missed. The null hypothesis is rejected, and the recommendation is made that bearing parameters are included within profile measurements in order to further triangulate the results of surface analysis studies. Clinical relevance In isolation, Ra may misrepresent the surface features of a profile. These results have shown that the bearing parameters are an important and informative set of measurements. The recommendation is made that bearing parameters are included within profile measurements at baseline and post-erosion, in order to further triangulate the results of surface analysis studies.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Dentistry
Publisher:	Elsevier
ISSN:	0300-5712
Date of Acceptance:	22 August 2013
Last Modified:	07 Nov 2022 10:34
URI:	https://orca.cardiff.ac.uk/id/eprint/132713

Citation Data

Cited 12 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item