Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting

Feng, Qixiang, Tang, Qian, Liu, Ying ORCID: https://orcid.org/0000-0001-9319-5940, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544, Soe, Shwe, Ma, Shuai and Bai, Long 2018. Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting. International Journal of Advanced Manufacturing Technology 94 (5-8) , pp. 2301-2313. 10.1007/s00170-017-0932-7

Full text not available from this repository.

Abstract

Selective laser melting (SLM) is a transformative manufacturing process due to its ability to manufacture complex metal parts directly from various bulk powders.With the capability of reducing powder consumption and decreasing fabrication times, lattice structures, which are used as infilling materials within hollow parts, offer an effective solution for decreasing the high costs that currently impede the wider application of SLM in various industries. The assessment of mechanical properties of SLM-built lattice structures, however, remain challenging due to their complicated geometries, while pursuing experimental studies proves to be timeconsuming due to the requirement of numerous part fabrication and physical testing. To address these research challenges, this study proposes an analytical modelling approach conducting quasi-static analysis on Ti6Al4V (Ti64) lattice structures. In order to investigate the structures’ mechanical properties, dynamic balance equation of the structures under compression loads were first established, and the stress distribution of the structures was calculated explicitly using central difference method. The modelling approach was validated by conducting uniaxial compression tests on samples fabricated using SLM. The experiments showed that the equivalent elastic modulus (E*) and the ultimate stress (UTS) values of the Ti64 structures predicted by the analytical method were in good agreement with the experimental results. The paper also discusses the design principles of SLM-built lattice structures (mainly the selection of proper topologies and relative densities)and examines the necessity and flexibility of the proposed analytical approach compared with conventional theoretical methods and their experimental studies in the context of SLM process.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Publisher: Springer Verlag (Germany)
ISSN: 0268-3768
Date of First Compliant Deposit: 13 October 2017
Date of Acceptance: 8 August 2017
Last Modified: 06 Jul 2023 10:08
URI: https://orca.cardiff.ac.uk/id/eprint/105490

Citation Data

Cited 54 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item